As I remember the IBoIP is not fully implemented Ethernet protocol, it does not support bridging.
*********************************************************** Dr. Arman Khalatyan eScience -SuperComputing Leibniz-Institut für Astrophysik Potsdam (AIP) An der Sternwarte 16, 14482 Potsdam, Germany *********************************************************** On Mon, Jul 4, 2016 at 2:58 PM, Yevgeny Zaspitsky <yzasp...@redhat.com> wrote: > Hello, > > What's "couple of vdsm hooks"? Could you provide the source code of those? > > Regards, > Yevgeny > > On Mon, Jul 4, 2016 at 1:43 PM, Giorgio Biacchi <gior...@di.unimi.it> > wrote: > >> Hi list, >> I'm trying a test installation of the new Ovirt Node Image and engine >> before >> upgrading my 3.6 installation. >> >> In my current environment every hypervisor access the NFS shared data >> domain via >> infiniband. With a couple of vdsm hooks I was able to set the infiniband >> link in >> connected mode and set a MTU of 65520. In my case the infiniband link is >> used as >> a common NIC, I don't use RDMA, only IP over infiniband to access the >> data domain. >> >> Now, when I attempt to setup host networking, the system try to bridge the >> connection "ibstorage" (defined in networks tab) with ib0 device. But a >> non >> ethernet device cannot be bridged that way and host networking setup >> fails. >> >> Any idea or suggestion? With 3.6 (node and engine) all was fine. >> >> Thanks >> -- >> gb >> >> PGP Key: http://pgp.mit.edu/ >> Primary key fingerprint: C510 0765 943E EBED A4F2 69D3 16CC DC90 B9CB 0F34 >> _______________________________________________ >> Users mailing list >> Users@ovirt.org >> http://lists.ovirt.org/mailman/listinfo/users >> > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
