Hey Punit, Could you start Glusterd in debug mode and provide the logs here? To start it in debug mode, append '-LDEBUG' to the ExecStart line in the service file.
~kaushal On Mon, Dec 1, 2014 at 9:05 AM, Punit Dambiwal <hypu...@gmail.com> wrote: > Hi, > > Can Any body help me on this ?? > > On Thu, Nov 27, 2014 at 9:29 AM, Punit Dambiwal <hypu...@gmail.com> wrote: >> >> Hi Kaushal, >> >> Thanks for the detailed reply....let me explain my setup first :- >> >> 1. Ovirt Engine >> 2. 4* host as well as storage machine (Host and gluster combined) >> 3. Every host has 24 bricks... >> >> Now whenever the host machine reboot...it can come up but can not join the >> cluster again and through the following error "Gluster command [<UNKNOWN>] >> failed on server.." >> >> Please check my comment in line :- >> >> 1. Use the same string for doing the peer probe and for the brick address >> during volume create/add-brick. Ideally, we suggest you use properly >> resolvable FQDNs everywhere. If that is not possible, then use only IP >> addresses. Try to avoid short names. >> --------------- >> [root@cpu05 ~]# gluster peer status >> Number of Peers: 3 >> >> Hostname: cpu03.stack.com >> Uuid: 5729b8c4-e80d-4353-b456-6f467bddbdfb >> State: Peer in Cluster (Connected) >> >> Hostname: cpu04.stack.com >> Uuid: d272b790-c4b2-4bed-ba68-793656e6d7b0 >> State: Peer in Cluster (Connected) >> Other names: >> 10.10.0.8 >> >> Hostname: cpu02.stack.com >> Uuid: 8d8a7041-950e-40d0-85f9-58d14340ca25 >> State: Peer in Cluster (Connected) >> [root@cpu05 ~]# >> ---------------- >> 2. During boot up, make sure to launch glusterd only after the network is >> up. This will allow the new peer identification mechanism to do its >> job correctly. >> >> I think the service itself doing the same job.... >> >> [root@cpu05 ~]# cat /usr/lib/systemd/system/glusterd.service >> [Unit] >> Description=GlusterFS, a clustered file-system server >> After=network.target rpcbind.service >> Before=network-online.target >> >> [Service] >> Type=forking >> PIDFile=/var/run/glusterd.pid >> LimitNOFILE=65536 >> ExecStart=/usr/sbin/glusterd -p /var/run/glusterd.pid >> KillMode=process >> >> [Install] >> WantedBy=multi-user.target >> [root@cpu05 ~]# >> -------------------- >> >> gluster logs :- >> >> [2014-11-24 09:22:22.147471] I [MSGID: 100030] [glusterfsd.c:2018:main] >> 0-/usr/sbin/glusterd: Started running /usr/sbin/glusterd version 3.6.1 >> (args: /usr/sbin/glusterd -p /var/run/glusterd.pid) >> [2014-11-24 09:22:22.151565] I [glusterd.c:1214:init] 0-management: >> Maximum allowed open file descriptors set to 65536 >> [2014-11-24 09:22:22.151599] I [glusterd.c:1259:init] 0-management: Using >> /var/lib/glusterd as working directory >> [2014-11-24 09:22:22.155216] W [rdma.c:4195:__gf_rdma_ctx_create] >> 0-rpc-transport/rdma: rdma_cm event channel creation failed (No such device) >> [2014-11-24 09:22:22.155264] E [rdma.c:4483:init] 0-rdma.management: >> Failed to initialize IB Device >> [2014-11-24 09:22:22.155285] E [rpc-transport.c:333:rpc_transport_load] >> 0-rpc-transport: 'rdma' initialization failed >> [2014-11-24 09:22:22.155354] W [rpcsvc.c:1524:rpcsvc_transport_create] >> 0-rpc-service: cannot create listener, initing the transport failed >> [2014-11-24 09:22:22.156290] I >> [glusterd.c:413:glusterd_check_gsync_present] 0-glusterd: geo-replication >> module not installed in the system >> [2014-11-24 09:22:22.161318] I >> [glusterd-store.c:2043:glusterd_restore_op_version] 0-glusterd: retrieved >> op-version: 30600 >> [2014-11-24 09:22:22.821800] I >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management: >> connect returned 0 >> [2014-11-24 09:22:22.825810] I >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management: >> connect returned 0 >> [2014-11-24 09:22:22.828705] I >> [glusterd-handler.c:3146:glusterd_friend_add_from_peerinfo] 0-management: >> connect returned 0 >> [2014-11-24 09:22:22.828771] I [rpc-clnt.c:969:rpc_clnt_connection_init] >> 0-management: setting frame-timeout to 600 >> [2014-11-24 09:22:22.832670] I [rpc-clnt.c:969:rpc_clnt_connection_init] >> 0-management: setting frame-timeout to 600 >> [2014-11-24 09:22:22.835919] I [rpc-clnt.c:969:rpc_clnt_connection_init] >> 0-management: setting frame-timeout to 600 >> [2014-11-24 09:22:22.840209] E >> [glusterd-store.c:4248:glusterd_resolve_all_bricks] 0-glusterd: resolve >> brick failed in restore >> [2014-11-24 09:22:22.840233] E [xlator.c:425:xlator_init] 0-management: >> Initialization of volume 'management' failed, review your volfile again >> [2014-11-24 09:22:22.840245] E [graph.c:322:glusterfs_graph_init] >> 0-management: initializing translator failed >> [2014-11-24 09:22:22.840264] E [graph.c:525:glusterfs_graph_activate] >> 0-graph: init failed >> [2014-11-24 09:22:22.840754] W [glusterfsd.c:1194:cleanup_and_exit] (--> >> 0-: received signum (0), shutting down >> >> Thanks, >> Punit >> >> >> >> >> On Wed, Nov 26, 2014 at 7:14 PM, Kaushal M <kshlms...