On Wed, Feb 3, 2016 at 1:54 PM, Elad Ben Aharon <ebena...@redhat.com> wrote:
> Yes, you're right. > > # The following are used only for iSCSI storage > iqn= > portal= > user= > password= > port= > > > Simone, what do you think, will it be possible to add targets in > hosted-engine.conf as a workaround? > I don't see any possible workaround here. We need to implement something in ovrt-ha-agent for that, it's an RFE for 4.0, let's see if we can get it back to 3.6.z > > > On Wed, Feb 3, 2016 at 2:46 PM, gflwqs gflwqs <gfl...@gmail.com> wrote: > >> Yes but i have to change the config for the HE in >> /etc/ovirt-hosted-engine/hosted-engine.conf so how should that look like? >> There is only one variable for storage and since there is dual pathing >> there is 2 ip:s so is there some other config for multipathing? >> >> storage=x.x.x.x >> >> 2016-02-03 13:17 GMT+01:00 Elad Ben Aharon <ebena...@redhat.com>: >> >>> The scenario of manually connecting the hosted-engine host to several >>> paths wasn't tested before, but by theory it should work. >>> As you said, the host should be set to global maintenance, disconnected >>> from the single iSCSI session [1] and reconnected to the dual paths [2]. >>> Then host re-activation. >>> >>> [1] # iscsiadm -m session -u >>> # iscsiadm -m node -o delete >>> [2] # iscsiadm -m discovery -t sendtargets -p target_IP:port >>> # iscsiadm -m node target_name -l >>> >>> On Wed, Feb 3, 2016 at 12:12 PM, gflwqs gflwqs <gfl...@gmail.com> wrote: >>> >>>> So does that mean i can change it if i put the HE into global >>>> maintenance and restart it? >>>> If that is possible then it is ok for me? >>>> >>>> /Christian >>>> >>>> 2016-02-03 11:07 GMT+01:00 Elad Ben Aharon <ebena...@redhat.com>: >>>> >>>>> Hi, >>>>> >>>>> Deployment over more than one path is currently not supported. There >>>>> is a request for it: >>>>> https://bugzilla.redhat.com/show_bug.cgi?id=1193961 >>>>> I can't think of a way for manually change to dual paths and keep the >>>>> VM running without interruptions. >>>>> >>>>> Adding Simone and Nir who might have an idea. >>>>> >>>>> >>>>> On Wed, Feb 3, 2016 at 10:37 AM, gflwqs gflwqs <gfl...@gmail.com> >>>>> wrote: >>>>> >>>>>> Hi List, >>>>>> >>>>>> I have installed the hosted engine over iscsi but have a problem >>>>>> getting it to install over the multipath, even though i can see the >>>>>> multipath device from the host with multipath -ll. >>>>>> >>>>>> When i get to the point in the HE installer where i should choose the >>>>>> disk i only see the underlying devices like sdb sdc. So if i choose one >>>>>> of >>>>>> those it results in that it will only use one of the paths! >>>>>> >>>>>> My questions is: >>>>>> - Is there a bug in the installer script or am i doing something >>>>>> wrong? >>>>>> - I now have a running HE and would like to manually change the >>>>>> single path to dual, how do i accomplish this? >>>>>> >>>>>> I am running ovirt 3.5.6.2. >>>>>> >>>>>> Regards >>>>>> Christian >>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users@ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> >>>>> >>>> >>> >> >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users