Hopefully this screen capture is what you are asking for? [image: Inline image 1]
Here is: # cat /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt # Generated by VDSM version 4.17.23.2-0.el7.centos DEVICE=ovirtmgmt TYPE=Bridge DELAY=0 STP=off ONBOOT=yes IPADDR=10.3.1.7 NETMASK=255.255.255.0 GATEWAY=10.3.1.1 BOOTPROTO=none DEFROUTE=yes NM_CONTROLLED=no IPV6INIT=no HOTPLUG=no # cat /etc/sysconfig/network-scripts/ifcfg-enp2s0f0 # Generated by VDSM version 4.19.10.1-1.el7.centos DEVICE=enp2s0f0 BRIDGE=ovirtmgmt ONBOOT=yes MTU=1500 DEFROUTE=no NM_CONTROLLED=no IPV6INIT=no The version that I upgraded too: oVirt Engine Version: 4.1.1.8-1.el7.centos I dont recall the version I was on prior to the upgrade but I am sure it was at least v4. Shall I just tar everying thing in /var/log/vdsm/ ? -Alex On Wed, May 17, 2017 at 10:07 AM, Michael Burman <mbur...@redhat.com> wrote: > Ok, > > What is the exact property reported in the tooltip which is out of sync? > it should be there. > It is possible to add this property to the ifcfg-ovirtmgmt file and then > 'refresh caps' it may work. > As you created the ifcfg manually after the upgrade, maybe you missed a > property, which engine expect to see. > > - About the upgrade, it is very bad that the ifcfg-ovirtmgmt file has > gone. > What are the versions involved here? > Maybe i can try and reproduce it, to insure we don't have bug here. > > Can you provide us vdsm logs from the upgrade time? > > Dan, Yevgeny, do you have any idea maybe? > > Thanks, > > On Wed, May 17, 2017 at 6:53 PM, Alex R <ar.dig...@gmail.com> wrote: > >> Michael, >> >> The tooltip says: >> "host nework's configurations differ from DC" >> >>> It is possible that the out-of-sync is the reason for the network issue. >>> It's a real problem that your ifcfg-ovirtmgmt file was missing after >>> upgrade, could it be that it wasn't persisted and saved on the host before >>> running the upgrade? >> >> I wish I had an answer for this. It is possible? The firs line is >> commented and says: >> "# Generated by VDSM version 4.17.23.2-0.el7.centos" >> >> >> - I tried refreshing capabilites, no change. >> - It is possible to check or uncheck it. >> - this is not an option. >> I mentioned in my first email that this is a single host that is used for >> development only. That is why I ask if there is a why to perform the >> networksync via CLI, or perhaps manually? >> >> -Alex >> >> On Tue, May 16, 2017 at 11:30 PM, Michael Burman <mbur...@redhat.com> >> wrote: >> >>> Alex, >>> >>> Please tell what is the tooltip saying. What is the reason for networks >>> being out-of-sync? >>> >>> It is possible that the out-of-sync is the reason for the network issue. >>> It's a real problem that your ifcfg-ovirtmgmt file was missing after >>> upgrade, could it be that it wasn't persisted and saved on the host before >>> running the upgrade? >>> >>> - Can you please try to press the 'refresh caps' button? >>> - Does the 'save Network Configuration' button grayed out or it's >>> possible to press it? >>> - Another option is to migrate the hosted-engine VM to another host in >>> the cluster and then sync the network on the host.(as you can't sync a >>> network being used by a running VM). >>> >>> Regards, >>> >>> >>> >>> >>> >>> On Wed, May 17, 2017 at 8:42 AM, Alex R <ar.dig...@gmail.com> wrote: >>> >>>> Hi Michael, thanks for the suggestion. When I use the GUI I get the >>>> error >>>> >>>> "Error while executing action HostSetupNetworks: Network is currently >>>> being used" >>>> >>>> The network is in use by the engine, that is why I asked if there is a >>>> was to sync via the CLI. >>>> >>>> This problem happened after I did the latest upgraded and the host had >>>> lost the /etc/sysconfig/netowrk-scripts/ifcfg-ovirtmgmt file. So I >>>> recreated the file and I thought alll was well except I cannot open a from >>>> outside of the host and engine network (10.3.1.0/24). >>>> >>>> source 10.3.5.0/24 cannot open console on at the destination >>>> 10.3.1.0/24. The error I get is: >>>> >>>> "Unable to connect to the graphic server /tmp/mozilla_digger0/console.v >>>> v >>>> could not connect to 10.3.1.7:Socket I/O timed out" >>>> >>>> I have already verified that the iptables rules are open and I have >>>> verified that ASA that is between the network is not blocking by doing both >>>> a packet-tracer and reviewing the logs. >>>> >>>> I think the problem is this "out-of-sync" network issue? >>>> >>>> -Alex >>>> >>>> >>>> On Tue, May 16, 2017 at 10:12 PM, Michael Burman <mbur...@redhat.com> >>>> wrote: >>>> >>>>> Hello Alex, >>>>> >>>>> - Have you tried to sync it using the 'Sync All Networks' button in >>>>> the UI? >>>>> It's located under 'Hosts' main tab > select the host > 'Network >>>>> Interfaces' sub tab > 'Sync All Networks' button. >>>>> >>>>> - Can you please go to the 'Setup Host Networks' dialog(located under >>>>> the same path^^) and hoover on top of ovirtmgmt network? a tooltip should >>>>> pop-up and it should let you know what is the reason that the network is >>>>> being out-of-sync. Engine probably complaining about a difference between >>>>> the configuration on the host and the DC. >>>>> - How did you end up with this situation? what happened before the >>>>> network become out-of-sync? did it happened after the hosted-engine deploy >>>>> was done? >>>>> >>>>> Best regards, >>>>> >>>>> On Wed, May 17, 2017 at 12:10 AM, Alex R <ar.dig...@gmail.com> wrote: >>>>> >>>>>> No one has suggestions on how I can sync the ovirtmgmt network? Is >>>>>> more information needed? >>>>>> >>>>>> >>>>>> On May 12, 2017 10:43 AM, "Alex R" <ar.dig...@gmail.com> wrote: >>>>>> >>>>>>> Hi, >>>>>>> >>>>>>> I upgraded to the latest version (users@ovirt.org) a few weeks ago >>>>>>> and ever since then I cannot open a console unless I am on the local >>>>>>> network (10.3.1.0/24). I think it is related to the Ovirtmgmt >>>>>>> interface being "out-of-sync". >>>>>>> >>>>>>> If I try to fix it in the gui, I get an error: >>>>>>> >>>>>>> "Error while executing action HostSetupNetworks: Network is >>>>>>> currently being used" >>>>>>> >>>>>>> This is because the hosted engine in on the ovirtmgmt network. >>>>>>> >>>>>>> Is there a way I can fix this via cli? This is a single host with a >>>>>>> hosted engine. I use it for development only. >>>>>>> >>>>>>> Thank you. >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users@ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>>>> >>>>>> >>>>> >>>>> >>>>> -- >>>>> Michael Burman >>>>> RedHat Israel, RHV-M Network QE >>>>> >>>>> Mobile: 054-5355725 >>>>> IRC: mburman >>>>> >>>> >>>> >>> >>> >>> -- >>> Michael Burman >>> RedHat Israel, RHV-M Network QE >>> >>> Mobile: 054-5355725 >>> IRC: mburman >>> >> >> > > > -- > Michael Burman > RedHat Israel, RHV-M Network QE > > Mobile: 054-5355725 > IRC: mburman >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users