@gmail.com> wrote: >>> >>> Based on the logs I can guess that glusterd is being started before >>> the network has come up and that the addresses given to bricks do not >>> directly match the addresses used in during peer probe. >>> >>> The gluster_after_reboot log has the line "[2014-11-25 >>> 06:46:09.972113] E [glusterd-store.c:2632:glusterd_resolve_all_bricks] >>> 0-glusterd: resolve brick failed in restore". >>> >>> Brick resolution fails when glusterd cannot match the address for the >>> brick, with one of the peers. Brick resolution happens in two phases, >>> 1. We first try to identify the peer by performing string comparisions >>> with the brick address and the peer addresses (The peer names will be >>> the names/addresses that were given when the peer was probed). >>> 2. If we don't find a match from step 1, we will then resolve all the >>> brick address and the peer addresses into addrinfo structs, and then >>> compare these structs to find a match. This process should generally >>> find a match if available. This will fail only if the network is not >>> up yet as we cannot resolve addresses. >>> >>> The above steps are applicable only to glusterfs versions >=3.6. They >>> were introduced to reduce problems with peer identification, like the >>> one you encountered >>> >>> Since both of the steps failed to find a match in one run, but >>> succeeded later, we can come to the conclusion that, >>> a) the bricks don't have the exact same string used in peer probe for >>> their addresses as step 1 failed, and >>> b) the network was not up in the initial run, as step 2 failed during >>> the initial run, but passed in the second run. >>> >>> Please let me know if my conclusion is correct. >>> >>> If it is, you can solve your problem in two ways. >>> 1. Use the same string for doing the peer probe and for the brick >>> address during volume create/add-brick. Ideally, we suggest you use >>> properly resolvable FQDNs everywhere. If that is not possible, then >>> use only IP addresses. Try to avoid short names. >>> 2. During boot up, make sure to launch glusterd only after the network >>> is up. This will allow the new peer identification mechanism to do its >>> job correctly. >>> >>> >>> If you have already followed these steps and yet still hit the >>> problem, then please provide more information (setup, logs, etc.). It >>> could be much different problem that you are facing. >>> >>> ~kaushal >>> >>> On Wed, Nov 26, 2014 at 4:01 PM, Punit Dambiwal <hypu...@gmail.com> >>> wrote: >>> > Is there any one can help on this ?? >>> > >>> > Thanks, >>> > punit >>> > >>> > On Wed, Nov 26, 2014 at 9:42 AM, Punit Dambiwal <hypu...@gmail.com> >>> > wrote: >>> >> >>> >> Hi, >>> >> >>> >> My Glusterfs version is :- glusterfs-3.6.1-1.el7 >>> >> >>> >> On Wed, Nov 26, 2014 at 1:59 AM, Kanagaraj Mayilsamy >>> >> <kmayi...@redhat.com> >>> >> wrote: >>> >>> >>> >>> [+gluster-us...@gluster.org] >>> >>> >>> >>> "Initialization of volume 'management' failed, review your volfile >>> >>> again", glusterd throws this error when the service is started >>> >>> automatically >>> >>> after the reboot. But the service is successfully started later >>> >>> manually by >>> >>> the user. >>> >>> >>> >>> can somebody from gluster-users please help on this? >>> >>> >>> >>> glusterfs version: 3.5.1 >>> >>> >>> >>> Thanks, >>> >>> Kanagaraj >>> >>> >>> >>> ----- Original Message ----- >>> >>> > From: "Punit Dambiwal" <hypu...@gmail.com> >>> >>> > To: "Kanagaraj" <kmayi...@redhat.com> >>> >>> > Cc: users@ovirt.org >>> >>> > Sent: Tuesday, November 25, 2014 7:24:45 PM >>> >>> > Subject: Re: [ovirt-users] Gluster command [<UNKNOWN>] failed on >>> >>> > server... >>> >>> > >>> >>> > Hi Kanagraj, >>> >>> > >>> >>> > Please check the attached log files....i didn't find any thing >>> >>> > special.... >>> >>> > >>> >>> > On Tue, Nov 25, 2014 at 12:12 PM, Kanagaraj <kmayi...@redhat.com> >>> >>> > wrote: >>> >>> > >>> >>> > > Do you see any errors in >>> >>> > > /var/log/glusterfs/etc-glusterfs-glusterd.vol.log or vdsm.log >>> >>> > > when >>> >>> > > the >>> >>> > > service is trying to start automatically after the reboot? >>> >>> > > >>> >>> > > Thanks, >>> >>> > > Kanagaraj >>> >>> > > >>> >>> > > >>> >>> > > On 11/24/2014 08:13 PM, Punit Dambiwal wrote: >>> >>> > > >>> >>> > > Hi Kanagaraj, >>> >>> > > >>> >>> > > Yes...once i will start the gluster service and then vdsmd >>> >>> > > ...the >>> >>> > > host >>> >>> > > can connect to cluster...but the question is why it's not started >>> >>> > > even it >>> >>> > > has chkconfig enabled... >>> >>> > > >>> >>> > > I have tested it in two host cluster environment...(Centos 6.6 >>> >>> > > and >>> >>> > > centos 7.0) on both hypervisior cluster..it's failed to reconnect >>> >>> > > in >>> >>> > > to >>> >>> > > cluster after reboot.... >>> >>> > > >>> >>> > > In both the environment glusterd enabled for next boot....but >>> >>> > > it's >>> >>> > > failed with the same error....seems it's bug in either gluster or >>> >>> > > Ovirt ?? >>> >>> > > >>> >>> > > Please help me to find the workaround here if can not resolve >>> >>> > > it...as >>> >>> > > without this the Host machine can not connect after >>> >>> > > reboot....that >>> >>> > > means >>> >>> > > engine will consider it as down and every time need to manually >>> >>> > > start >>> >>> > > the >>> >>> > > gluster service and vdsmd... ?? >>> >>> > > >>> >>> > > Thanks, >>> >>> > > Punit >>> >>> > > >>> >>> > > On Mon, Nov 24, 2014 at 10:20 PM, Kanagaraj <kmayi...@redhat.com> >>> >>> > > wrote: >>> >>> > > >>> >>> > >> From vdsm.log "error: Connection failed. Please check if >>> >>> > >> gluster >>> >>> > >> daemon >>> >>> > >> is operational." >>> >>> > >> >>> >>> > >> Starting glusterd service should fix this issue. 