It's FC/FcoE. This is with configuration suggested by emc/redhat
360060160a62134002818778f949de411 dm-5 DGC,VRAID size=11T features='2 queue_if_no_path retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=50 status=active | |- 1:0:1:2 sdr 65:16 active ready running | `- 2:0:1:2 sdy 65:128 active ready running `-+- policy='round-robin 0' prio=10 status=enabled |- 1:0:0:2 sdd 8:48 active ready running `- 2:0:0:2 sdk 8:160 active ready running 360060160a6213400e622de69949de411 dm-2 DGC,VRAID size=6.0T features='2 queue_if_no_path retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=50 status=active | |- 1:0:1:0 sdp 8:240 active ready running | `- 2:0:1:0 sdw 65:96 active ready running `-+- policy='round-robin 0' prio=10 status=enabled |- 1:0:0:0 sdb 8:16 active ready running `- 2:0:0:0 sdi 8:128 active ready running 360060160a6213400cce46e40949de411 dm-4 DGC,VRAID size=560G features='2 queue_if_no_path retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=50 status=active | |- 1:0:1:3 sds 65:32 active ready running | `- 2:0:1:3 sdz 65:144 active ready running `-+- policy='round-robin 0' prio=10 status=enabled |- 1:0:0:3 sde 8:64 active ready running `- 2:0:0:3 sdl 8:176 active ready running 360060160a6213400c4b39e80949de411 dm-3 DGC,VRAID size=500G features='2 queue_if_no_path retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=50 status=active | |- 1:0:1:1 sdq 65:0 active ready running | `- 2:0:1:1 sdx 65:112 active ready running `-+- policy='round-robin 0' prio=10 status=enabled |- 1:0:0:1 sdc 8:32 active ready running `- 2:0:0:1 sdj 8:144 active ready running 360060160a6213400fa2d31acbbfce511 dm-8 DGC,RAID 5 size=5.4T features='2 queue_if_no_path retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=50 status=active | |- 1:0:0:6 sdh 8:112 active ready running | `- 2:0:0:6 sdo 8:224 active ready running `-+- policy='round-robin 0' prio=10 status=enabled |- 1:0:1:6 sdv 65:80 active ready running `- 2:0:1:6 sdac 65:192 active ready running 360060160a621340040652b7582f5e511 dm-7 DGC,RAID 5 size=3.6T features='2 queue_if_no_path retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=50 status=active | |- 1:0:0:4 sdf 8:80 active ready running | `- 2:0:0:4 sdm 8:192 active ready running `-+- policy='round-robin 0' prio=10 status=enabled |- 1:0:1:4 sdt 65:48 active ready running `- 2:0:1:4 sdaa 65:160 active ready running 360060160a621340064b1034cbbfce511 dm-6 DGC,RAID 5 size=1.0T features='2 queue_if_no_path retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='round-robin 0' prio=50 status=active | |- 1:0:1:5 sdu 65:64 active ready running | `- 2:0:1:5 sdab 65:176 active ready running `-+- policy='round-robin 0' prio=10 status=enabled |- 1:0:0:5 sdg 8:96 active ready running `- 2:0:0:5 sdn 8:208 active ready running This is with ovirt default conf: 360060160a6213400848e60af82f5e511 dm-3 DGC ,RAID 5 size=3.6T features='1 retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='service-time 0' prio=50 status=active | |- 12:0:0:4 sdj 8:144 active ready running | `- 13:0:1:4 sdd 8:48 active ready running `-+- policy='service-time 0' prio=10 status=enabled |- 12:0:1:4 sdf 8:80 active ready running `- 13:0:0:4 sdh 8:112 active ready running 360060160a6213400005e425b6b10e611 dm-2 DGC ,RAID 10 size=4.2T features='1 retain_attached_hw_handler' hwhandler='1 alua' wp=rw |-+- policy='service-time 0' prio=50 status=active | |- 12:0:1:0 sde 8:64 active ready running | `- 13:0:0:0 sdg 8:96 active ready running `-+- policy='service-time 0' prio=10 status=enabled |- 13:0:1:0 sdc 8:32 active ready running `- 12:0:0:0 sdi 8:128 active ready running 2017-05-13 18:50 GMT+02:00 Juan Pablo <pablo.localh...