On 03/10/2015 04:58 AM, Simone Tiraboschi wrote: > > ----- Original Message ----- >> From: "Bob Doolittle" <b...@doolittle.us.com> >> To: "Simone Tiraboschi" <stira...@redhat.com> >> Cc: "users-ovirt" <users@ovirt.org> >> Sent: Monday, March 9, 2015 11:48:03 PM >> Subject: Re: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on F20 >> (The VDSM host was found in a failed >> state) >> >> >> On 03/09/2015 02:47 PM, Bob Doolittle wrote: >>> Resending with CC to list (and an update). >>> >>> On 03/09/2015 01:40 PM, Simone Tiraboschi wrote: >>>> ----- Original Message ----- >>>>> From: "Bob Doolittle" <b...@doolittle.us.com> >>>>> To: "Simone Tiraboschi" <stira...@redhat.com> >>>>> Cc: "users-ovirt" <users@ovirt.org> >>>>> Sent: Monday, March 9, 2015 6:26:30 PM >>>>> Subject: Re: [ovirt-users] Error during hosted-engine-setup for 3.5.1 on >>>>> F20 (Cannot add the host to cluster ... SSH >>>>> has failed) >>>>> ... >>>>> OK, I've started over. Simply removing the storage domain was >>>>> insufficient, >>>>> the hosted-engine deploy failed when it found the HA and Broker services >>>>> already configured. I decided to just start over fresh starting with >>>>> re-installing the OS on my host. >>>>> >>>>> I can't deploy DNS at the moment, so I have to simply replicate >>>>> /etc/hosts >>>>> files on my host/engine. I did that this time, but have run into a new >>>>> problem: >>>>> >>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status! >>>>> Enter the name of the cluster to which you want to add the host >>>>> (Default) [Default]: >>>>> [ INFO ] Waiting for the host to become operational in the engine. This >>>>> may >>>>> take several minutes... >>>>> [ ERROR ] The VDSM host was found in a failed state. Please check engine >>>>> and >>>>> bootstrap installation logs. >>>>> [ ERROR ] Unable to add ovirt-vm to the manager >>>>> Please shutdown the VM allowing the system to launch it as a >>>>> monitored service. >>>>> The system will wait until the VM is down. >>>>> [ ERROR ] Failed to execute stage 'Closing up': [Errno 111] Connection >>>>> refused >>>>> [ INFO ] Stage: Clean up >>>>> [ ERROR ] Failed to execute stage 'Clean up': [Errno 111] Connection >>>>> refused >>>>> >>>>> >>>>> I've attached my engine log and the ovirt-hosted-engine-setup log. I >>>>> think I >>>>> had an issue with resolving external hostnames, or else a connectivity >>>>> issue >>>>> during the install. >>>> For some reason your engine wasn't able to deploy your hosts but the SSH >>>> session this time was established. >>>> 2015-03-09 13:05:58,514 ERROR >>>> [org.ovirt.engine.core.bll.InstallVdsInternalCommand] >>>> (org.ovirt.thread.pool-8-thread-3) [3cf91626] Host installation failed >>>> for host 217016bb-fdcd-4344-a0ca-4548262d10a8, ovirt-vm.: >>>> java.io.IOException: Command returned failure code 1 during SSH session >>>> 'r...@xion2.smartcity.net' >>>> >>>> Can you please attach host-deploy logs from the engine VM? >>> OK, attached. >>> >>> Like I said, it looks to me like a name-resolution issue during the yum >>> update on the engine. I think I've fixed that, but do you have a better >>> suggestion for cleaning up and re-deploying other than installing the OS >>> on my host and starting all over again? >> I just finished starting over from scratch, starting with OS installation on >> my host/node, and wound up with a very similar problem - the engine couldn't >> reach the hosts during the yum operation. But this time the error was >> "Network is unreachable". Which is weird, because I can ssh into the engine >> and ping many of those hosts, after the operation has failed. >> >> Here's my latest host-deploy log from the engine. I'd appreciate any clues. > It seams that now your host is able to resolve that addresses but it's not > able to connect over http. > On your hosts some of them resolves as IPv6 addresses; can you please try to > use curl to get one of the file that it wasn't able to fetch? > Can you please check your network configuration before and after host-deploy?
I can give you the network configuration after host-deploy, at least for the host/Node. The engine won't start for me this morning, after I shut down the host for the night. In order to give you the config before host-deploy (or, apparently for the engine), I'll have to re-install the OS on the host and start again from scratch. Obviously I'd rather not do that unless absolutely necessary. Here's the host config after the failed host-deploy: Host/Node: # ip route 169.254.0.0/16 dev ovirtmgmt scope link metric 1007 172.16.0.0/16 dev ovirtmgmt proto kernel scope link src 172.16.0.58 # ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: p3p2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master ovirtmgmt state UP group default qlen 1000 link/ether b8:ca:3a:79:22:12 brd ff:ff:ff:ff:ff:ff inet6 fe80::baca:3aff:fe79:2212/64 scope link valid_lft forever preferred_lft forever 3: bond0: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN group default link/ether 56:56:f7:cf:73:27 brd ff:ff:ff:ff:ff:ff 4: wlp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000 link/ether 1c:3e:84:50:8d:c3 brd ff:ff:ff:ff:ff:ff 6: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default link/ether 22:a1:01:9e:30:71 brd ff:ff:ff:ff:ff:ff 7: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default link/ether b8:ca:3a:79:22:12 brd ff:ff:ff:ff:ff:ff inet 172.16.0.58/16 brd 172.16.255.255 scope global ovirtmgmt valid_lft forever preferred_lft forever inet6 fe80::baca:3aff:fe79:2212/64 scope link valid_lft forever preferred_lft forever The only unusual thing about my setup that I can think of, from the network perspective, is that my physical host has a wireless interface, which I've not configured. Could it be confusing hosted-engine --deploy? -Bob _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users