If you can afford it I would definitely do raid. Being able to monitor and replace disks at the raid level is much easier than brick. With raid I’d do a gluster arbiter setup so your aren’t losing too much space.
Keep an eye on libgfapi. It’s not default setting due to a few bugs but I’ve been testing it in my ssd hci cluster and have been seeing up to 5x io improvement. Also jumbo frames on those 10Gbps switches. Someone else will probably chime in re the other questions. I believe the GUI can only deploy a three sever cluster then you have to add the remaining hosts afterward. On Mon, Dec 23, 2019 at 5:56 PM <adrianquint...@gmail.com> wrote: > Hi, > After playing a bit with oVirt and Gluster in our pre-production > environment for the last year, we have decided to move forward with a our > production design using ovirt 4.3.7 + Gluster in a hyperconverged setup. > > For this we are looking get answers to a few questions that will help out > with our design and eventually lead to our production deployment phase: > > Current HW specs (total servers = 18): > 1.- Server type: DL380 GEN 9 > 2.- Memory: 256GB > 3.-Disk QTY per hypervisor: > - 2x600GB SAS (RAID 0) for the OS > - 9x1.2TB SSD (RAID[0, 6..]..? ) for GLUSTER. > 4.-Network: > - Bond1: 2x10Gbps > - Bond2: 2x10Gbps (for migration and gluster) > > Our plan is to build 2x9 node clusters, however the following questions > come up: > > 1.-Should we build 2 separate environments each with its own engine? or > should we do 1 engine that will manage both clusters? > 2.-What would be the best gluster volume layout for #1 above with regards > to RAID configuration: > - JBOD or RAID6 or…?. > - what is the benefit or downside of using JBOD vs RAID 6 for this > particular scenario? > 3.-Would you recommend Ansible-based deployment (if supported)? If yes > where would I find the documentation for it? or should we just deploy using > the UI?. > - I have reviewed the following and in Chapter 5 it only mentions Web UI > https://access.redhat.com/documentation/en-us/red_hat_hyperconverged_infrastructure_for_virtualization/1.6/html-single/deploying_red_hat_hyperconverged_infrastructure_for_virtualization/index#deployment_workflow > - Also looked at > https://github.com/gluster/gluster-ansible/tree/master/playbooks/hc-ansible-deployment > but could not get it to work properly. > > 4.-what is the recommended max server qty in a hyperconverged setup with > gluster, 12, 15, 18...? > > Thanks, > > Adrian > _______________________________________________ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TZEIOQW5KXIF47SZDZPMLUBWTP5QUPMZ/ >
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TXMSE62M2FWEQCSJXWOXS67K7CKNDZIA/
