Dear Martin, thanks, ok, good to know. We have a hosted engine that was created on ovirt 3.x and after that has only been updated. Maybe this is the cause. Thanks for your help again.
Best regards, Thomas > Hi, > > the vnc device is there by default (I copied it out of my own hosted > engine instance), I do not know why it was missing in your case. > > Best regards > > Martin Sivak > > On Fri, Apr 13, 2018 at 5:13 PM, Thomas Klute <kl...@ingenit.com> wrote: >> Dear Martin, >> >> yes, that worked. Thank you so much!! >> We were able to see that the latest kernel update failed and did not >> create the initramfs file and thus the boot process failed with a kernel >> panic. >> >> Debugging this problem took us many hours... It felt so complicated to >> connect a vnc to this vm - compared to a bare metal setup with display >> and keyboard. >> Wouldn't it be a good idea to have the vnc device in the config by default? >> >> Best regards, >> Thomas >> >>> You need to be in global maintenance, but I think you already know that. >>> Then try updating the vm.conf like you already did and add this line: >>> >>> devices={device:vnc,type:graphics,deviceId:f1d0394e-b077-4ea6-99e5-b9b6b8fe073c,address:None} >>> >>> Then restart the VM using hosted-engine commands and try the VNC approach >>> again. >>> >>> Best regards >>> >>> Martin Sivak >>> >>> On Fri, Apr 13, 2018 at 2:35 PM, Thomas Klute <kl...@ingenit.com> wrote: >>>> Dear Martin, >>>> >>>> thanks for the feedback. >>>> We already read this and tried it. >>>> It seems to me that the graphics device was removed from the hosted >>>> engine by some ovirt release. >>>> >>>> If I try to set a console password I see this message: >>>> >>>> hosted-engine --add-console-password >>>> Enter password: >>>> no graphics devices configured >>>> >>>> Furthermore, there is nothing listening on port 5900 after that. >>>> The HostedEngine qemu process shows a " -display none " as parameter and >>>> I have no idea where this can be changed. >>>> >>>> I already created a /var/run/ovirt-hosted-engine-ha/vm-custom.conf >>>> containing: >>>> display=vnc >>>> kvmEnable=true >>>> >>>> But nothing changed. >>>> I also edited the HostedEngine VM config using virsh and added a vnc >>>> display: >>>> /usr/bin/virsh -c >>>> qemu:///system?authfile=/etc/ovirt-hosted-engine/virsh_auth.conf edit >>>> HostedEngine >>>> >>>> <graphics type='vnc' port='12355' autoport='no' listen='0.0.0.0'> >>>> <listen type='address' address='0.0.0.0'/> >>>> </graphics> >>>> <video> >>>> <model type='qxl' ram='65536' vram='65536' vgamem='16384' >>>> heads='1' primary='yes'/> >>>> <address type='pci' domain='0x0000' bus='0x00' slot='0x07' >>>> function='0x0'/> >>>> </video> >>>> >>>> But there is still "display none" passed as command line parameter to >>>> qemu and thus, I suppose, there's no display. >>>> >>>> Any help is appreciated, thanks, >>>> Thomas >>>> >>>> >>>>> Hi, >>>>> >>>>> the serial console will show output if the kernel knows to use it. >>>>> >>>>> The VNC approach is also possible and I believe we already have a >>>>> graphical device present. What you are looking for is probably this >>>>> (VNC method is described there): >>>>> https://www.ovirt.org/documentation/how-to/hosted-engine/#handle-engine-vm-boot-problems >>>>> >>>>> Best regards >>>>> >>>>> -- >>>>> Martin Sivak >>>>> SLA / oVirt >>>>> >>>>> On Fri, Apr 13, 2018 at 11:26 AM, Thomas Klute <kl...