Same bsod was with win2008 server, in order to fix it we changed nics to e1000 and disks to IDE. Now it boots w/o trouble. Am 10.05.2016 7:43 nachm. schrieb "Cam Mac" <iuco...@gmail.com>:
> Hi Tomas, > > The install went ok, but Windows complains: > > "File: \windows\system32\drivers\vioscsi.sys > status: 0xc0000428 > Windows cannot verify the digital signature for this file" > > Regards, > > Campbell > > On Tue, May 10, 2016 at 6:29 PM, Cam Mac <iuco...@gmail.com> wrote: > >> Hi Tomas, >> >> Thanks, I will test that later tonight and let you know. >> >> Regards, >> >> Cam >> >> On Tue, May 10, 2016 at 3:28 PM, Tomas Jelinek <tjeli...@redhat.com> >> wrote: >> >>> Hi, >>> >>> please try to install this guest tools: >>> >>> http://resources.ovirt.org/pub/ovirt-3.6/rpm/el6/noarch/ovirt-guest-tools-iso-3.6-3.fc23.noarch.rpm >>> >>> Also please make sure you point windows to the correct driver in the >>> sub-directory for w7 >>> >>> Tomas >>> >>> ----- Original Message ----- >>> > From: "Cam Mac" <iuco...@gmail.com> >>> > To: users@ovirt.org >>> > Sent: Monday, May 9, 2016 7:28:57 PM >>> > Subject: [ovirt-users] vioscsi.sys BSOD with Win 7 >>> > >>> > Hi, >>> > >>> > I'm running oVirt 3.6.3.4-1.el7.centos and when I install a Win 7 >>> guest VM, >>> > using VirtIO disk, networking etc, it goes through the install process >>> ok, >>> > but blue screens upon boot with a vioscsi.sys error (attached). I have >>> tried >>> > the official version ovirt-guest-tools-iso 3.6.0 0.2_master.fc22, as >>> well as >>> > some earlier and later versions. I am using a PXE boot method with a >>> Windows >>> > deployment server, which has the drivers from the oVirt tools ISO >>> installed >>> > (indeed, it picks up the drive and networking and I can see it >>> installing >>> > the drivers). I have tried with the generic IDE and rtl8139 config on >>> the >>> > guest, and it also fails with the same vioscsi.sys error after >>> rebooting >>> > upon finishing installation even though I'm using IDE as the disk >>> driver. >>> > >>> > I have uploaded a win 7 x64 ISO and tried installing that, and it >>> loads the >>> > VirtIO viostor driver (using the method at: >>> > >>> https://www.ovirt.org/documentation/how-to/virtual-machines/create-a-windows-7-virtual-machine/ >>> > ), and even manages to partition the disks, but fails to install on >>> the disk >>> > (screenshot attached). >>> > >>> > I've tried temporarily removing the vioscsi files from the install >>> server as >>> > a last resort, but as expected it fails to install properly, though I >>> > thought it used the viostor driver instead. >>> > >>> > Thanks for any help. >>> > >>> > Regards, >>> > >>> > Cam >>> > >>> > _______________________________________________ >>> > Users mailing list >>> > Users@ovirt.org >>> > http://lists.ovirt.org/mailman/listinfo/users >>> > >>> >> >> > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users