You could always go expand the volume after deployment by adding more disks to the logical volume it creates.
On Wed, Sep 12, 2018, 11:38 PM Jayme <jay...@gmail.com> wrote: > Eduardo, there is one thing you should be aware of. The jbod disks aren't > all pooled together to create one large storage domain. I had to spread my > data domains over the devices such as a data domain on /dev/SDA and data2 > on sdb etc not a big problem with only two disks per server but with ten it > could get ugly > > On Thu, Sep 13, 2018, 4:52 AM Eduardo Mayoral, <emayo...@arsys.es> wrote: > >> Thanks for your answers! >> >> Yes, my plan is a replica-3 too. The cluster will be bigger, though, 4 or >> 5 nodes with 10 disks each -> 40 to 50 bricks. >> Again, thanks for your help. >> >> -- >> Eduardo Mayoral. >> >> On 12/09/18 20:54, Jayme wrote: >> >> Should also note that I am using replica 3 configuration with no arbiter >> for extra redundancy. >> >> On Wed, Sep 12, 2018 at 3:53 PM Jayme <jay...@gmail.com> wrote: >> >>> I am running a three server oVirt hyperconverged setup with JBOD disks. >>> Two 2TB SSDs in JBOD per server. The configuration is working very well >>> for me so far. >>> >>> >>> >>> On Wed, Sep 12, 2018 at 2:36 PM Donny Davis <do...@fortnebula.com> >>> wrote: >>> >>>> JBOD is on the drop down when you do the setup for the volumes >>>> >>>> On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral <emayo...@arsys.es> >>>> wrote: >>>> >>>>> Hi! >>>>> >>>>> I am thinking about using some spare servers I have for a >>>>> hyperconverged oVirt + gluster. Only problem with these servers is that >>>>> the RAID card is not specially good, so I am considering using gluster >>>>> in a JBOD configuration. JBOD is supported for recent versions of >>>>> gluster, but I am not sure if this configuration is supported by oVirt, >>>>> or if there are any special considerations I should take into account. >>>>> >>>>> Anyone running oVirt + gluster with JBOD who can comment on this? >>>>> >>>>> Thanks! >>>>> >>>>> -- >>>>> >>>>> Eduardo Mayoral. >>>>> >>>>> _______________________________________________ >>>>> Users mailing list -- users@ovirt.org >>>>> To unsubscribe send an email to users-le...@ovirt.org >>>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>>> oVirt Code of Conduct: >>>>> https://www.ovirt.org/community/about/community-guidelines/ >>>>> List Archives: >>>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/ >>>>> >>>> _______________________________________________ >>>> Users mailing list -- users@ovirt.org >>>> To unsubscribe send an email to users-le...@ovirt.org >>>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>>> oVirt Code of Conduct: >>>> https://www.ovirt.org/community/about/community-guidelines/ >>>> List Archives: >>>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/ >>>> >>> >>
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WAHY6ICZZXRQMFRZ72SMFXAPEQZ3CE3N/