One more thing is - firewall rules. For 3 gluster bricks I have configured following: firewall-cmd --zone=public --add-port=24007-24009/tcp --add-port=49152-49664/tcp --permanent
and this seems not enough. have to stop the firewall in order to make the cluster working. I have noticed 490xx being used by gluster, any ideas on that documented range? lsof -i | grep gluster | grep "490" glusterfs 32301 root 10u IPv4 148985 0t0 TCP ovirt1:49159->ovirt1:49099 (ESTABLISHED) glusterfs 32301 root 17u IPv4 153084 0t0 TCP ovirt1:49159->ovirt2:49096 (ESTABLISHED) glusterfs 46346 root 17u IPv4 156437 0t0 TCP ovirt1:49161->ovirt1:49093 (ESTABLISHED) glusterfs 46346 root 18u IPv4 149985 0t0 TCP ovirt1:49161->ovirt2:49090 (ESTABLISHED) glusterfs 46380 root 8u IPv4 151389 0t0 TCP ovirt1:49090->ovirt3:49161 (ESTABLISHED) glusterfs 46380 root 11u IPv4 148986 0t0 TCP ovirt1:49091->ovirt2:49161 (ESTABLISHED) glusterfs 46380 root 21u IPv4 153074 0t0 TCP ovirt1:49099->ovirt1:49159 (ESTABLISHED) glusterfs 46380 root 25u IPv4 153075 0t0 TCP ovirt1:49097->ovirt2:49160 (ESTABLISHED) glusterfs 46380 root 26u IPv4 153076 0t0 TCP ovirt1:49095->ovirt3:49159 (ESTABLISHED) glusterfs 46380 root 27u IPv4 153077 0t0 TCP ovirt1:49093->ovirt1:49161 (ESTABLISHED) Regards, Artem On Thu, Nov 9, 2017 at 3:56 PM, Artem Tambovskiy <artem.tambovs...@gmail.com > wrote: > Hi, > > Just realized that I probably went in the wrong way. Reinstalled > everything from the scratch added 4 volumes (hosted_engine, data, export, > iso). All looks good so far. > But if go to the Cluster properties and tick the checkbox "Enable Cluster > Service" - the host will be marked as Non-Operational. Am I messing up the > things? > Or I'm just fine as long as I already have a Data (Master) Storage Domain > over GlusterFS? > > Regards, > Artem > > On Thu, Nov 9, 2017 at 2:46 PM, Fred Rolland <froll...@redhat.com> wrote: > >> Hi, >> >> The steps for this kind of setup are described in [1]. >> However it seems you have already succeeded in installing, so maybe you >> need some additional steps [2] >> Did you add a storage domain that will act as Master Domain? It is >> needed, then the initial Storage Domain should be imported automatically. >> >> >> [1] https://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt >> -4.1-and-gluster-storage/ >> [2] https://www.ovirt.org/documentation/gluster-hyperconverged/ >> chap-Additional_Steps/ >> >> On Thu, Nov 9, 2017 at 10:50 AM, Artem Tambovskiy < >> artem.tambovs...@gmail.com> wrote: >> >>> Another yet attempt to get a help on hosted-engine deployment with >>> glusterfs cluster. >>> I already spend a day trying to get bring such a setup to work with no >>> luck. >>> >>> The hosted engine being successfully deployed but I can't activate the >>> host, the storage domain for the host is missing and I can't even add it. >>> So either something went wrong during deployment or my glusterfs cluster >>> doesn't configured properly. >>> >>> That are the prerequisites for this? >>> >>> - glusterfs cluster of 3 nodes with replica 3 volume >>> - Any specific volume configs? >>> - how many volumes should I prepare for hosted engine deployment? >>> >>> Any other thoughts? >>> >>> Regards, >>> Artem >>> >>> _______________________________________________ >>> Users mailing list >>> Users@ovirt.org >>> http://lists.ovirt.org/mailman/listinfo/users >>> >>> >> >
_______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users