No problem I checked it out and applied it, no solution it seems.
2016-07-21 12:14 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: > On Thu, Jul 21, 2016 at 12:09 PM, Matt . <yamakasi....@gmail.com> wrote: >> OK, I did a deploy from the engine and the Hosted is "Not Active" and > > Yes, sorry, I forgot to mention that. > We have an open bug about re-activating an hosted-engine host from the > engine: https://bugzilla.redhat.com/show_bug.cgi?id=1353600 > Connecting to the host and exiting the maintenance mode from there is > the temporary solution. > >> Engine HA is empty on 4.0.1 >> >> 2016-07-21 11:58 GMT+02:00 Matt . <yamakasi....@gmail.com>: >>> True, but you can up an IP on any device in that case because you know >>> what you are doing. >>> >>> I think that this can be finetuned, or at least multiple IPs would be >>> nice as I now need to add one IP from my vrrp setup, so if there is a >>> failover.... or I need to take down the second switch I'm also done. >>> >>> 2016-07-21 10:23 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>> On Thu, Jul 21, 2016 at 10:03 AM, Matt . <yamakasi....@gmail.com> wrote: >>>>> OK, I will check this laster on, as I was having issues with the >>>>> deploy from the GUI before as nothing really happened, I thought it >>>>> was a bug on the first 4.0 release ? >>>>> >>>>> I think this should be investigated, the whole deployment as it would >>>>> be good to have the possibility to list some GW's in case you use >>>>> failover. >>>>> >>>>> I was even thinking of setting the engine IP there, should be working >>>>> as good as also. >>>> >>>> Not really since the agent is pinging also when the engine VM is down >>>> due to maintenance. >>>> >>>>> 2016-07-21 9:53 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>> On Thu, Jul 21, 2016 at 9:47 AM, Matt . <yamakasi....@gmail.com> wrote: >>>>>>> OK, I already thought that but where is this saved as I don't have any >>>>>>> rights as root to the ha_agent folder on the HE storage ? >>>>>> >>>>>> It's not a folder: it's a tar file directly saved over a VDSM volume. >>>>>> Editing it's a bit tricky. >>>>>> >>>>>>> In worst case scenario, how would i be able to deploy a new hosted >>>>>>> engine from a hosted engine ? This sounds undoable to me and also >>>>>>> unwanted as the HE is OK so far. >>>>>> >>>>>> With a 4.0 engine, when you choose to deploy a new host from the >>>>>> webadmin or from the rest API you can also choose to deploy it as an >>>>>> hosted-engine host if the engine has been deployed with hosted-engine. >>>>>> In this case, if I'm not wrong, you can also specify a different gateway >>>>>> value. >>>>>> >>>>>> >>>>>>> 2016-07-21 9:41 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>>>> On Thu, Jul 21, 2016 at 9:27 AM, Matt . <yamakasi....@gmail.com> wrote: >>>>>>>>> Even when I change that on each host before I do a new deploy it still >>>>>>>>> uses the old GW address. >>>>>>>> >>>>>>>> If you deploy additional hosts with the CLI utility, each new host >>>>>>>> will be deployed consuming the answerfile generated by the first host >>>>>>>> and saved on the shared storage. >>>>>>>> You have to manually tweak there if you to avoid. >>>>>>>> >>>>>>>> Another smarted option is to deploy additional HE host from the >>>>>>>> webadmin interface. >>>>>>>> >>>>>>>> >>>>>>>>> 2016-07-21 9:24 GMT+02:00 Simone Tiraboschi <stira...@redhat.com>: >>>>>>>>>> On Wed, Jul 20, 2016 at 11:57 PM, Matt . <yamakasi....@gmail.com> >>>>>>>>>> wrote: >>>>>>>>>>> OK, I tried to edit the answerfiles on the other hosts to use >>>>>>>>>>> another >>>>>>>>>>> IP but it doesn't ping and still uses the old GW address. >>>>>>>>>>> >>>>>>>>>>> Any idea ? >>>>>>>>>> >>>>>>>>>> The gateway address is saved under >>>>>>>>>> /etc/ovirt-hosted-engine/hosted-engine.conf >>>>>>>>>> on each host. >>>>>>>>>> >>>>>>>>>>> 2016-07-20 22:27 GMT+02:00 Matt . <yamakasi....@gmail.com>: >>>>>>>>>>>> Maybe it's a good idea to be able to add multiple addresses it >>>>>>>>>>>> should >>>>>>>>>>>> ping in order of response. >>>>>>>>>>>> >>>>>>>>>>>> 2016-07-20 22:13 GMT+02:00 Sandro Bonazzola <sbona...@redhat.com>: >>>>>>>>>>>>> Il 20/Lug/2016 10:06 PM, "Matt ." <yamakasi....@gmail.com> ha >>>>>>>>>>>>> scritto: >>>>>>>>>>>>>> >>>>>>>>>>>>>> Hi, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I'm trying to add a host to a HE installation but my gateway is >>>>>>>>>>>>>> not >>>>>>>>>>>>>> pingable. It's a floating IP which is usable but not pingable in >>>>>>>>>>>>>> this >>>>>>>>>>>>>> case. >>>>>>>>>>>>>> >>>>>>>>>>>>>> During the first install of the HE I could give any IP to ping >>>>>>>>>>>>>> and I >>>>>>>>>>>>>> used a source IP for the floating GW address. >>>>>>>>>>>>>> >>>>>>>>>>>>>> What can I do to get around this as the network is OK, even when >>>>>>>>>>>>>> the >>>>>>>>>>>>>> GW is not pingable. >>>>>>>>>>>>> >>>>>>>>>>>>> I think that gw not pingable will be interpreted as network >>>>>>>>>>>>> failure by the >>>>>>>>>>>>> agent and will lower the score of the hosts. >>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> Any idea is welcome! >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks! >>>>>>>>>>>>>> _______________________________________________ >>>>>>>>>>>>>> Users mailing list >>>>>>>>>>>>>> Users@ovirt.org >>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users