> On Jun 9, 2016, at 10:03 AM, Anantha Raghava <[email protected]> 
> wrote:
> 
> Hello Michal,
> 
> The live migration fails as mentioned in below mail thread. Events does not 
> provide much details, but shows fails. Screen shot is attached. Host upgrade 
> also fails as it cannot move running VM to another host, put host in 
> maintenance mode.
> 
> <Capture.PNG>

Well the only way for you to figure out why it fails is to look at 
/var/log/vdsm/vdsm.log on the SourceHost (Host-1) and DestinationHost (Host-2) 
and see what the logs are saying, you should be finding there some ‘ERROR’ or 
at least ‘WARNING’ entries.

> 
> -- 
> 
> Thanks & Regards,
> Anantha Raghava
> 
> On Wednesday 08 June 2016 07:58 PM, Anantha Raghava wrote:
>> Hello Michal,
>> 
>> The Live Migration fails. Events does not show any information but just 
>> mentioning migration failed. This happens even when we put the host into 
>> maintenance. VMs do not migrate and host fails to move into maintenance mode.
>> 
>> Attempted to upgrade the Hosts, but failed, no reasons attached.
>> 
>> I am a bit lost at this stage. Should we check for some more information in 
>> some logs? If yes, where do we find the logs?
>> -- 
>> 
>> Thanks & Regards,
>> Anantha Raghava
>> 
>> On Tuesday 07 June 2016 11:13 PM, Anantha Raghava wrote:
>>> Hello Michal,
>>> 
>>> Guest tools are working and getting all details about guest vm as needed.
>>> 
>>> But one thing I didn't understand. What is the relationship between 
>>> virtioserial driver and oVirt Guest Service? Without virtio serial driver, 
>>> guest services does not start.
>>> 
>>> Also, how do we install memory baloon driver?
>>> 
>>> Tomorrow morning, I will post about Live Migration events after I attempt 
>>> it.
>>> -- 
>>> 
>>> Thanks & Regards,
>>> 
>>> 
>>> 
>>> Anantha Raghava
>>> 
>>> On Friday 03 June 2016 04:36 PM, Michal Skrivanek wrote:
>>>> 
>>>>> On 03 Jun 2016, at 12:57, Anantha Raghava <[email protected] 
>>>>> <mailto:[email protected]>> wrote:
>>>>> 
>>>>> Hello Michal,
>>>>> 
>>>>> Thanks for quick feed back.
>>>>> 
>>>>> Windows Guests Agents - Where do I download them from? Not getting the 
>>>>> proper links. Or is to a part of virt-drivers that we use during 
>>>>> installation.
>>>> 
>>>> Hi Anantha,
>>>> it’s part of ovirt-guest-tools. See  
>>>> <http://lists.ovirt.org/pipermail/users/2016-May/039779.html>http://lists.ovirt.org/pipermail/users/2016-May/039779.html
>>>>  <http://lists.ovirt.org/pipermail/users/2016-May/039779.html>
>>>> 
>>>>> 
>>>>> Live migration failure - These are pretty busy VMs if not big. The event 
>>>>> does not show any specific message but just as migration failed. Is the 
>>>>> reason logged somewhere? Please share the log location so that I can 
>>>>> check & share the log for meaningful message and proper screen shots.
>>>> 
>>>> There should be more details in the events at the bottom of the webadmin 
>>>> page (just make it a bit bigger it may not be te last message)
>>>> If they are busy VMs then you may have issues migrating them. There is 
>>>> some simple tuning available and it may help. You can increase the maximum 
>>>> downtime in VM properties dialog (500ms by default, you can go up to 
>>>> whatever is feasible for your VM, seconds, tens of seconds)
>>>> Bandwidth is limited to work on 1Gb network, if you have 10Gb availabl you 
>>>> can also tune /etc/vdsm.conf on each host and increase the maximum 
>>>> bandwidth 10 times
>>>> 
>>>> Thanks,
>>>> michal
>>>> 
>>>>> 
>>>>> --
>>>>> Thanks & Regards,
>>>>> 
>>>>> 
>>>>> 
>>>>> Anantha Raghava
>>>>> 
>>>>>>> On 03 Jun 2016, at 07:14, Anantha Raghava 
>>>>>>> <[email protected] <mailto:[email protected]>> 
>>>>>>> wrote:
>>>>>>> 
>>>>>>> Hi,
>>>>>>> 
>>>>>>> We have just installed oVirt 3.6 on 3 hosts with storage volumes on 
>>>>>>> Fibre Channel storage box. Every thing is working fine except the 
>>>>>>> following.
>>>>>>> 
>>>>>>> 1. We have created 15 Virtual Machines all VM with Windows Server 2012 
>>>>>>> R2 OS. VM properties does not report the Operating System nor it shows 
>>>>>>> the IP and FQDN in the Admin Portal. There is always an exclamation 
>>>>>>> mark that reports about OS being different from the template and 
>>>>>>> timezone issues. We have changed the timezone to Indian Standard Time 
>>>>>>> in both VM and Host, same result continues. We have installed Windows 
>>>>>>> Gues Tools, same result continues. Screen shot is below.
>>>>>> 
>>>>>> you doesn’t seem to run the guest agent. Make sure the service is 
>>>>>> started and works, then you’ll see IPs and more detailed info about each 
>>>>>> guest, and exclamation marks should go away
>>>>>> 
>>>>>>> 
>>>>>>> <VMs.PNG>
>>>>>>> 
>>>>>>> 2. When we manually tried to migrate the VMs from one host to another 
>>>>>>> one, the migration gets initiated, but will eventually fail.
>>>>>>> 
>>>>>>> Any specific setting missing here or is it a bug.
>>>>>> 
>>>>>> are they big or busy VMs? What does it fail on? There should be a 
>>>>>> menaingful message even if it’s just a timeout
>>>>>> 
>>>>>>> 
>>>>>>> Note: 
>>>>>>> 
>>>>>>> All hosts are installed with CentOS 7.2 minimal installation oVirt node 
>>>>>>> is installed and activated.
>>>>>>> We do not have a DNS in our environment. We have to do with IPs. 
>>>>>> 
>>>>>> as long as engine works with FQDN it’s ok
>>>>>> 
>>>>>>> We are yet to apply the 3.6.6 patch on Engine and Nodes.
>>>>>> 
>>>>>> that may help with some of the issues above, so please try to do that 
>>>>>> 
>>>>>> Thanks,
>>>>>> michal
>>>>>> 
>>>>>>> We are running a stand alone engine, not a Hosted Engine.
>>>>>>> -- 
>>>>>>> Thanks & Regards,
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> Anantha Raghava
>>>>>>> eXza Technology Consulting & Services
>>>>>>> 
>>>>>>> _______________________________________________
>>>>>>> Users mailing list
>>>>>>> [email protected] <mailto:[email protected]>
>>>>>>> http://lists.ovirt.org/mailman/listinfo/users 
>>>>>>> <http://lists.ovirt.org/mailman/listinfo/users>
>>>>>> 
>>>>> 
>>>> 
>>> 
>> 
> 
> _______________________________________________
> Users mailing list
> [email protected]
> http://lists.ovirt.org/mailman/listinfo/users

_______________________________________________
Users mailing list
[email protected]
http://lists.ovirt.org/mailman/listinfo/users

Reply via email to