@ingenit.com> wrote: >>>>>> Dear oVirt Team, >>>>>> >>>>>> after trying to reboot a hosted engine setup on oVirt 4.2 the VM won't >>>>>> come up anymore. >>>>>> The qemu-kvm process is there but we're unable to access the VM using >>>>>> - the serial console (simply does not show anything, does not react to >>>>>> characters typed) >>>>>> - VNC / Spice because the hosted engine vm.conf does not contain any >>>>>> graphics device. >>>>>> >>>>>> Before trying to reinstall, we'd like to recover and debug what is going >>>>>> on. >>>>>> We mounted a Centos7 install .iso and started the VM using >>>>>> hosted-engine --vm-start >>>>>> --vm-conf=/var/run/ovirt-hosted-engine-ha/vm-custom.conf >>>>>> But we still have to problem, that the serial console does not show >>>>>> anything and there is no way to connect using VNC. >>>>>> >>>>>> So, what is the recommended way to move forward in such situation? >>>>>> IMHO the classical way would be to add a graphics device and connect via >>>>>> VNC? >>>>>> I did not use the serial console much, up to now. Should the serial >>>>>> console show any output during boot? >>>>>> >>>>>> Thanks for your help, >>>>>> Thomas >>>>>> >>>>>> -- >>>>>> ________________________________________________________________________ >>>>>> >>>>>> Dipl.-Inform. Thomas Klute kl...@ingenit.com >>>>>> Geschäftsführer / CEO >>>>>> ---------------------------------------------------------------------- >>>>>> ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120 >>>>>> Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121 >>>>>> D-44227 Dortmund www.ingenit.com >>>>>> >>>>>> Registergericht: Amtsgericht Dortmund, HRA 13 914 >>>>>> Gesellschafter : Thomas Klute, Marc-Christian Schröer >>>>>> ________________________________________________________________________ >>>>>> >>>>>> _______________________________________________ >>>>>> Users mailing list >>>>>> Users@ovirt.org >>>>>> http://lists.ovirt.org/mailman/listinfo/users >>>> Sollten noch Fragen offen sein, stehen wir Ihnen natürlich jederzeit >>>> gerne zur Verfügung. >>>> >>>> Mit Grüßen aus Dortmund, >>>> Thomas Klute >>>> >>>> -- >>>> ________________________________________________________________________ >>>> >>>> Dipl.-Inform. Thomas Klute kl...@ingenit.com >>>> Geschäftsführer / CEO >>>> ---------------------------------------------------------------------- >>>> ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120 >>>> Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121 >>>> D-44227 Dortmund www.ingenit.com >>>> >>>> Registergericht: Amtsgericht Dortmund, HRA 13 914 >>>> Gesellschafter : Thomas Klute, Marc-Christian Schröer >>>> ________________________________________________________________________ >>>> >> Sollten noch Fragen offen sein, stehen wir Ihnen natürlich jederzeit >> gerne zur Verfügung. >> >> Mit Grüßen aus Dortmund, >> Thomas Klute >> >> -- >> ________________________________________________________________________ >> >> Dipl.-Inform. Thomas Klute kl...@ingenit.com >> Geschäftsführer / CEO >> ---------------------------------------------------------------------- >> ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120 >> Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121 >> D-44227 Dortmund www.ingenit.com >> >> Registergericht: Amtsgericht Dortmund, HRA 13 914 >> Gesellschafter : Thomas Klute, Marc-Christian Schröer >> ________________________________________________________________________ >> > Sollten noch Fragen offen sein, stehen wir Ihnen natürlich jederzeit gerne zur Verfügung. Mit Grüßen aus Dortmund, Thomas Klute -- ________________________________________________________________________ Dipl.-Inform. Thomas Klute kl...@ingenit.com Geschäftsführer / CEO ---------------------------------------------------------------------- ingenit GmbH & Co. KG Tel. +49 (0)231 58 698-120 Emil-Figge-Strasse 76-80 Fax. +49 (0)231 58 698-121 D-44227 Dortmund www.ingenit.com Registergericht: Amtsgericht Dortmund, HRA 13 914 Gesellschafter : Thomas Klute, Marc-Christian Schröer ________________________________________________________________________ _______________________________________________ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users