On Mon, May 7, 2018 at 7:50 AM, Justin Zygmont <jzygm...@proofpoint.com> wrote:
> Thanks for the reply, > > > > Ok I see what you’re saying, its just confusing because there are several > places that mention the gateways and none of them are clear on what they’re > doing. > > For example, under Cluster > Networks > Manage Networks, default route is > only selectable for 1 network, yet in each network you create there is > still the option of choosing a IP address and gateway. > On the host there are multiple routing tables, the default main one contains the default route of the host. Each defined network also maintains its own routing table, for traffic that it generated or is destined to it (in case the network has an IP). So these are not the same things. > > > Even if I don’t put in any IP or gateway for a tagged vlan, it still > depends of the management gateway to forward to the router. I thought I > should be able to lose the management network and still have all the tagged > vlans working? > Setting an IP on a network is useful if you need the *host* to communicate with some remote on an IP level. If you need VM communication, then an IP on a host network is not needed. The vnics are connected through a bridge, not through a router. So traffic from a VM is not passing through the L3 stack of the host and its routing entries on the host do not effect that traffic. > > > > > > *From:* Edward Haas [mailto:eh...@redhat.com] > *Sent:* Sunday, May 6, 2018 7:34 AM > *To:* Justin Zygmont <jzygm...@proofpoint.com> > *Cc:* users@ovirt.org > *Subject:* Re: [ovirt-users] routing > > > > Not sure if I understand what you are asking here, but the need for a > gateway per network has emerged from the need to support other host > networks (not VM networks) beside the management one. > > As an example, migration and storage networks can be defined, each passing > dedicated traffic (one for storage communication and another for VM > migration traffic), they may need to pass through different gateways. > > So the management network can be accessed using gateway A, storage using B > and migration using C. A will usually be set on a host level as the host > default gateway, and the others will be set for the individual networks. > > Otherwise, how would you expect storage to use a different router (than > the management one) in the network? > > Thanks, > > Edy. > > > > On Thu, May 3, 2018 at 1:08 AM, Justin Zygmont <jzygm...@proofpoint.com> > wrote: > > I don’t understand why you would want this unless the ovirtnode itself was > actually the router, wouldn’t you want to only have an IP on the management > network, and leave the rest of the VLANS blank so they depend on the router > to route the traffic: > > > > NIC1 -> ovirt-mgmt - gateway set > > NIC2 -> VLAN3, VLAN4, etc… > > > > > > https://www.ovirt.org/documentation/admin-guide/chap-Logical_Networks/ > <https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ovirt.org_documentation_admin-2Dguide_chap-2DLogical-5FNetworks_&d=DwMFaQ&c=Vxt5e0Osvvt2gflwSlsJ5DmPGcPvTRKLJyp031rXjhg&r=FiPhL0Cl1ymZlnTyAIIL75tE4L0reHcDdD-7wUtUGHA&m=lvMQTxxtMmO0n6usZZCFu7YpsCTkH0c0sLWerugBDGo&s=MDRHWiynqsCFNQ5_p0hyRdgEgBE8A9n3XCv7Ml8_HdU&e=> > > > > *Viewing or Editing the Gateway for a Logical Network* > > Users can define the gateway, along with the IP address and subnet mask, > for a logical network. This is necessary when multiple networks exist on a > host and traffic should be routed through the specified network, rather > than the default gateway. > > If multiple networks exist on a host and the gateways are not defined, > return traffic will be routed through the default gateway, which may not > reach the intended destination. This would result in users being unable to > ping the host. > > oVirt handles multiple gateways automatically whenever an interface goes > up or down. > > > > > > > _______________________________________________ > Users mailing list > Users@ovirt.org > http://lists.ovirt.org/mailman/listinfo/users > <https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.ovirt.org_mailman_listinfo_users&d=DwMFaQ&c=Vxt5e0Osvvt2gflwSlsJ5DmPGcPvTRKLJyp031rXjhg&r=FiPhL0Cl1ymZlnTyAIIL75tE4L0reHcDdD-7wUtUGHA&m=lvMQTxxtMmO0n6usZZCFu7YpsCTkH0c0sLWerugBDGo&s=3AoaP23_BKDL6oJS92yzlJaVu_jOwJTm8d1fL4HmRug&e=> > > >
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org
