on Host-01 [root@localhost ~]# hostname localhost.localdomain
on Engine VM [root@engine ~]# hostname engine.ovirt.hscloud [root@engine ~]# engine-setup --== CONFIGURATION PREVIEW ==-- Bridge interface : em1 Engine FQDN : engine.ovirt.hscloud Bridge name : ovirtmgmt * Host address : localhost.localdomain* SSH daemon port : 22 Gateway address : 10.0.100.2 Host name for web application : hosted_engine_1 Storage Domain type : glusterfs Host ID : 1 Image size GB : 10 GlusterFS Share Name : hosted_engine_glusterfs GlusterFS Brick Provisioning : False Storage connection : 10.0.100.17:/ovirt-engine Console type : vnc Memory size MB : 16384 MAC address : 00:16:3e:1b:0f:e2 Boot type : disk Number of CPUs : 4 OVF archive (for disk boot) : /usr/share/ovirt-engine-appliance/ovirt-engine-appliance-3.6-20160623.1.el7.centos.ova CPU Type : model_Haswell-noTSX On Fri, Jul 8, 2016 at 8:36 PM, Simone Tiraboschi <stira...@redhat.com> wrote: > On Thu, Jul 7, 2016 at 5:44 PM, Dewey Du <dewe...@gmail.com> wrote: > > "PermitRootLogin without-password" is disabled. Is this a MUST? I am > > following the steps from the link below, and there is no steps needed to > > enable "PermitRootLogin without-password". > > No, it's not. > The engine will connect using a key deployed on the host by > hosted-engine-setup. > > > > http://blogs-ramesh.blogspot.jp/2016/01/ovirt-and-gluster-hyperconvergence.html > > > > Do you have anyother instructions to setup > > ovirt-and-gluster-hyperconvergence? > > > > By the way, the "localhost.localdomain" in the engine.log "Failed to > > authenticate session with host 'hosted_engine_1': SSH authentication to > > 'root@localhost.localdomain' failed." means the engine VM or Host-01? > > It means the engine and the issue is just there. > Can you please check the hostname of your host? > We had a bug in past about that but now hosted-engine-setup should > refuse to deploy, which version are you using? > > > On Thu, Jul 7, 2016 at 4:11 PM, Ramesh Nachimuthu <rnach...@redhat.com> > > wrote: > >> > >> Hi Dewey, > >> > >> Looks like SSH login from Engine VM to 'Host-01' is failing. Can you > >> confirm that "PermitRootLogin without-password" is enabled on 'Host-01' > >> where you are running " hosted-engine --deploy " > >> > >> > >> Regards, > >> Ramesh > >> > >> ----- Original Message ----- > >> > From: "Dewey Du" <dewe...@gmail.com> > >> > To: "Scott" <romra...@gmail.com> > >> > Cc: "users" <users@ovirt.org> > >> > Sent: Thursday, July 7, 2016 1:11:14 PM > >> > Subject: Re: [ovirt-users] Fail to setup Hyperconverged Infrastructure > >> > using oVirt and Gluster > >> > > >> > On Engine VM, the command " engine-setup " is executed successfully. > >> > > >> > On Host-01 which running the command " hosted-engine --deploy " > >> > always display the following message: > >> > > >> > Make a selection from the options below: > >> > (1) Continue setup - oVirt-Engine installation is ready and > ovirt-engine > >> > service is up > >> > (2) Abort setup > >> > (3) Power off and restart the VM > >> > (4) Destroy VM and abort setup > >> > (1, 2, 3, 4)[1]: 1 > >> > > >> > My engine.log on Engine VM is attached below > >> > > >> > 2016-07-05 15:55:54,086 ERROR > >> > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) > >> > [77e52cbc] Failed to authenticate session with host 'hosted_engine_1': > >> > SSH > >> > authentication to 'root@localhost.localdomain' failed. Please verify > >> > provided credentials. Make sure key is authorized at host > >> > 2016-07-05 15:55:54,086 WARN > >> > [org.ovirt.engine.core.bll.hostdeploy.AddVdsCommand] (default task-17) > >> > [77e52cbc] CanDoAction of action 'AddVds' failed for user > >> > admin@internal. > >> > Reasons: VAR__ACTION__ADD,VAR__TYPE__HOST,$server > >> > localhost.localdomain,VDS_CANNOT_AUTHENTICATE_TO_SERVER > >> > 2016-07-05 15:55:54,098 ERROR > >> > [org.ovirt.engine.api.restapi.resource.AbstractBackendResource] > (default > >> > task-17) [] Operation Failed: [Cannot add Host. SSH authentication > >> > failed, > >> > verify authentication parameters are correct (Username/Password, > >> > public-key > >> > etc.) You may refer to the engine.log file for further details.] > >> > > >> > On Sun, Jul 3, 2016 at 11:27 PM, Scott < romra...@gmail.com > wrote: > >> > > >> > > >> > > >> > Do you have root logins disabled in SSH? If I remember right, oVirt > will > >> > use > >> > SSH keys once configured so you need "PermitRootLogin > without-password" > >> > at a > >> > minimum. > >> > > >> > The engine log and your auth/secure log on the host should probably > give > >> > you > >> > some idea of what happened. > >> > > >> > Scott > >> > > >> > On Sun, Jul 3, 2016 at 10:13 AM Dewey Du < dewe...@gmail.com > wrote: > >> > > >> > > >> > > >> > oVirt 3.6 > >> > > >> > # hosted-engine --deploy > >> > > >> > [ ERROR ] Cannot automatically add the host to cluster Default: Cannot > >> > add > >> > Host. SSH authentication failed, verify authentication parameters are > >> > correct (Username/Password, public-key etc.) You may refer to the > >> > engine.log > >> > file for further details. > >> > > >> > Has anyone encountered this issue before? Thx. > >> > _______________________________________________ > >> > Users mailing list > >> > Users@ovirt.org > >> > http://lists.ovirt.org/mailman/listinfo/users > >> > > >> > > >> > _______________________________________________ > >> > Users mailing list > >> > Users@ovirt.org > >> > http://lists.ovirt.org/mailman/listinfo/users > >> > > > > > > > > > _______________________________________________ > > Users mailing list > > Users@ovirt.org > > http://lists.ovirt.org/mailman/listinfo/users > > >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users