On Thu, May 18, 2017 at 3:20 PM, Mike DePaulo <mikedep...@gmail.com> wrote:
> Well, I tried both of the following: > 1. Having only a boot partition and a PV for the OS that does not take > up the entire disk, and then specifying "sda" in Hosted Engine Setup. > 2. Having not only a boot partition and a PV for the OS, but also an > empty (and not formatted) /dev/sda3 PV that I created with fdisk. > Then, specfying "sda3" in Hosted Engine Setup. > > Both attempts resulted in errors like this: > failed: [centerpoint.ad.depaulo.org] (item=/dev/sda3) => {"failed": > true, "failed_when_result": true, "item": "/dev/sda3", "msg": " > Device /dev/sda3 not found (or ignored by filtering).\n", "rc": 5} > Can you provide gdeploy logs? I think, it's at ~/.gdeploy/gdeploy.log > > It seems like having gluster bricks on the same disk as the OS doesn't > work at all. > > I am going to buy separate OS SSDs. > > -Mike > > On Tue, May 9, 2017 at 6:22 AM, Mike DePaulo <mikedep...@gmail.com> wrote: > > On Mon, May 8, 2017 at 9:00 AM, knarra <kna...@redhat.com> wrote: > >> On 05/07/2017 04:48 PM, Mike DePaulo wrote: > >>> > >>> Hi. I am trying to follow this guide. Is it possible to use part of my > >>> OS disk /dev/sda for the bricks? > >>> > >>> https://www.ovirt.org/blog/2017/04/up-and-running-with- > ovirt-4-1-and-gluster-storage/ > >>> > >>> I am using oVirt Node 4.1.1.1. I am aware of the manual partitioning > >>> requirements. I am guessing I have to create an LV for the OS that > >>> does not take up the entire disk during install, manually create a pv > >>> like /dev/sda3 afterwards, and then run Hosted Engine Setup and > >>> specify /sda3 rather than sdb? > >>> > >>> Thanks, > >>> -Mike > >>> _______________________________________________ > >>> Users mailing list > >>> Users@ovirt.org > >>> http://lists.ovirt.org/mailman/listinfo/users > >> > >> > >> Hi Mike, > >> > >> If you create gluster bricks on the same disk as OS it works but we > do > >> not recommend setting up gluster bricks on the same disk as the os. When > >> user tries to create a gluster volume using by specifying the bricks > from > >> root partition it displays an error message "Bricks in root parition not > >> recommended and use force at the end to create volume". > >> > >> Thanks > >> > >> kasturi > >> > > > > Thank you very much. Is my process for doing this (listed in my > > original email) correct though? > > > > -Mike > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users