Hi Marcin,

Here is ip addr output from virtual machines:

[root@testi2 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:1a:4a:16:01:05 brd ff:ff:ff:ff:ff:ff
    inet 10.0.1.25/24 brd 10.0.1.255 scope global dynamic eth0
       valid_lft 86331sec preferred_lft 86331sec
    inet6 fe80::21a:4aff:fe16:105/64 scope link
       valid_lft forever preferred_lft forever
3: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:1a:4a:16:01:03 brd ff:ff:ff:ff:ff:ff
    inet 10.0.200.10/24 brd 10.0.200.255 scope global dynamic eth2
       valid_lft 86334sec preferred_lft 86334sec
    inet6 fe80::21a:4aff:fe16:103/64 scope link
       valid_lft forever preferred_lft forever

eth0 connected to network ovirtmgmt
eth2 connected to OVN network vm-public

[root@testi6 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:1a:4a:16:01:0b brd ff:ff:ff:ff:ff:ff
    inet 10.0.1.27/24 brd 10.0.1.255 scope global dynamic eth0
       valid_lft 86187sec preferred_lft 86187sec
    inet6 fe80::21a:4aff:fe16:10b/64 scope link
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:1a:4a:16:01:0c brd ff:ff:ff:ff:ff:ff
    inet 10.0.200.11/24 brd 10.0.200.255 scope global dynamic eth1
       valid_lft 86301sec preferred_lft 86301sec
    inet6 fe80::21a:4aff:fe16:10c/64 scope link
       valid_lft forever preferred_lft forever

eth0 connected to network ovirtmgmt
eth1 connected to OVN network vm-public

Best regards,
Samuli


Marcin Mirecki kirjoitti 08.05.2018 10:14:
Hi Samuli,

Your configuration looks correct.
Can you also send me the result of 'ip addr' on your vm's?

Thanks,
Marcin

On Mon, May 7, 2018 at 7:44 PM, Samuli Heinonen
<samp...@neutraali.net> wrote:

Hi Marcin,

Thank you for your response.

I used engine-setup to do the configuration. Only exception is that
I had to run "vdsm-tool ovn-config engine-ip local-ip" (ie.
vdsm-tool ovn-config 10.0.1.101 10.0.1.21) on hypervisors.

Here is the output of requested commands:

[root@oe ~]# ovn-sbctl show
Chassis "049183d5-61b6-4b9c-bae3-c7b10d30f8cb"
hostname: "o2.hirundinidae.local"
Encap geneve
ip: "10.0.1.18"
options: {csum="true"}
Port_Binding "87c5e44a-7c8b-41b2-89a6-fa52f27643ed"
Chassis "972f1b7b-10de-4e4f-a5f9-f080890f087d"
hostname: "o3.hirundinidae.local"
Encap geneve
ip: "10.0.1.21"
options: {csum="true"}
Port_Binding "ccea5185-3efa-4d9c-9475-9e46009fea4f"
Port_Binding "e868219c-f16c-45c6-b7b1-72d044fee602"

[root@oe ~]# ovn-nbctl show
switch 7d264a6c-ea48-4a6d-9663-5244102dc9bb (vm-private)
port 4ec3ecf6-d04a-406c-8354-c5e195ffde05
addresses: ["00:1a:4a:16:01:06 dynamic"]
switch 40aedb7d-b1c3-400e-9ddb-16bee3bb312a (vm-public)
port 87c5e44a-7c8b-41b2-89a6-fa52f27643ed
addresses: ["00:1a:4a:16:01:03"]
port ccea5185-3efa-4d9c-9475-9e46009fea4f
addresses: ["00:1a:4a:16:01:0c"]
port e868219c-f16c-45c6-b7b1-72d044fee602
addresses: ["00:1a:4a:16:01:0a"]