@gmail.com>: > can you please give the output of: > multipath -ll > and > iscsiadm -m session -P3 > > JP > > 2017-05-13 6:48 GMT-03:00 Stefano Bovina <bov...@gmail.com>: > >> Hi, >> >> 2.6.32-696.1.1.el6.x86_64 >> 3.10.0-514.10.2.el7.x86_64 >> >> I tried ioping test from different group of servers using multipath, >> members of different storage group (different lun, different raid ecc), and >> everyone report latency. >> I tried the same test (ioping) on a server with powerpath instead of >> multipath, with a dedicated raid group and ioping don't report latency. >> >> >> 2017-05-13 2:00 GMT+02:00 Juan Pablo <pablo.localh...@gmail.com>: >> >>> sorry to jump in, but what kernel version are you using? had similar >>> issue with kernel 4.10/4.11 >>> >>> >>> 2017-05-12 16:36 GMT-03:00 Stefano Bovina <bov...@gmail.com>: >>> >>>> Hi, >>>> a little update: >>>> >>>> The command multipath -ll hung when executed on the host while the >>>> problem occur (nothing logged in /var/log/messages or dmesg). >>>> >>>> I tested latency with ioping: >>>> ioping /dev/6a386652-629d-4045-835b-21d2f5c104aa/metadata >>>> >>>> Usually it return "time=15.6 ms", sometimes return "time=19 s" (yes, >>>> seconds) >>>> >>>> Systems are up to date and I tried both path_checker (emc_clariion and >>>> directio), without results. >>>> (https://access.redhat.com/solutions/139193, it refers to the Rev A31 >>>> of EMC document; last is A42 and suggest emc_clariion). >>>> >>>> Any idea or suggestion? >>>> >>>> Thanks, >>>> >>>> Stefano >>>> >>>> 2017-05-08 11:56 GMT+02:00 Yaniv Kaul <yk...@redhat.com>: >>>> >>>>> >>>>> >>>>> On Mon, May 8, 2017 at 11:50 AM, Stefano Bovina <bov...@gmail.com> >>>>> wrote: >>>>> >>>>>> Yes, >>>>>> this configuration is the one suggested by EMC for EL7. >>>>>> >>>>> >>>>> https://access.redhat.com/solutions/139193 suggest that for alua, the >>>>> patch checker needs to be different. >>>>> >>>>> Anyway, it is very likely that you have storage issues - they need to >>>>> be resolved first and I believe they have little to do with oVirt at the >>>>> moment. >>>>> Y. >>>>> >>>>> >>>>>> >>>>>> By the way, >>>>>> "The parameters rr_min_io vs. rr_min_io_rq mean the same thing but >>>>>> are used for device-mapper-multipath on differing kernel versions." and >>>>>> rr_min_io_rq default value is 1, rr_min_io default value is 1000, so it >>>>>> should be fine. >>>>>> >>>>>> >>>>>> 2017-05-08 9:39 GMT+02:00 Yaniv Kaul <yk...@redhat.com>: >>>>>> >>>>>>> >>>>>>> On Sun, May 7, 2017 at 1:27 PM, Stefano Bovina <bov...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> Sense data are 0x0/0x0/0x0 >>>>>>> >>>>>>> >>>>>>> Interesting - first time I'm seeing 0/0/0. The 1st is usually 0x2 >>>>>>> (see [1]), and then the rest [2], [3] make sense. >>>>>>> >>>>>>> A google search found another user with Clarion with the exact same >>>>>>> error[4], so I'm leaning toward misconfiguration of multipathing/clarion >>>>>>> here. >>>>>>> >>>>>>> Is your multipathing configuration working well for you? >>>>>>> Are you sure it's a EL7 configuration? For example, I believe you >>>>>>> should have rr_min_io_rq and not rr_min_io . >>>>>>> Y. >>>>>>> >>>>>>> [1] http://www.t10.org/lists/2status.htm >>>>>>> [2] http://www.t10.org/lists/2sensekey.htm >>>>>>> [3] http://www.t10.org/lists/asc-num.htm >>>>>>> [4] http://www.linuxquestions.org/questions/centos-111/multi >>>>>>> path-problems-4175544908/ >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> Users mailing list >>>> Users@ovirt.org >>>> http://lists.ovirt.org/mailman/listinfo/users >>>> >>>> >>> >> >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users