On Thu, Aug 25, 2016 at 11:19 AM, Alexis HAUSER <alexis.hau...@telecom-bretagne.eu> wrote: >>No, it's not: you have to point to the same storage server you used >>for the first host, hosted-engine-setup will detect the existing >>installation and it will ask if you are going to add an additional >>host. >>At that point it will consume the answer file saved on the shared storage. > > > This is exactly what I've done but it stills asks me those question about > FQDN, hostname and password, and as we can see it seems to find the answer > file : > > > > > > > > hosted-engine --deploy > [ INFO ] Stage: Initializing > [ INFO ] Generating a temporary VNC password. > [ INFO ] Stage: Environment setup > Continuing will configure this host for serving as hypervisor and > create a VM where you have to install the engine afterwards. > Are you sure you want to continue? (Yes, No)[Yes]: > Configuration files: [] > Log file: > /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160825082809-4evynk.log > Version: otopi-1.4.2 (otopi-1.4.2-1.el7ev) > It has been detected that this program is executed through an SSH > connection without using screen. > Continuing with the installation may lead to broken installation if > the network connection fails. > It is highly recommended to abort the installation and run it > inside a screen session using command "screen". > Do you want to continue anyway? (Yes, No)[No]: yes > [ INFO ] Hardware supports virtualization > [ INFO ] Bridge ovirtmgmt already created > [ INFO ] Stage: Environment packages setup > [ INFO ] Stage: Programs detection > [ INFO ] Stage: Environment setup > [ INFO ] Stage: Environment customization > > --== STORAGE CONFIGURATION ==-- > > During customization use CTRL-D to abort. > Please specify the storage you would like to use (glusterfs, iscsi, > fc, nfs3, nfs4)[nfs3]: iscsi > Please specify the iSCSI portal IP address: x.x.x.x > Please specify the iSCSI portal port [3260]: > Please specify the iSCSI portal user: > Please specify the target name > (iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx, > iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx, > iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx, > iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) > [iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]: > The following luns have been found on the requested target: > [1] 36002219000897d5e000025bd5754b30f 836GiB DELL > MD3000i > status: used, paths: 1 active > > [2] 36002219000897d5e00002ea457a406f7 100GiB DELL > MD3000i > status: used, paths: 1 active > > [3] 36002219000897d5e00002e5357980305 150GiB DELL > MD3000i > status: free, paths: 1 active > > [4] 36002219000897d5e00002fa357ad109e 500GiB DELL > MD3000i > status: free, paths: 1 active > > [5] 36002219000897d5e00002fa857ad11c2 80GiB DELL > MD3000i > status: free, paths: 1 active > > [6] 36002219000897d5e00002f1657a920a2 587GiB DELL > MD3000i > status: used, paths: 1 active > > Please select the destination LUN (1, 2, 3, 4, 5, 6) [1]: 2 > The specified storage location already contains a data domain. Is > this an additional host setup (Yes, No)[Yes]? > [ INFO ] Installing on additional host > Please specify the Host ID [Must be integer, default: 2]: > > --== SYSTEM CONFIGURATION ==-- > > [WARNING] A configuration file must be supplied to deploy Hosted Engine on an > additional host. > [ INFO ] Answer file successfully loaded
It seams it correctly loaded it. > --== NETWORK CONFIGURATION ==-- > > [ INFO ] Additional host deployment, firewall manager is 'iptables' > The following CPU types are supported by this host: > - model_Haswell-noTSX: Intel Haswell-noTSX Family > - model_SandyBridge: Intel SandyBridge Family > - model_Westmere: Intel Westmere Family > - model_Nehalem: Intel Nehalem Family > - model_Penryn: Intel Penryn Family > - model_Conroe: Intel Conroe Family > > --== HOSTED ENGINE CONFIGURATION ==-- > > Enter the name which will be used to identify this host inside the > Administrator Portal [hosted_engine_2]: This is fine since the name of your new host is not in the answer file. > Enter 'admin@internal' user password that will be used for > accessing the Administrator Portal: > Confirm 'admin@internal' user password: This is fine too since we are not saving the admin password in the answer file. > [ INFO ] Stage: Setup validation > [WARNING] Cannot validate host name settings, reason: resolved host does not > match any of the local addresses > Please provide the address of this host. > Note: The engine VM and all the other hosts should be able to > correctly resolve it. > Host address: [localhost.localdomain]: This instead is an issue of your env: your additional host is still named 'localhost.localdomain': of course the engine VM will be able to resolve it but it will not reach your host; in that case the engine will just try to add the egnine VM itself as an host creating a mess. Since we saw this issue many times in the past from user logs, we are now explicitly rejecting 'localhost.localdomain' as an host address. _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users