[root@o2 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 [1] scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovirtmgmt state UP qlen 1000
link/ether 78:f2:9e:90:bc:64 brd ff:ff:ff:ff:ff:ff
3: enp0s20f0u5c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master public state UNKNOWN qlen 1000
link/ether 50:3e:aa:4c:9b:01 brd ff:ff:ff:ff:ff:ff
4: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
qlen 1000
link/ether 82:49:e1:15:af:56 brd ff:ff:ff:ff:ff:ff
5: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen
1000
link/ether a2:bb:78:7e:35:4b brd ff:ff:ff:ff:ff:ff
21: public: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP qlen 1000
link/ether 50:3e:aa:4c:9b:01 brd ff:ff:ff:ff:ff:ff
inet6 fe80::523e:aaff:fe4c:9b01/64 scope link
valid_lft forever preferred_lft forever
22: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP qlen 1000
link/ether 78:f2:9e:90:bc:64 brd ff:ff:ff:ff:ff:ff
inet 10.0.1.18/24 [2] brd 10.0.1.255 scope global ovirtmgmt
valid_lft forever preferred_lft forever
inet6 fe80::7af2:9eff:fe90:bc64/64 scope link
valid_lft forever preferred_lft forever
23: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000
qdisc noqueue master ovs-system state UNKNOWN qlen 1000
link/ether 02:c0:7a:e3:4e:76 brd ff:ff:ff:ff:ff:ff
inet6 fe80::c0:7aff:fee3:4e76/64 scope link
valid_lft forever preferred_lft forever
24: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state
DOWN qlen 1000
link/ether a2:2f:f2:58:88:da brd ff:ff:ff:ff:ff:ff
26: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovs-system state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:03 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:103/64 scope link
valid_lft forever preferred_lft forever
29: vnet1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovirtmgmt state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:05 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:105/64 scope link
valid_lft forever preferred_lft forever

[root@o2 ~]# ovs-vsctl show
6be6d37c-74cf-485e-9957-f8eb4bddb2ca
Bridge br-int
fail_mode: secure
Port br-int
Interface br-int
type: internal
Port "ovn-972f1b-0"
Interface "ovn-972f1b-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.0.1.21"}
Port "vnet0"
Interface "vnet0"
ovs_version: "2.9.0"

[root@o3 ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 [1] scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp0s31f6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovirtmgmt state UP qlen 1000
link/ether 78:f2:9e:90:bc:50 brd ff:ff:ff:ff:ff:ff
3: enp0s20f0u5c2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master public state UNKNOWN qlen 1000
link/ether 50:3e:aa:4c:9c:03 brd ff:ff:ff:ff:ff:ff
4: ovs-system: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
qlen 1000
link/ether 7e:43:c1:b0:48:73 brd ff:ff:ff:ff:ff:ff
5: br-int: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen
1000
link/ether 3a:fe:68:34:31:4c brd ff:ff:ff:ff:ff:ff
21: public: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
state UP qlen 1000
link/ether 50:3e:aa:4c:9c:03 brd ff:ff:ff:ff:ff:ff
inet6 fe80::523e:aaff:fe4c:9c03/64 scope link
valid_lft forever preferred_lft forever
22: ovirtmgmt: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP qlen 1000
link/ether 78:f2:9e:90:bc:50 brd ff:ff:ff:ff:ff:ff
inet 10.0.1.21/24 [3] brd 10.0.1.255 scope global ovirtmgmt
valid_lft forever preferred_lft forever
inet6 fe80::7af2:9eff:fe90:bc50/64 scope link
valid_lft forever preferred_lft forever
24: ;vdsmdummy;: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state
DOWN qlen 1000
link/ether 02:92:3f:89:f2:c7 brd ff:ff:ff:ff:ff:ff
25: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovirtmgmt state UNKNOWN qlen 1000
link/ether fe:16:3e:0b:b1:2d brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc16:3eff:fe0b:b12d/64 scope link
valid_lft forever preferred_lft forever
27: vnet2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovirtmgmt state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:0b brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:10b/64 scope link
valid_lft forever preferred_lft forever
29: vnet4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovs-system state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:0c brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:10c/64 scope link
valid_lft forever preferred_lft forever
31: vnet6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovirtmgmt state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:07 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:107/64 scope link
valid_lft forever preferred_lft forever
32: vnet7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master public state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:09 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:109/64 scope link
valid_lft forever preferred_lft forever
33: vnet8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
pfifo_fast master ovs-system state UNKNOWN qlen 1000
link/ether fe:1a:4a:16:01:0a brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc1a:4aff:fe16:10a/64 scope link
valid_lft forever preferred_lft forever
34: genev_sys_6081: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 65000
qdisc noqueue master ovs-system state UNKNOWN qlen 1000
link/ether 46:88:1c:22:6f:c3 brd ff:ff:ff:ff:ff:ff
inet6 fe80::4488:1cff:fe22:6fc3/64 scope link
valid_lft forever preferred_lft forever

