Hi,
I've applied the patch on one off my host and restarted the hosted
engine as you wrote but it didn't help, the console button is still
grayed out and not available.
Rgds,
Arsène
On 04/18/2017 02:20 PM, Evgenia Tokar wrote:
Hi,
Thanks for bringing the issue to our attention and for answering the
questions.
There is a patch to fix this: https://gerrit.ovirt.org/#/c/75515/
After applying the patch a restart to the hosted engine vm is required
(not just the engine).
Let me know if you are still experiencing issues with this.
Thanks,
Jenny
On Wed, Apr 12, 2017 at 8:05 PM, Rafał Wojciechowski
<i...@rafalwojciechowski.pl <mailto:i...@rafalwojciechowski.pl>> wrote:
hi,
I will answer also. however I am using single hypervisor so
without ha and I have no performed steps:
https://www.ovirt.org/documentation/how-to/hosted-engine/
<https://www.ovirt.org/documentation/how-to/hosted-engine/>
1. yes - however I have to start in headless mode so it is quite
obvius
if I am trying to start with spice/vnc console I am getting
segfault from libvirtd
2. as above
3. as above
W dniu 12.04.2017 o 14:12, Arsène Gschwind pisze:
Hi all,
I will answer your questions:
1. definitively yes
2. the command hosted-engine --console works well and I'm able to
connect.
3. Here are the device entries
devices={device:qxl,alias:video0,type:video,deviceId:5210a3c3-9cc4-4aed-90c6-432dd2d37c46,address:{slot:0x02,
bus:0x00,domain:0x0000,type:pci,function:0x0}}
devices={device:console,type:console}
Thanks and rgds,
Arsène
On 04/12/2017 10:53 AM, Evgenia Tokar wrote:
Hi all,
I have managed to reproduce this issue and opened a bug for
tracking it: https://bugzilla.redhat.com/show_bug.cgi?id=1441570
<https://bugzilla.redhat.com/show_bug.cgi?id=1441570> .
There is no solution yet, but I would appreciate if any who
encountered this issue will answer some questions:
1. Is the console button greyed out in the UI?
2. On the hosted engine host, does the command hosted-engine
--console fails?
If it fails, try upgrading ovirt-hosted-engine-ha on the
hosted engine host. We had a bug related to this issue that was
fixed (https://bugzilla.redhat.com/show_bug.cgi?id=1364132
<https://bugzilla.redhat.com/show_bug.cgi?id=1364132>).
After upgrade and restart of the vm, this should work, and
you should be able to connect to the console.
3. On the hosted engine host look at the content of:
/var/run/ovirt-hosted-engine-ha/vm.conf
Does it contain a graphical device? Or a console device?
Thanks,
Jenny
On Mon, Apr 10, 2017 at 11:44 AM, Martin Sivak
<msi...@redhat.com <mailto:msi...@redhat.com>> wrote:
Hi,
we are working on that, we can only ask for patience now,
Jenny was trying to find out what happened and how to fix it
all week.
Best regards
--
Martin Sivak
SLA / oVirt
On Mon, Apr 10, 2017 at 9:38 AM, Rafał Wojciechowski
<i...@rafalwojciechowski.pl <mailto:i...@rafalwojciechowski.pl>>
wrote:
hi,
I have similiar issue(I also started my mailthread)
after upgrade 4.0 to 4.1
Version 4.1.1.8-1.el7.centos (before it was some 4.1.0.x
or similiar - update not fixed it)
to run VM I have to set in Console tab Headless mode -
without it I got libvirtd segfault(logs attached in my
mailthread).
So I am able to run VMs only without Console - do you
also have to set headless before run VM?
I noticed that libvirt-daemon was also upgraded to 2.0
version during ovirt upgrade - I dont think that 4.1 was
not testes due to such libvirtd upgrade... but maybe?
Regards,
Rafal Wojciechowski
W dniu 10.04.2017 o 08:24, Arsène Gschwind pisze:
Hi,
After updating to oVirt 4.1.1 Async release i can
confirm that the problem still persists.