'service >>> >>> > >> glusterd >>> >>> > >> start' >>> >>> > >> But i am wondering why the glusterd was not started >>> >>> > >> automatically >>> >>> > >> after >>> >>> > >> the reboot. >>> >>> > >> >>> >>> > >> Thanks, >>> >>> > >> Kanagaraj >>> >>> > >> >>> >>> > >> >>> >>> > >> >>> >>> > >> On 11/24/2014 07:18 PM, Punit Dambiwal wrote: >>> >>> > >> >>> >>> > >> Hi Kanagaraj, >>> >>> > >> >>> >>> > >> Please find the attached VDSM logs :- >>> >>> > >> >>> >>> > >> ---------------- >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> >>> >>> > >> >>> >>> > >> 21:41:17,182::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) >>> >>> > >> Owner.cancelAll requests {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:17,182::task::993::Storage.TaskManager.Task::(_decref) >>> >>> > >> Task=`1691d409-9b27-4585-8281-5ec26154367a`::ref 0 aborting >>> >>> > >> False >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> >>> >>> > >> 21:41:32,393::task::595::Storage.TaskManager.Task::(_updateState) >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state >>> >>> > >> init >>> >>> > >> -> >>> >>> > >> state preparing >>> >>> > >> Thread-13::INFO::2014-11-24 >>> >>> > >> 21:41:32,393::logUtils::44::dispatcher::(wrapper) Run and >>> >>> > >> protect: >>> >>> > >> repoStats(options=None) >>> >>> > >> Thread-13::INFO::2014-11-24 >>> >>> > >> 21:41:32,393::logUtils::47::dispatcher::(wrapper) Run and >>> >>> > >> protect: >>> >>> > >> repoStats, Return response: {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:32,393::task::1191::Storage.TaskManager.Task::(prepare) >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::finished: {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> >>> >>> > >> 21:41:32,394::task::595::Storage.TaskManager.Task::(_updateState) >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::moving from state >>> >>> > >> preparing >>> >>> > >> -> >>> >>> > >> state finished >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> >>> >>> > >> >>> >>> > >> 21:41:32,394::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) >>> >>> > >> Owner.releaseAll requests {} resources {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> >>> >>> > >> >>> >>> > >> 21:41:32,394::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) >>> >>> > >> Owner.cancelAll requests {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:32,394::task::993::Storage.TaskManager.Task::(_decref) >>> >>> > >> Task=`994c7bc3-a236-4d03-a732-e068c7ed9ed4`::ref 0 aborting >>> >>> > >> False >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,550::BindingXMLRPC::1132::vds::(wrapper) client >>> >>> > >> [10.10.10.2]::call >>> >>> > >> getCapabilities with () {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,553::utils::738::root::(execCmd) >>> >>> > >> /sbin/ip route show to 0.0.0.0/0 table all (cwd None) >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,560::utils::758::root::(execCmd) >>> >>> > >> SUCCESS: <err> = ''; <rc> = 0 >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,588::caps::728::root::(_getKeyPackages) rpm package >>> >>> > >> ('gluster-swift',) not found >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,592::caps::728::root::(_getKeyPackages) rpm package >>> >>> > >> ('gluster-swift-object',) not found >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,593::caps::728::root::(_getKeyPackages) rpm package >>> >>> > >> ('gluster-swift-plugin',) not found >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package >>> >>> > >> ('gluster-swift-account',) not found >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package >>> >>> > >> ('gluster-swift-proxy',) not found >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,598::caps::728::root::(_getKeyPackages) rpm package >>> >>> > >> ('gluster-swift-doc',) not found >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package >>> >>> > >> ('gluster-swift-container',) not found >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,599::caps::728::root::(_getKeyPackages) rpm package >>> >>> > >> ('glusterfs-geo-replication',) not found >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,600::caps::646::root::(get) >>> >>> > >> VirtioRNG DISABLED: libvirt version 0.10.2-29.el6_5.9 required >>> >>> > >> >= >>> >>> > >> 0.10.2-31 >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,603::BindingXMLRPC::1139::vds::(wrapper) return >>> >>> > >> getCapabilities >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info': >>> >>> > >> {'HBAInventory': >>> >>> > >> {'iSCSI': [{'InitiatorName': >>> >>> > >> 'iqn.1994-05.com.redhat:32151ce183c8'}], >>> >>> > >> 'FC': >>> >>> > >> []}, 'packages2': {'kernel': {'release': '431.el6.x86_64', >>> >>> > >> 'buildtime': >>> >>> > >> 1385061309.0, 'version': '2.6.32'}, 'glusterfs-rdma': >>> >>> > >> {'release': >>> >>> > >> '1.el6', >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'glusterfs-fuse': >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version': >>> >>> > >> '3.5.1'}, >>> >>> > >> 'spice-server': {'release': '6.el6_5.2', 'buildtime': >>> >>> > >> 1402324637L, >>> >>> > >> 'version': '0.12.4'}, 'vdsm': {'release': '1.gitdb83943.el6', >>> >>> > >> 'buildtime': >>> >>> > >> 1412784567L, 'version': '4.16.7'}, 