Hi Eli, Please use any details.
Thanks for your support. Regards Renchu Mathew -----Original Message----- From: Eli Mesika [mailto:emes...@redhat.com] Sent: Sunday, January 25, 2015 12:58 PM To: Renchu Mathew Cc: Martin Perina; users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi Renchu I am looking currently on he case and will respond later on today after investigating the logs. If I will not find anything, can I use the details for the host PM only for status command to try to debug and find the source of the problem ? Thanks Eli ----- Original Message ----- > From: "Renchu Mathew" <ren...@cracknell.com> > To: "Martin Perina" <mper...@redhat.com> > Cc: users@ovirt.org, "Eli Mesika" <emes...@redhat.com> > Sent: Sunday, January 25, 2015 6:50:00 AM > Subject: RE: [ovirt-users] Power Management config on Ovirt > > Hi Martin, > > I got the below output when I run the command and it works from both > the nodes. > > fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P > > Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I > lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis power status'... > Chassis power = On > Done > > Thanks > > Renchu Mathew | Sr. IT Administrator > > > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T > +971 4 > 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | > LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.com | WEB > www.cracknell.com > > This email, its content and any files transmitted with it are intended > solely for the addressee(s) and may be legally privileged and/or > confidential. If you are not the intended recipient please let us know > by email reply and delete it from the system. Please note that any > views or opinions presented in this email do not necessarily represent > those of the company. Email transmissions cannot be guaranteed to be > secure or error-free as information could be intercepted, corrupted, > lost, destroyed, arrive late or incomplete, or contain viruses. The > company therefore does not accept liability for any errors or > omissions in the contents of this message which arise as a result of email > transmission. > > > -----Original Message----- > From: Martin Perina [mailto:mper...@redhat.com] > Sent: Thursday, January 22, 2015 6:12 PM > To: Renchu Mathew > Cc: users@ovirt.org; Eli Mesika > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > > ----- Original Message ----- > > From: "Renchu Mathew" <ren...@cracknell.com> > > To: "Martin Perina" <mper...@redhat.com> > > Cc: users@ovirt.org > > Sent: Thursday, January 22, 2015 2:39:43 PM > > Subject: RE: [ovirt-users] Power Management config on Ovirt > > > > Hi Martin, > > > > > > > > Yes. The vdsm host.log is from node-02. > > That's strange, I cannot find any call to fenceNode which should > appear, if PM status is gathered. > > Eli, any idea? > > > I have checked the link and it says > > we need to install the sever view management agent & net-snmp on the hosts. > > Do we need to try this? How to install this on node? I used the > > below irmc admin user. > > Not, AFAIK this is needed only from Clustersuite, but not for oVirt. > > But could you please execute this command on node-20 just to confirm > that Fujitsu Primergy is communicating through IPMI: > > fence_ipmilan -a IP -l USER -p PASS -o status -v -P > > where IP is IPMI address (from the log it should be 192.168.1.114) > USER and PASS please set according to you setup. > > Thanks > > Martin > > > > > > > > > [cid:image001.png@01D03669.DD48B4E0] > > > > > > > > Regards > > > > > > > > Renchu Mathew | Sr. IT Administrator > > > > > > > > > > > > > > > > CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 > > 3445417 | F +971 4 3493675 | M +971 50 7386484 > > > > ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH > > > > EMAIL ren...@cracknell.com | WEB www.cracknell.com > > > > > > > > This email, its content and any files transmitted with it are > > intended solely for the addressee(s) and may be legally privileged > > and/or confidential. If you are not the intended recipient please > > let us know by email reply and delete it from the system. Please > > note that any views or opinions presented in this email do not > > necessarily represent those of the company. Email transmissions > > cannot be guaranteed to be secure or error-free as information could > > be intercepted, corrupted, lost, destroyed, arrive late or > > incomplete, or contain viruses. The company therefore does not > > accept liability for any errors or omissions in the contents of this > > message which arise as a result of email transmission. > > > > > > > > > > > > -----Original Message----- > > From: Martin Perina [mailto:mper...@redhat.com] > > Sent: Thursday, January 22, 2015 4:49 PM > > To: Renchu Mathew > > Cc: users@ovirt.org > > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > > > > > > Hi, > > > > > > > > according to [1] Fujitsu iRMC should be accessible using IPMI. > > > > Now, I looked at logs, but I cannot see any fenceNode exection in vdsm.log. > > According to engine.log, host Node-02.cracknell.com was used as > > fence proxy. > > Are you sure that vdsm.log is from this host? > > > > > > > > Thanks > > > > > > > > Martin > > > > > > > > [1] > > https://www.redhat.com/archives/linux-cluster/2010-January/msg00056. > > ht > > ml > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Renchu Mathew" <ren...@cracknell.com> > > > > > To: "Martin Perina" <mper...@redhat.com> > > > > > Cc: users@ovirt.org > > > > > Sent: Thursday, January 22, 2015 12:37:51 PM > > > > > Subject: RE: [ovirt-users] Power Management config on Ovirt > > > > > > > > > > Hi Martin, > > > > > > > > > > Please find attached log files from engine and proxy host. Not > > > sure > > > > > whether IPMI or which one can be used. It is Fujitsu iRMC port. I > > > also > > > > > tried the rsb but same error. > > > > > > > > > > Can we configure Power management using Fujitsu iRMC? > > > > > > > > > > Thanks & Regards > > > > > > > > > > Renchu Mathew > > > > > > > > > > -----Original Message----- > > > > > From: Martin Perina [mailto:mper...@redhat.com] > > > > > Sent: Thursday, January 22, 2015 1:58 PM > > > > > To: Renchu Mathew > > > > > Cc: users@ovirt.org > > > > > Subject: Re: [ovirt-users] Power Management config on Ovirt > > > > > > > > > > Hi, > > > > > > > > > > first of all are you sure that Fujitsu PRIMERGY is accessible > > > using > > > > > IPMI protocol? If so, could you provide engine.log and also > > > vdsm.log > > > > > from host that was used as fencing proxy? You can find out which > > > host > > > > > is used as a proxy either in Events tab after you execute the test > > > or in engine.log. > > > > > > > > > > Thanks > > > > > > > > > > Martin Perina > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Renchu Mathew" <ren...@cracknell.com> > > > > > > To: users@ovirt.org > > > > > > Sent: Thursday, January 22, 2015 7:41:43 AM > > > > > > Subject: [ovirt-users] Power Management config on Ovirt > > > > > > > > > > > > > > > > > > > > > > > > Dear all, > > > > > > > > > > > > > > > > > > > > > > > > I am trying to configure power management on ovirt v3.5 > > > > > > (ovirt-node-iso-3.5.0.ovirt35.20140912.el6) and using two > > > > Fujitsu > > > > > > PRIMERGY > > > > > > RX2540 M1 as node hypervisor. I used Fujitsu iRMC port on power > > > > > > management configuration. The test gives a message “Test failed, > > > > > > argument of type ‘NoneType’ is not iterable” as below . Also > > > > tried > > > > > > rsb type as per redhat document. > > > > > > > > > > > > > > > > > > > > > > > > Fence-agents-3.1.5-35.el6_5.4.x86_64 is there on both nodes. Do > > > > we > > > > > > need to specify anything in Options? > > > > > > > > > > > > > > > > > > > > > > > > Please help me. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best Regards > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Renchu Mathew > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Users mailing list > > > > > > Users@ovirt.org<mailto:Users@ovirt.org> > > > > > > http://lists.ovirt.org/mailman/listinfo/users > > > > > > > > > > > > > > _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users