Rgds,
Arsène
On 03/25/2017 12:25 PM, Arsène Gschwind wrote:
Hi,
After updating to 4.1.1 i'm observing the same
behavior, HE without any console.
Even when trying to edit the HE VMs it doesn't change
anything, Graphics stays to NONE.
Thanks for any Help.
Regards,
Arsène
On 03/24/2017 03:11 PM, Nelson Lameiras wrote:
Hello,
When upgrading my test setup from 4.0 to 4.1, my
engine vm lost it's console (from SPICE to None in GUI)
My test setup :
2 manually built hosts using centos 7.3, ovirt 4.1
1 manually built hosted engine centos 7.3, oVirt
4.1.0.4-el7, accessible with SPICE console via GUI
I updated ovirt-engine from 4.1.0 to 4.1.1 by doing
on engine :
- yum update
- engine-setup
- reboot engine
When accessing 4.1.1 GUI, Graphics is set to "None"
on "Virtual Machines" page, with "console button"
greyed out (all other VMs have the same Graphics set
to the same value as before)
I tried to edit engine VM settings, and console
options are same as before (SPLICE, QXL).
I'm hopping this is not a new feature, since if we
loose network on engine, console is the only way to
debug...
Is this a bug?
ps. I was able to reproduce this bug 2 times
cordialement, regards,
<https://www.lyra-network.com/>
Nelson LAMEIRAS
Ingénieur Systèmes et Réseaux/ Systems and Networks
engineer
Tel: +33 5 32 09 09 70
nelson.lamei...@lyra-network.com
<mailto:nelson.lamei...@lyra-network.com>
www.lyra-network.com <https://www.lyra-network.com/>
| www.payzen.eu <https://payzen.eu>
<https://www.youtube.com/channel/UCrVl1CO_Jlu3KbiRH-tQ_vA>
<https://www.linkedin.com/company/lyra-network_2>
<https://twitter.com/LyraNetwork>
<https://payzen.eu>
------------------------------------------------------------------------
Lyra Network, 109 rue de l'innovation, 31670 Labège,
FRANCE
_______________________________________________
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der
Universität Basel IT Services Klingelbergstr. 70 |
CH-4056 Basel | Switzerland Tel. +41 79 449 25 63
<tel:+41%2079%20449%2025%2063> | http://its.unibas.ch
<http://its.unibas.ch/> ITS-ServiceDesk:
support-...@unibas.ch <mailto:support-...@unibas.ch> |
+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der
Universität Basel IT Services Klingelbergstr. 70 |
CH-4056 Basel | Switzerland Tel. +41 79 449 25 63
<tel:+41%2079%20449%2025%2063> | http://its.unibas.ch
<http://its.unibas.ch/> ITS-ServiceDesk:
support-...@unibas.ch <mailto:support-...@unibas.ch> |
+41 61 267 14 11 <tel:+41%2061%20267%2014%2011>
_______________________________________________
Users mailing list
Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
_______________________________________________ Users
mailing list Users@ovirt.org <mailto:Users@ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
<http://lists.ovirt.org/mailman/listinfo/users>
--
*Arsène Gschwind* Fa. Sapify AG im Auftrag der Universität Basel
IT Services Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 <tel:+41%2079%20449%2025%2063> |
http://its.unibas.ch <http://its.unibas.ch/> ITS-ServiceDesk:
support-...@unibas.ch <mailto:support-...@unibas.ch> | +41 61 267
14 11 <tel:+41%2061%20267%2014%2011>
--
*Arsène Gschwind*
Fa. Sapify AG im Auftrag der Universität Basel
IT Services
Klingelbergstr. 70 | CH-4056 Basel | Switzerland
Tel. +41 79 449 25 63 | http://its.unibas.ch <http://its.unibas.ch/>
ITS-ServiceDesk: support-...@unibas.ch | +41 61 267 14 11
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users