[root@o3 ~]# ovs-vsctl show
8c2c19fc-d9e4-423d-afcb-f5ecff602ca7
Bridge br-int
fail_mode: secure
Port "vnet4"
Interface "vnet4"
Port "ovn-049183-0"
Interface "ovn-049183-0"
type: geneve
options: {csum="true", key=flow,
remote_ip="10.0.1.18"}
Port "vnet8"
Interface "vnet8"
Port br-int
Interface br-int
type: internal
ovs_version: "2.9.0"

Best regards,
Samuli

Marcin Mirecki wrote:

Hi Samuli,

Let's first make sure the configuration is correct.
How did you configure the env? Did you use the automatic
engine-setup
configuration?

Can you please send me the output of the following:

on engine:
ovn-sbctl show
ovn-nbctl show

on hosts:
ip addr
ovs-vsctl show

The 'vdsm-tool ovn-config' command configures the ovn controller to
use the
first ip as the ovn central, and the local tunnel to use the second
one.

Regards,
Marcin

On Sun, May 6, 2018 at 10:42 AM, Samuli
Heinonen<samp...@neutraali.net>
wrote:

Hi all,

I'm building a home lab using oVirt+GlusterFS in hyperconverged(ish)
setup.

My setup consists of 2x nodes with ASRock H110M-STX motherboard,
Intel
Pentium G4560 3,5 GHz CPU and 16 GB RAM. Motherboard has integrated
Intel
Gigabit I219V LAN. At the moment I'm using RaspberryPi as Gluster
arbiter
node. Nodes are connected to basic "desktop switch" without any
management
available.

Hardware is nowhere near perfect, but it get its job done and is
enough
for playing around. However I'm having problems getting OVN to work
properly and I'm clueless where to look next.

oVirt is setup like this:
oVirt engine host oe / 10.0.1.101
oVirt hypervisor host o2 / 10.0.1.18
oVirt hypervisor host o3 / 10.0.1.21
OVN network 10.0.200.0/24 [4]

When I spin up a VM in o2 and o3 with IP address in network
10.0.1.0/24 [5]
everything works fine. VMs can interact between each other without
any
problems.

Problems show up when I try to use OVN based network between virtual
machines. If virtual machines are on same hypervisor then everything
seems
to work ok. But if I have virtual machine on hypervisor o2 and
another one
on hypervisor o3 then TCP connections doesn't work very well. UDP
seems to
be ok and it's possible to ping hosts, do dns&  ntp queries and so
on.

Problem with TCP is that for example when taking SSH connection to
another
host at some point connection just hangs and most of the time it's
not even
possible to even log in before connectiong hangs. If I look into
tcpdump at
that point it looks like packets never reach destination. Also, if I
have
multiple connections, then all of them hang at the same time.

I have tried switching off tx checksum and other similar settings,
but it
didn't make any difference.

I'm suspecting that hardware is not good enough. Before
investigating into
new hardware I'd like to get some confirmation that everything is
setup
correctly.

When setting up oVirt/OVN I had to run following undocumented
command to
get it working at all: vdsm-tool ovn-config 10.0.1.101 10.0.1.21
(oVirt
engine IP, hypervisor IP). Especially this makes me think that I
have
missed some crucial part in configuration.

On oVirt engine in /var/log/openvswitch/ovsdb-server-nb.log there
are
error messages:
2018-05-06T08:30:05.418Z|00913|stream_ssl|WARN|SSL_read: unexpected
SSL
connection close
2018-05-06T08:30:05.418Z|00914|jsonrpc|WARN|ssl:127.0.0.1:53152 [6]:
receive
error: Protocol error
2018-05-06T08:30:05.419Z|00915|reconnect|WARN|ssl:127.0.0.1:53152
[6]:
connection dropped (Protocol error)

To be honest, I'm not sure what's causing those error messages or
are they
related. I found out some bug reports stating that they are not
critical.

Any ideas what to do next or should I just get better hardware? :)

Best regards,
Samuli Heinonen
_______________________________________________
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users [7]



Links:
------
[1] http://127.0.0.1/8
[2] http://10.0.1.18/24
[3] http://10.0.1.21/24
[4] http://10.0.200.0/24
[5] http://10.0.1.0/24
[6] http://127.0.0.1:53152
[7] http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org

Reply via email to