Hi there,
does anyone have an idea how to decrease a virtual machine's downtime?
Best
Daniel
On 06.04.2018 13:34, Daniel Menzel wrote:
Hi Michal,
(sorry for misspelling your name in my first mail).
The settings for the VMs are the following (oVirt 4.2):
1. HA checkbox enabled of course
2. "Target Storage Domain for VM Lease" -> left empty
3. "Resume Behavior" -> AUTO_RESUME
4. Priority for Migration -> High
5. "Watchdog Model" -> No-Watchdog
For testing we did not kill any VM but the host. So basically we
simulated an instantaneous crash by manually turning the machine off
via IPMI-Interface (not via operating system!) and ping the guest(s).
What happens then?
1. 2-3 seconds after the we press the host's shutdown button we lose
ping contact to the VM(s).
2. After another 20s oVirt changes the host's status to "connecting",
the VM's status is set to a question mark.
3. After ~1:30 the host is flagged to "non responsive"
4. After ~2:10 the host's reboot is initiated by oVirt, 5-10s later
the guest is back online.
So, there seems to be one mistake I made in the first mail: The
downtime is "only" 2.5min. But still I think this time can be
decreased as for some services it is still quite a long time.
Best
Daniel
On 06.04.2018 12:49, Michal Skrivanek wrote:
On 6 Apr 2018, at 12:45, Daniel Menzel<daniel.men...@hhi.fraunhofer.de> wrote:
Hi Michael,
thanks for your mail. Sorry, I forgot to write that. Yes, we have power
management and fencing enabled on all hosts. We also tested this and found out
that it works perfectly. So this cannot be the reason I guess.
Hi Daniel,
ok, then it’s worth looking into details. Can you describe in more detail what
happens? What exact settings you’re using for such VM? Are you killing the HE
VM or other VMs or both? Would be good to narrow it down a bit and then review
the exact flow
Thanks,
michal
Daniel
On 06.04.2018 11:11, Michal Skrivanek wrote:
On 4 Apr 2018, at 15:36, Daniel Menzel<daniel.men...@hhi.fraunhofer.de> wrote:
Hello,
we're successfully using a setup with 4 Nodes and a replicated Gluster for
storage. The engine is self hosted. What we're dealing with at the moment is
the high availability: If a node fails (for example simulated by a forced power
loss) the engine comes back up online withing ~2min. But guests (having the HA
option enabled) come back online only after a very long grace time of ~5min. As
we have a reliable network (40 GbE) and reliable servers I think that the
default grace times are way too high for us - is there any possibility to
change those values?
And do you have Power Management(iLO, iDRAC,etc) configured for your hosts?
Otherwise we have to resort to relatively long timeouts to make sure the host
is really dead
Thanks,
michal
Thanks in advance!
Daniel
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
