Yes I made this : engine-config -s "UserDefinedVMProperties=hostusb=0x0572:0x1321" and nothing appear on the Edit VM, only : - sndbuf - vhost - sap_agent - viodiskattach
Is there any possibility to verify ? The first command I put engine-config -s "UserDefinedVMProperties=hostusb=true;another_property=regexp" following the doc, maybe this option is blocking the hook ? Alain Alain VONDRA Chargé d'exploitation des Systèmes d'Information Direction Administrative et Financière +33 1 44 39 77 76 UNICEF France 3 rue Duguay Trouin 75006 PARIS www.unicef.fr -----Message d'origine----- De : Itamar Heim [mailto:ih...@redhat.com] Envoyé : lundi 19 janvier 2015 11:29 À : VONDRA Alain; users@ovirt.org Objet : Re: [ovirt-users] USB Modem in a VM On 01/19/2015 12:23 PM, VONDRA Alain wrote: > Hi, > I've tried to use hook hostusb, I've installed vdsm-hook-hostusb.noarch > 0:4.16.10-0.el6, and followed the documentation on > http://www.ovirt.org/Vdsm_Hooks, but the new hook doesn't appear on the UI > using "Edit VM" and "custom properties". > Is there any other way to install hooks, the documentation is not so clear, > and I'm not very fine with python. > Thanks you don't need to know python. did you run the engine side commands (engine-config -s UserDefinedVMProperties... and restarted the engine)? check http://blog.conoracallahan.com/blog/2014/07/19/ovirt-usb-passthrough/ > Alain > > > > > Alain VONDRA > Chargé d'exploitation des Systèmes d'Information Direction > Administrative et Financière > +33 1 44 39 77 76 > UNICEF France > 3 rue Duguay Trouin 75006 PARIS > www.unicef.fr > > > > > -----Message d'origine----- > De : Itamar Heim [mailto:ih...@redhat.com] Envoyé : dimanche 18 > janvier 2015 11:42 À : VONDRA Alain Objet : Re: [ovirt-users] USB > Modem in a VM > > On 01/18/2015 12:36 PM, VONDRA Alain wrote: >> Hi, >> I didn't try yet this option http://www.ovirt.org/VDSM-Hooks/hostusb >> to inject it Do you think it will be a better solution ? > > that's the "right solution". > I'll reply again on list so folks can help you with it as needed. > >> Thanks >> Alain >> >> >> >> Alain VONDRA >> Chargé d'exploitation des Systèmes d'Information Direction >> Administrative et Financière >> +33 1 44 39 77 76 >> UNICEF France >> 3 rue Duguay Trouin 75006 PARIS >> www.unicef.fr >> >> >> >> >> ________________________________________ >> De : Itamar Heim [ih...@redhat.com] >> Envoyé : vendredi 16 janvier 2015 19:21 À : VONDRA Alain Objet : Re: >> [ovirt-users] USB Modem in a VM >> >> On 01/15/2015 05:56 PM, VONDRA Alain wrote: >>> Hi, >>> Thank you for your answer, I've tried to insert my USB modem, but it >>> doesn't up in the Windows VM. >>> I've tried to insert via virt-manager without success, I can't apply the >>> modification, however I see the modem using lsusb : >>> >>> lsusb >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 >>> Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: >>> ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: >>> ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: >>> ID 0624:0248 Avocent Corp. Virtual Hub Bus 001 Device 004: ID 0624:0249 >>> Avocent Corp. Virtual Keyboard/Mouse Bus 002 Device 010: ID 0572:1321 >>> Conexant Systems (Rockwell), Inc. >>> >>> I've unload the "cdc_acm" kernel module via rmmod without success. >>> I've also tried to edit the xml appending the ID and VENDDOR tags : >>> >>> <hostdev mode='subsystem' type='usb'> >>> <source> >>> <vendor id='0x0572'/> >>> <product id='0x1321'/> >>> </source> >>> </hostdev> >>> >>> Ut at the first load the config disappears... >>> Do I need to restart the host or restart libvirtd services ? >>> >>> Thanks for your help >>> Alain >>> >>> >>> >>> Alain VONDRA >>> Chargé d'exploitation des Systèmes d'Information Direction >>> Administrative et Financière >>> +33 1 44 39 77 76 >>> UNICEF France >>> 3 rue Duguay Trouin 75006 PARIS >>> www.unicef.fr >>> >>> >>> >>> >>> -----Message d'origine----- >>> De : Alon Bar-Lev [mailto:alo...@redhat.com] Envoyé : mardi 13 >>> janvier 2015 17:47 À : VONDRA Alain Cc : users@ovirt.org Objet : Re: >>> [ovirt-users] USB Modem in a VM >>> >>> >>> >>> ----- Original Message ----- >>>> From: "VONDRA Alain" <avon...@unicef.fr> >>>> To: users@ovirt.org >>>> Sent: Tuesday, January 13, 2015 5:55:01 PM >>>> Subject: [ovirt-users] USB Modem in a VM >>>> >>>> >>>> >>>> Hi, >>>> >>>> Can you tell me if I can use an USB modem through one of the >>>> hypervisor hosts to a Windows VM ? >>>> >>>> I’d like to install a Windows Fax Server. >>>> >>>> Thank you for your answers. >>> >>> >>> should be possible using qemu args: -usbdevice >>> host:vendor_id:product_id >>> >>> in libvirt replace @VENDOR@ and @DEVICE@ to device specific properties: >>> >>> <domain type='kvm'> >>> <name>...</name> >>> … >>> <devices> >>> … >>> <hostdev mode='subsystem' type='usb'> >>> <source> >>> <vendor id='0x@VENDOR@'/> >>> <product id='0x@DEVICE@'/> >>> </source> >>> </hostdev> >>> </devices> >>> </domain> >>> >>> if this option is not exposed in ui you can use vdsm-hooks[1] to modify the >>> libvirt configuration and inject such device. >>> >>> Regards, >>> Alon >>> >>> [1] http://www.ovirt.org/VDSM-Hooks >>> _______________________________________________ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >> >> have you used http://www.ovirt.org/VDSM-Hooks/hostusb to inject it? >> > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users