'qemu-kvm': {'release': >>> >>> > >> '2.415.el6_5.10', 'buildtime': 1402435700L, 'version': >>> >>> > >> '0.12.1.2'}, >>> >>> > >> 'qemu-img': {'release': '2.415.el6_5.10', 'buildtime': >>> >>> > >> 1402435700L, >>> >>> > >> 'version': '0.12.1.2'}, 'libvirt': {'release': '29.el6_5.9', >>> >>> > >> 'buildtime': >>> >>> > >> 1402404612L, 'version': '0.10.2'}, 'glusterfs': {'release': >>> >>> > >> '1.el6', >>> >>> > >> 'buildtime': 1403622628L, 'version': '3.5.1'}, 'mom': >>> >>> > >> {'release': >>> >>> > >> '2.el6', >>> >>> > >> 'buildtime': 1403794344L, 'version': '0.4.1'}, >>> >>> > >> 'glusterfs-server': >>> >>> > >> {'release': '1.el6', 'buildtime': 1403622628L, 'version': >>> >>> > >> '3.5.1'}}, >>> >>> > >> 'numaNodeDistance': {'1': [20, 10], '0': [10, 20]}, 'cpuModel': >>> >>> > >> 'Intel(R) >>> >>> > >> Xeon(R) CPU X5650 @ 2.67GHz', 'liveMerge': 'false', >>> >>> > >> 'hooks': >>> >>> > >> {}, >>> >>> > >> 'cpuSockets': '2', 'vmTypes': ['kvm'], 'selinux': {'mode': '1'}, >>> >>> > >> 'kdumpStatus': 0, 'supportedProtocols': ['2.2', '2.3'], >>> >>> > >> 'networks': >>> >>> > >> {'ovirtmgmt': {'iface': u'bond0.10', 'addr': '43.252.176.16', >>> >>> > >> 'bridged': >>> >>> > >> False, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': >>> >>> > >> '1500', >>> >>> > >> 'bootproto4': 'none', 'netmask': '255.255.255.0', 'ipv4addrs': >>> >>> > >> [' >>> >>> > >> 43.252.176.16/24' <http://43.252.176.16/24%27>], 'interface': >>> >>> > >> u'bond0.10', 'ipv6gateway': '::', 'gateway': '43.25.17.1'}, >>> >>> > >> 'Internal': >>> >>> > >> {'iface': 'Internal', 'addr': '', 'cfg': {'DEFROUTE': 'no', >>> >>> > >> 'HOTPLUG': >>> >>> > >> 'no', 'MTU': '9000', 'DELAY': '0', 'NM_CONTROLLED': 'no', >>> >>> > >> 'BOOTPROTO': >>> >>> > >> 'none', 'STP': 'off', 'DEVICE': 'Internal', 'TYPE': 'Bridge', >>> >>> > >> 'ONBOOT': >>> >>> > >> 'no'}, 'bridged': True, 'ipv6addrs': >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], >>> >>> > >> 'gateway': '', 'bootproto4': 'none', 'netmask': '', 'stp': >>> >>> > >> 'off', >>> >>> > >> 'ipv4addrs': [], 'mtu': '9000', 'ipv6gateway': '::', 'ports': >>> >>> > >> ['bond1.100']}, 'storage': {'iface': u'bond1', 'addr': >>> >>> > >> '10.10.10.6', >>> >>> > >> 'bridged': False, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], >>> >>> > >> 'mtu': >>> >>> > >> '9000', 'bootproto4': 'none', 'netmask': '255.255.255.0', >>> >>> > >> 'ipv4addrs': [' >>> >>> > >> 10.10.10.6/24' <http://10.10.10.6/24%27>], 'interface': >>> >>> > >> u'bond1', >>> >>> > >> 'ipv6gateway': '::', 'gateway': ''}, 'VMNetwork': {'iface': >>> >>> > >> 'VMNetwork', >>> >>> > >> 'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU': >>> >>> > >> '1500', >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', 'STP': >>> >>> > >> 'off', >>> >>> > >> 'DEVICE': 'VMNetwork', 'TYPE': 'Bridge', 'ONBOOT': 'no'}, >>> >>> > >> 'bridged': >>> >>> > >> True, >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'gateway': '', >>> >>> > >> 'bootproto4': >>> >>> > >> 'none', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], 'mtu': >>> >>> > >> '1500', >>> >>> > >> 'ipv6gateway': '::', 'ports': ['bond0.36']}}, 'bridges': >>> >>> > >> {'Internal': >>> >>> > >> {'addr': '', 'cfg': {'DEFROUTE': 'no', 'HOTPLUG': 'no', 'MTU': >>> >>> > >> '9000', >>> >>> > >> 'DELAY': '0', 'NM_CONTROLLED': 'no', 'BOOTPROTO': 'none', 'STP': >>> >>> > >> 'off', >>> >>> > >> 'DEVICE': 'Internal', 'TYPE': 'Bridge', 'ONBOOT': 'no'}, >>> >>> > >> 'ipv6addrs': >>> >>> > >> ['fe80::210:18ff:fecd:daac/64'], 'mtu': '9000', 'netmask': '', >>> >>> > >> 'stp': >>> >>> > >> 'off', 'ipv4addrs': [], 'ipv6gateway': '::', 'gateway': '', >>> >>> > >> 'opts': >>> >>> > >> {'topology_change_detected': '0', 'multicast_last_member_count': >>> >>> > >> '2', >>> >>> > >> 'hash_elasticity': '4', 'multicast_query_response_interval': >>> >>> > >> '999', >>> >>> > >> 'multicast_snooping': '1', 'multicast_startup_query_interval': >>> >>> > >> '3124', >>> >>> > >> 'hello_timer': '31', 'multicast_querier_interval': '25496', >>> >>> > >> 'max_age': >>> >>> > >> '1999', 'hash_max': '512', 'stp_state': '0', 'root_id': >>> >>> > >> '8000.001018cddaac', 'priority': '32768', >>> >>> > >> 'multicast_membership_interval': >>> >>> > >> '25996', 'root_path_cost': '0', 'root_port': '0', >>> >>> > >> 'multicast_querier': >>> >>> > >> '0', >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199', >>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.001018cddaac', >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', >>> >>> > >> 'gc_timer': >>> >>> > >> '31', >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0', >>> >>> > >> 'multicast_query_interval': '12498', >>> >>> > >> 'multicast_last_member_interval': >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports': >>> >>> > >> ['bond1.100']}, 'VMNetwork': {'addr': '', 'cfg': {'DEFROUTE': >>> >>> > >> 'no', >>> >>> > >> 'HOTPLUG': 'no', 'MTU': '1500', 'DELAY': '0', 'NM_CONTROLLED': >>> >>> > >> 'no', >>> >>> > >> 'BOOTPROTO': 'none', 'STP': 'off', 'DEVICE': 'VMNetwork', >>> >>> > >> 'TYPE': >>> >>> > >> 'Bridge', >>> >>> > >> 'ONBOOT': 'no'}, 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], >>> >>> > >> 'mtu': >>> >>> > >> '1500', 'netmask': '', 'stp': 'off', 'ipv4addrs': [], >>> >>> > >> 'ipv6gateway': >>> >>> > >> '::', >>> >>> > >> 'gateway': '', 