Hi,
Can you put some numbers ? what tests are you doing ? Im running oVirt with Gluster without performance issues, but im running replica 2 all SSDs. Gluster logs might help too. -- Respectfully Mahdi A. Mahdi ________________________________ From: [email protected] <[email protected]> on behalf of Chris Boot <[email protected]> Sent: Monday, June 19, 2017 5:46:08 PM To: oVirt users Subject: [ovirt-users] Very poor GlusterFS performance Hi folks, I have 3x servers in a "hyper-converged" oVirt 4.1.2 + GlusterFS 3.10 configuration. My VMs run off a replica 3 arbiter 1 volume comprised of 6 bricks, which themselves live on two SSDs in each of the servers (one brick per SSD). The bricks are XFS on LVM thin volumes straight onto the SSDs. Connectivity is 10G Ethernet. Performance within the VMs is pretty terrible. I experience very low throughput and random IO is really bad: it feels like a latency issue. On my oVirt nodes the SSDs are not generally very busy. The 10G network seems to run without errors (iperf3 gives bandwidth measurements of >= 9.20 Gbits/sec between the three servers). To put this into perspective: I was getting better behaviour from NFS4 on a gigabit connection than I am with GlusterFS on 10G: that doesn't feel right at all. My volume configuration looks like this: Volume Name: vmssd Type: Distributed-Replicate Volume ID: d5a5ddd1-a140-4e0d-b514-701cfe464853 Status: Started Snapshot Count: 0 Number of Bricks: 2 x (2 + 1) = 6 Transport-type: tcp Bricks: Brick1: ovirt3:/gluster/ssd0_vmssd/brick Brick2: ovirt1:/gluster/ssd0_vmssd/brick Brick3: ovirt2:/gluster/ssd0_vmssd/brick (arbiter) Brick4: ovirt3:/gluster/ssd1_vmssd/brick Brick5: ovirt1:/gluster/ssd1_vmssd/brick Brick6: ovirt2:/gluster/ssd1_vmssd/brick (arbiter) Options Reconfigured: nfs.disable: on transport.address-family: inet6 performance.quick-read: off performance.read-ahead: off performance.io-cache: off performance.stat-prefetch: off performance.low-prio-threads: 32 network.remote-dio: off cluster.eager-lock: enable cluster.quorum-type: auto cluster.server-quorum-type: server cluster.data-self-heal-algorithm: full cluster.locking-scheme: granular cluster.shd-max-threads: 8 cluster.shd-wait-qlength: 10000 features.shard: on user.cifs: off storage.owner-uid: 36 storage.owner-gid: 36 features.shard-block-size: 128MB performance.strict-o-direct: on network.ping-timeout: 30 cluster.granular-entry-heal: enable I would really appreciate some guidance on this to try to improve things because at this rate I will need to reconsider using GlusterFS altogether. Cheers, Chris -- Chris Boot [email protected] _______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________ Users mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/users
