Hi,
We recently upgraded vdsm on a host using the webadmin. After activating
it, it kept failing so we tried to activate it back via 'systemctl start
vdsmd'.
# systemctl start vdsmd
Job for vdsmd.service failed because the control process exited with
error code. See "systemctl status vdsmd.service" and "journalctl -xe"
for details.
Having a look at the status of the process I see:
# systemctl status vdsmd
● vdsmd.service - Virtual Desktop Server Manager
Loaded: loaded (/usr/lib/systemd/system/vdsmd.service; enabled;
vendor preset: enabled)
Active: failed (Result: start-limit) since vie 2017-05-26 11:02:41
WEST; 14s ago
Process: 25018 ExecStartPre=/usr/libexec/vdsm/vdsmd_init_common.sh
--pre-start (code=exited, status=1/FAILURE)
may 26 11:02:40 systemd[1]: Failed to start Virtual Desktop Server
Manager.
may 26 11:02:40 systemd[1]: Unit vdsmd.service entered failed state.
may 26 11:02:40 systemd[1]: vdsmd.service failed.
may 26 11:02:41 systemd[1]: vdsmd.service holdoff time over, scheduling
restart.
may 26 11:02:41 systemd[1]: start request repeated too quickly for
vdsmd.service
may 26 11:02:41 systemd[1]: Failed to start Virtual Desktop Server
Manager.
may 26 11:02:41 systemd[1]: Unit vdsmd.service entered failed state.
may 26 11:02:41 systemd[1]: vdsmd.service failed.
To check what happened I run the vdsm_init_common.sh script by myself
and saw:
# /usr/libexec/vdsm/vdsmd_init_common.sh --pre-start
vdsm: Running mkdirs
vdsm: Running configure_coredump
vdsm: Running configure_vdsm_logs
vdsm: Running wait_for_network
vdsm: Running run_init_hooks
vdsm: Running upgraded_version_check
vdsm: Running check_is_configured
Current revision of multipath.conf detected, preserving
lvm is configured for vdsm
libvirt is not configured for vdsm yet
Modules sebool, passwd, libvirt are not configured
Error:
One of the modules is not configured to work with VDSM.
To configure the module use the following:
'vdsm-tool configure [--module module-name]'.
If all modules are not configured try to use:
'vdsm-tool configure --force'
(The force flag will stop the module's service and start it
afterwards automatically to load the new configuration.)
vdsm: stopped during execute check_is_configured task (task returned
with error code 1).
-----
I run the 'vdsm-tool configure --force' command, it ends successfully
and after that I can start the vdsmd process. But... after a while it
fails again and I need to re-run the same command all the time.
Is this a known bug? any temporary workaround?
Versions:
vdsm-4.19.15-1.el7.centos.x86_64
libvirt-2.0.0-10.el7_3.5.x86_64
Thanks.
Regards.
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