'opts': {'topology_change_detected': '0', >>> >>> > >> 'multicast_last_member_count': '2', 'hash_elasticity': '4', >>> >>> > >> 'multicast_query_response_interval': '999', >>> >>> > >> 'multicast_snooping': >>> >>> > >> '1', >>> >>> > >> 'multicast_startup_query_interval': '3124', 'hello_timer': >>> >>> > >> '131', >>> >>> > >> 'multicast_querier_interval': '25496', 'max_age': '1999', >>> >>> > >> 'hash_max': >>> >>> > >> '512', 'stp_state': '0', 'root_id': '8000.60eb6920b46c', >>> >>> > >> 'priority': >>> >>> > >> '32768', 'multicast_membership_interval': '25996', >>> >>> > >> 'root_path_cost': >>> >>> > >> '0', >>> >>> > >> 'root_port': '0', 'multicast_querier': '0', >>> >>> > >> 'multicast_startup_query_count': '2', 'hello_time': '199', >>> >>> > >> 'topology_change': '0', 'bridge_id': '8000.60eb6920b46c', >>> >>> > >> 'topology_change_timer': '0', 'ageing_time': '29995', >>> >>> > >> 'gc_timer': >>> >>> > >> '31', >>> >>> > >> 'group_addr': '1:80:c2:0:0:0', 'tcn_timer': '0', >>> >>> > >> 'multicast_query_interval': '12498', >>> >>> > >> 'multicast_last_member_interval': >>> >>> > >> '99', 'multicast_router': '1', 'forward_delay': '0'}, 'ports': >>> >>> > >> ['bond0.36']}}, 'uuid': '44454C4C-4C00-1057-8053-B7C04F504E31', >>> >>> > >> 'lastClientIface': 'bond1', 'nics': {'eth3': {'permhwaddr': >>> >>> > >> '00:10:18:cd:da:ae', 'addr': '', 'cfg': {'SLAVE': 'yes', >>> >>> > >> 'NM_CONTROLLED': >>> >>> > >> 'no', 'MTU': '9000', 'HWADDR': '00:10:18:cd:da:ae', 'MASTER': >>> >>> > >> 'bond1', >>> >>> > >> 'DEVICE': 'eth3', 'ONBOOT': 'no'}, 'ipv6addrs': [], 'mtu': >>> >>> > >> '9000', >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '00:10:18:cd:da:ac', >>> >>> > >> 'speed': >>> >>> > >> 1000}, 'eth2': {'permhwaddr': '00:10:18:cd:da:ac', 'addr': '', >>> >>> > >> 'cfg': >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '9000', 'HWADDR': >>> >>> > >> '00:10:18:cd:da:ac', 'MASTER': 'bond1', 'DEVICE': 'eth2', >>> >>> > >> 'ONBOOT': >>> >>> > >> 'no'}, >>> >>> > >> 'ipv6addrs': [], 'mtu': '9000', 'netmask': '', 'ipv4addrs': [], >>> >>> > >> 'hwaddr': >>> >>> > >> '00:10:18:cd:da:ac', 'speed': 1000}, 'eth1': {'permhwaddr': >>> >>> > >> '60:eb:69:20:b4:6d', 'addr': '', 'cfg': {'SLAVE': 'yes', >>> >>> > >> 'NM_CONTROLLED': >>> >>> > >> 'no', 'MTU': '1500', 'HWADDR': '60:eb:69:20:b4:6d', 'MASTER': >>> >>> > >> 'bond0', >>> >>> > >> 'DEVICE': 'eth1', 'ONBOOT': 'yes'}, 'ipv6addrs': [], 'mtu': >>> >>> > >> '1500', >>> >>> > >> 'netmask': '', 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', >>> >>> > >> 'speed': >>> >>> > >> 1000}, 'eth0': {'permhwaddr': '60:eb:69:20:b4:6c', 'addr': '', >>> >>> > >> 'cfg': >>> >>> > >> {'SLAVE': 'yes', 'NM_CONTROLLED': 'no', 'MTU': '1500', 'HWADDR': >>> >>> > >> '60:eb:69:20:b4:6c', 'MASTER': 'bond0', 'DEVICE': 'eth0', >>> >>> > >> 'ONBOOT': >>> >>> > >> 'yes'}, >>> >>> > >> 'ipv6addrs': [], 'mtu': '1500', 'netmask': '', 'ipv4addrs': [], >>> >>> > >> 'hwaddr': >>> >>> > >> '60:eb:69:20:b4:6c', 'speed': 1000}}, 'software_revision': '1', >>> >>> > >> 'clusterLevels': ['3.0', '3.1', '3.2', '3.3', '3.4', '3.5'], >>> >>> > >> 'cpuFlags': >>> >>> > >> >>> >>> > >> >>> >>> > >> u'fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,xtopology,nonstop_tsc,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,popcnt,aes,lahf_lm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_Nehalem,model_Conroe,model_coreduo,model_core2duo,model_Penryn,model_Westmere,model_n270', >>> >>> > >> 'ISCSIInitiatorName': 'iqn.1994-05.com.redhat:32151ce183c8', >>> >>> > >> 'netConfigDirty': 'False', 'supportedENGINEs': ['3.0', '3.1', >>> >>> > >> '3.2', >>> >>> > >> '3.3', >>> >>> > >> '3.4', '3.5'], 'autoNumaBalancing': 2, 'reservedMem': '321', >>> >>> > >> 'bondings': >>> >>> > >> {'bond4': {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', >>> >>> > >> 'slaves': >>> >>> > >> [], 'hwaddr': '00:00:00:00:00:00'}, 'bond0': {'addr': '', 'cfg': >>> >>> > >> {'HOTPLUG': 'no', 'MTU': '1500', 'NM_CONTROLLED': 'no', >>> >>> > >> 'BONDING_OPTS': >>> >>> > >> 'mode=4 miimon=100', 'DEVICE': 'bond0', 'ONBOOT': 'yes'}, >>> >>> > >> 'ipv6addrs': >>> >>> > >> ['fe80::62eb:69ff:fe20:b46c/64'], 'mtu': '1500', 'netmask': '', >>> >>> > >> 'ipv4addrs': [], 'hwaddr': '60:eb:69:20:b4:6c', 'slaves': >>> >>> > >> ['eth0', >>> >>> > >> 'eth1'], >>> >>> > >> 'opts': {'miimon': '100', 'mode': '4'}}, 'bond1': {'addr': >>> >>> > >> '10.10.10.6', >>> >>> > >> 'cfg': {'DEFROUTE': 'no', 'IPADDR': '10.10.10.6', 'HOTPLUG': >>> >>> > >> 'no', >>> >>> > >> 'MTU': >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0', >>> >>> > >> 'BOOTPROTO': >>> >>> > >> 'none', 'BONDING_OPTS': 'mode=4 miimon=100', 'DEVICE': 'bond1', >>> >>> > >> 'ONBOOT': >>> >>> > >> 'no'}, 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'mtu': >>> >>> > >> '9000', >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['10.10.10.6/24' >>> >>> > >> <http://10.10.10.6/24%27>], 'hwaddr': '00:10:18:cd:da:ac', >>> >>> > >> 'slaves': >>> >>> > >> ['eth2', 'eth3'], 'opts': {'miimon': '100', 'mode': '4'}}, >>> >>> > >> 'bond2': >>> >>> > >> {'addr': '', 'cfg': {}, 'mtu': '1500', 'netmask': '', 'slaves': >>> >>> > >> [], >>> >>> > >> 'hwaddr': '00:00:00:00:00:00'}, 'bond3': {'addr': '', 'cfg': {}, >>> >>> > >> 'mtu': >>> >>> > >> '1500', 'netmask': '', 'slaves': [], 'hwaddr': >>> >>> > >> '00:00:00:00:00:00'}}, >>> >>> > >> 'software_version': '4.16', 'memSize': '24019', 'cpuSpeed': >>> >>> > >> '2667.000', >>> >>> > >> 'numaNodes': {u'1': {'totalMemory': '12288', 'cpus': [6, 7, 8, >>> >>> > >> 9, >>> >>> > >> 10, 11, >>> >>> > >> 18, 19, 20, 21, 22, 23]}, u'0': {'totalMemory': '12278', 'cpus': >>> >>> > >> [0, >>> >>> > >> 1, 2, >>> >>> > >> 3, 4, 5, 12, 13, 14, 15, 16, 17]}}, 'version_name': 'Snow Man', >>> >>> > >> 'vlans': >>> >>> > >> {'bond0.10': {'iface': 'bond0', 'addr': '43.25.17.16', 'cfg': >>> >>> > >> {'DEFROUTE': >>> >>> > >> 'yes', 'VLAN': 'yes', 'IPADDR': '43.25.17.16', 'HOTPLUG': 'no', >>> >>> > >> 'GATEWAY': >>> >>> > >> '43.25.17.1', 'NM_CONTROLLED': 'no', 'NETMASK': '255.255.255.0', >>> >>> > >> 'BOOTPROTO': 'none', 'DEVICE': 'bond0.10', 'MTU': '1500', >>> >>> > >> 'ONBOOT': >>> >>> > >> 'yes'}, >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 10, >>> >>> > >> 'mtu': >>> >>> > >> '1500', >>> >>> > >> 'netmask': '255.255.255.0', 'ipv4addrs': ['43.25.17.16/24'] >>> >>> > >> <http://43.25.17.16/24%27%5D>}, 'bond0.36': {'iface': 'bond0', >>> >>> > >> 'addr': >>> >>> > >> '', 'cfg': {'BRIDGE': 'VMNetwork', 'VLAN': 'yes', 'HOTPLUG': >>> >>> > >> 'no', >>> >>> > >> 'MTU': >>> >>> > >> '1500', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond0.36', 'ONBOOT': >>> >>> > >> 'no'}, >>> >>> > >> 'ipv6addrs': ['fe80::62eb:69ff:fe20:b46c/64'], 'vlanid': 36, >>> >>> > >> 'mtu': >>> >>> > >> '1500', >>> >>> > >> 'netmask': '', 'ipv4addrs': []}, 'bond1.100': {'iface': 'bond1', >>> >>> > >> 'addr': >>> >>> > >> '', 'cfg': {'BRIDGE': 'Internal', 'VLAN': 'yes', 'HOTPLUG': >>> >>> > >> 'no', >>> >>> > >> 'MTU': >>> >>> > >> '9000', 'NM_CONTROLLED': 'no', 'DEVICE': 'bond1.100', 'ONBOOT': >>> >>> > >> 'no'}, >>> >>> > >> 'ipv6addrs': ['fe80::210:18ff:fecd:daac/64'], 'vlanid': 100, >>> >>> > >> 'mtu': >>> >>> > >> '9000', >>> >>> > >> 'netmask': '', 'ipv4addrs': []}}, 'cpuCores': '12', >>> >>> > >> 'kvmEnabled': >>> >>> > >> 'true', >>> >>> > >> 'guestOverhead': '65', 'cpuThreads': '24', 'emulatedMachines': >>> >>> > >> [u'rhel6.5.0', u'pc', u'rhel6.4.0', u'rhel6.3.0', u'rhel6.2.0', >>> >>> > >> u'rhel6.1.0', u'rhel6.0.0', u'rhel5.5.0', u'rhel5.4.4', >>> >>> > >> u'rhel5.4.0'], >>> >>> > >> 'operatingSystem': {'release': '5.el6.centos.11.1', 'version': >>> >>> > >> '6', >>> >>> > >> 'name': >>> >>> > >> 'RHEL'}, 'lastClient': '10.10.10.2'}} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,620::BindingXMLRPC::1132::vds::(wrapper) client >>> >>> > >> [10.10.10.2]::call >>> >>> > >> getHardwareInfo with () {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,621::BindingXMLRPC::1139::vds::(wrapper) return >>> >>> > >> getHardwareInfo >>> >>> > >> with {'status': {'message': 'Done', 'code': 0}, 'info': >>> >>> > >> {'systemProductName': 'CS24-TY', 'systemSerialNumber': >>> >>> > >> '7LWSPN1', >>> >>> > >> 'systemFamily': 'Server', 'systemVersion': 'A00', 'systemUUID': >>> >>> > >> '44454c4c-4c00-1057-8053-b7c04f504e31', 'systemManufacturer': >>> >>> > >> 'Dell'}} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:41,733::BindingXMLRPC::1132::vds::(wrapper) client >>> >>> > >> [10.10.10.2]::call >>> >>> > >> hostsList with () {} flowID [222e8036] >>> >>> > >> Thread-13::ERROR::2014-11-24 >>> >>> > >> 21:41:44,753::BindingXMLRPC::1148::vds::(wrapper) vdsm exception >>> >>> > >> occured >>> >>> > >> Traceback (most recent call last): >>> >>> > >> File "/usr/share/vdsm/rpc/BindingXMLRPC.py", line 1135, in >>> >>> > >> wrapper >>> >>> > >> res = f(*args, **kwargs) >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 54, in wrapper >>> >>> > >> rv = func(*args, **kwargs) >>> >>> > >> File "/usr/share/vdsm/gluster/api.py", line 251, in hostsList >>> >>> > >> return {'hosts': self.svdsmProxy.glusterPeerStatus()} >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 50, in __call__ >>> >>> > >> return callMethod() >>> >>> > >> File "/usr/share/vdsm/supervdsm.py", line 48, in <lambda> >>> >>> > >> **kwargs) >>> >>> > >> File "<string>", line 2, in glusterPeerStatus >>> >>> > >> File "/usr/lib64/python2.6/multiprocessing/managers.py", line >>> >>> > >> 740, >>> >>> > >> in >>> >>> > >> _callmethod >>> >>> > >> raise convert_to_error(kind, result) >>> >>> > >> GlusterCmdExecFailedException: Command execution failed >>> >>> > >> error: Connection failed. Please check if gluster daemon is >>> >>> > >> operational. >>> >>> > >> return code: 1 >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> >>> >>> > >> 21:41:50,949::task::595::Storage.TaskManager.Task::(_updateState) >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state >>> >>> > >> init >>> >>> > >> -> >>> >>> > >> state preparing >>> >>> > >> Thread-13::INFO::2014-11-24 >>> >>> > >> 21:41:50,950::logUtils::44::dispatcher::(wrapper) Run and >>> >>> > >> protect: >>> >>> > >> repoStats(options=None) >>> >>> > >> Thread-13::INFO::2014-11-24 >>> >>> > >> 21:41:50,950::logUtils::47::dispatcher::(wrapper) Run and >>> >>> > >> protect: >>> >>> > >> repoStats, Return response: {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:50,950::task::1191::Storage.TaskManager.Task::(prepare) >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::finished: {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> >>> >>> > >> 21:41:50,950::task::595::Storage.TaskManager.Task::(_updateState) >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::moving from state >>> >>> > >> preparing >>> >>> > >> -> >>> >>> > >> state finished >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> >>> >>> > >> >>> >>> > >> 21:41:50,951::resourceManager::940::Storage.ResourceManager.Owner::(releaseAll) >>> >>> > >> Owner.releaseAll requests {} resources {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> >>> >>> > >> >>> >>> > >> 21:41:50,951::resourceManager::977::Storage.ResourceManager.Owner::(cancelAll) >>> >>> > >> Owner.cancelAll requests {} >>> >>> > >> Thread-13::DEBUG::2014-11-24 >>> >>> > >> 21:41:50,951::task::993::Storage.TaskManager.Task::(_decref) >>> >>> > >> Task=`c9042986-c978-4b08-adb2-616f5299e115`::ref 0 aborting >>> >>> > >> False >>> >>> > >> ------------------------------- >>> >>> > >> >>> >>> > >> [root@compute4 ~]# service glusterd status >>> >>> > >> glusterd is stopped >>> >>> > >> [root@compute4 ~]# chkconfig --list | grep glusterd >>> >>> > >> glusterd 0:off 1:off 2:on 3:on 4:on 5:on >>> >>> > >> 6:off >>> >>> > >> [root@compute4 ~]# >>> >>> > >> >>> >>> > >> Thanks, >>> >>> > >> Punit >>> >>> > >> >>> >>> > >> On Mon, Nov 24, 2014 at 6:36 PM, Kanagaraj <kmayi...@redhat.com> >>> >>> > >> wrote: >>> >>> > >> >>> >>> > >>> Can you send the corresponding error in vdsm.log from the >>> >>> > >>> host? >>> >>> > >>> >>> >>> > >>> Also check if glusterd service is running. >>> >>> > >>> >>> >>> > >>> Thanks, >>> >>> > >>> Kanagaraj >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> On 11/24/2014 03:39 PM, Punit Dambiwal wrote: >>> >>> > >>> >>> >>> > >>> Hi, >>> >>> > >>> >>> >>> > >>> After reboot my Hypervisior host can not activate again in the >>> >>> > >>> cluster >>> >>> > >>> and failed with the following error :- >>> >>> > >>> >>> >>> > >>> Gluster command [<UNKNOWN>] failed on server... >>> >>> > >>> >>> >>> > >>> Engine logs :- >>> >>> > >>> >>> >>> > >>> 2014-11-24 18:05:28,397 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) START, >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId = >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 5f251c90 >>> >>> > >>> 2014-11-24 18:05:30,609 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-64) FINISH, >>> >>> > >>> GlusterVolumesListVDSCommand, >>> >>> > >>> return: >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@d95203e0}, >>> >>> > >>> log id: 5f251c90 >>> >>> > >>> 2014-11-24 18:05:33,768 INFO >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >>> >>> > >>> (ajp--127.0.0.1-8702-8) >>> >>> > >>> [287d570d] Lock Acquired to object EngineLock [exclusiveLocks= >>> >>> > >>> key: >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a value: VDS >>> >>> > >>> , sharedLocks= ] >>> >>> > >>> 2014-11-24 18:05:33,795 INFO >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Running command: >>> >>> > >>> ActivateVdsCommand internal: false. Entities affected : ID: >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDSAction group >>> >>> > >>> MANIPULATE_HOST >>> >>> > >>> with role type ADMIN >>> >>> > >>> 2014-11-24 18:05:33,796 INFO >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Before acquiring >>> >>> > >>> lock in >>> >>> > >>> order to prevent monitoring for host Compute5 from data-center >>> >>> > >>> SV_WTC >>> >>> > >>> 2014-11-24 18:05:33,797 INFO >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] Lock acquired, >>> >>> > >>> from >>> >>> > >>> now a >>> >>> > >>> monitoring of host will be skipped for host Compute5 from >>> >>> > >>> data-center >>> >>> > >>> SV_WTC >>> >>> > >>> 2014-11-24 18:05:33,817 INFO >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] START, >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId = >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=Unassigned, >>> >>> > >>> nonOperationalReason=NONE, stopSpmFailureLogged=false), log id: >>> >>> > >>> 1cbc7311 >>> >>> > >>> 2014-11-24 18:05:33,820 INFO >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) [287d570d] FINISH, >>> >>> > >>> SetVdsStatusVDSCommand, log id: 1cbc7311 >>> >>> > >>> 2014-11-24 18:05:34,086 INFO >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Activate finished. Lock >>> >>> > >>> released. >>> >>> > >>> Monitoring can run now for host Compute5 from data-center >>> >>> > >>> SV_WTC >>> >>> > >>> 2014-11-24 18:05:34,088 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Correlation ID: 287d570d, >>> >>> > >>> Job >>> >>> > >>> ID: >>> >>> > >>> 5ef8e4d6-b2bc-469e-8e81-7ef74b2a001a, Call Stack: null, Custom >>> >>> > >>> Event ID: >>> >>> > >>> -1, Message: Host Compute5 was activated by admin. >>> >>> > >>> 2014-11-24 18:05:34,090 INFO >>> >>> > >>> [org.ovirt.engine.core.bll.ActivateVdsCommand] >>> >>> > >>> (org.ovirt.thread.pool-8-thread-45) Lock freed to object >>> >>> > >>> EngineLock >>> >>> > >>> [exclusiveLocks= key: 0bf6b00f-7947-4411-b55a-cc5eea2b381a >>> >>> > >>> value: >>> >>> > >>> VDS >>> >>> > >>> , sharedLocks= ] >>> >>> > >>> 2014-11-24 18:05:35,792 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] START, >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId = >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 48a0c832 >>> >>> > >>> 2014-11-24 18:05:37,064 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) START, >>> >>> > >>> GetHardwareInfoVDSCommand(HostName = Compute5, HostId = >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, >>> >>> > >>> vds=Host[Compute5,0bf6b00f-7947-4411-b55a-cc5eea2b381a]), log >>> >>> > >>> id: >>> >>> > >>> 6d560cc2 >>> >>> > >>> 2014-11-24 18:05:37,074 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.vdsbroker.GetHardwareInfoVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) FINISH, >>> >>> > >>> GetHardwareInfoVDSCommand, log >>> >>> > >>> id: 6d560cc2 >>> >>> > >>> 2014-11-24 18:05:37,093 WARN >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsManager] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) Host Compute5 is running >>> >>> > >>> with >>> >>> > >>> disabled >>> >>> > >>> SELinux. >>> >>> > >>> 2014-11-24 18:05:37,127 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsCpuFlagsOrClusterChangedCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] Running command: >>> >>> > >>> HandleVdsCpuFlagsOrClusterChangedCommand internal: true. >>> >>> > >>> Entities >>> >>> > >>> affected >>> >>> > >>> : ID: 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS >>> >>> > >>> 2014-11-24 18:05:37,147 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] START, >>> >>> > >>> GlusterServersListVDSCommand(HostName = Compute5, HostId = >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a), log id: 4faed87 >>> >>> > >>> 2014-11-24 18:05:37,164 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterServersListVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [2b4a51cf] FINISH, >>> >>> > >>> GlusterServersListVDSCommand, log id: 4faed87 >>> >>> > >>> 2014-11-24 18:05:37,189 INFO >>> >>> > >>> [org.ovirt.engine.core.bll.SetNonOperationalVdsCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Running command: >>> >>> > >>> SetNonOperationalVdsCommand internal: true. Entities affected : >>> >>> > >>> ID: >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS >>> >>> > >>> 2014-11-24 18:05:37,206 INFO >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] START, >>> >>> > >>> SetVdsStatusVDSCommand(HostName = Compute5, HostId = >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a, status=NonOperational, >>> >>> > >>> nonOperationalReason=GLUSTER_COMMAND_FAILED, >>> >>> > >>> stopSpmFailureLogged=false), >>> >>> > >>> log id: fed5617 >>> >>> > >>> 2014-11-24 18:05:37,209 INFO >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.SetVdsStatusVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] FINISH, >>> >>> > >>> SetVdsStatusVDSCommand, log id: fed5617 >>> >>> > >>> 2014-11-24 18:05:37,223 ERROR >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID: >>> >>> > >>> 4a84c4e5, >>> >>> > >>> Job >>> >>> > >>> ID: 4bfd4a6d-c3ef-468f-a40e-a3a6ca13011b, Call Stack: null, >>> >>> > >>> Custom >>> >>> > >>> Event >>> >>> > >>> ID: -1, Message: Gluster command [<UNKNOWN>] failed on server >>> >>> > >>> Compute5. >>> >>> > >>> 2014-11-24 18:05:37,243 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [4a84c4e5] Correlation ID: >>> >>> > >>> null, >>> >>> > >>> Call >>> >>> > >>> Stack: null, Custom Event ID: -1, Message: Status of host >>> >>> > >>> Compute5 >>> >>> > >>> was >>> >>> > >>> set >>> >>> > >>> to NonOperational. >>> >>> > >>> 2014-11-24 18:05:37,272 INFO >>> >>> > >>> [org.ovirt.engine.core.bll.HandleVdsVersionCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Running command: >>> >>> > >>> HandleVdsVersionCommand internal: true. Entities affected : >>> >>> > >>> ID: >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a Type: VDS >>> >>> > >>> 2014-11-24 18:05:37,274 INFO >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.VdsUpdateRunTimeInfo] >>> >>> > >>> (DefaultQuartzScheduler_Worker-69) [a0c8a7f] Host >>> >>> > >>> 0bf6b00f-7947-4411-b55a-cc5eea2b381a : Compute5 is already in >>> >>> > >>> NonOperational status for reason GLUSTER_COMMAND_FAILED. >>> >>> > >>> SetNonOperationalVds command is skipped. >>> >>> > >>> 2014-11-24 18:05:38,065 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-55) [3706e836] FINISH, >>> >>> > >>> GlusterVolumesListVDSCommand, return: >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> {26ae1672-ee09-4a38-8fd2-72dd9974cc2b=org.ovirt.engine.core.common.businessentities.gluster.GlusterVolumeEntity@4e72a1b1}, >>> >>> > >>> log id: 48a0c832 >>> >>> > >>> 2014-11-24 18:05:43,243 INFO >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> [org.ovirt.engine.core.vdsbroker.gluster.GlusterVolumesListVDSCommand] >>> >>> > >>> (DefaultQuartzScheduler_Worker-35) START, >>> >>> > >>> GlusterVolumesListVDSCommand(HostName = Compute4, HostId = >>> >>> > >>> 33648a90-200c-45ca-89d5-1ce305d79a6a), log id: 3ce13ebc >>> >>> > >>> ^C >>> >>> > >>> [root@ccr01 ~]# >>> >>> > >>> >>> >>> > >>> Thanks, >>> >>> > >>> Punit >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> _______________________________________________ >>> >>> > >>> Users mailing >>> >>> > >>> >>> >>> > >>> listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users >>> >>> > >>> >>> >>> > >>> >>> >>> > >>> >>> >>> > >> >>> >>> > >> >>> >>> > > >>> >>> > > >>> >>> > >>> >> >>> >> >>> > >>> > >>> > _______________________________________________ >>> > Gluster-users mailing list >>> > gluster-us...@gluster.org >>> > http://supercolony.gluster.org/mailman/listinfo/gluster-users >> >> > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users