If you observe similar problems in the future, you can just rsync the files
from one brick to the other and run a heal (usually a full heal resolves it
all).
Most probably the Hypervisor has accesed the file that consists the shards ans
the FUSE client noticed that the first host needs healing and uploaded the
files .
I have used the following to also trigger a heal (not good for large volumes)
find /fuse-mountpoint -iname '*' -exec stat {} \;
Best Regards,
Strahil Nikolov
On Jan 14, 2020 02:33, Jayme <jay...@gmail.com> wrote:
>
> I'm not exactly sure how but it looks like the problem worked itself out
> after a few hours
>
> On Mon, Jan 13, 2020 at 5:02 PM Jayme <jay...@gmail.com> wrote:
>>
>> I have a 3-way replica HCI setup. I recently placed one host in maintenance
>> to perform work on it. When I re-activated it I've noticed that many of my
>> gluster volumes are not completing the heal process.
>>
>> heal info shows shard files in heal pending. I looked up the files and it
>> appears that they exist on the other two hosts (the ones that remained
>> active) but do not exist on the host that was in maintenance.
>>
>> I tried to run a manual heal on one of the volumes and then a full heal as
>> well but there are still unhealed shards. The shard files also still do not
>> exist on the maintenance host. Here is an example from one of my volumes:
>>
>> # gluster volume heal prod_a info
>> Brick gluster0:/gluster_bricks/prod_a/prod_a
>> Status: Connected
>> Number of entries: 0
>>
>> Brick gluster1:/gluster_bricks/prod_a/prod_a
>> /.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.177
>> /.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.178
>> Status: Connected
>> Number of entries: 2
>>
>> Brick gluster2:/gluster_bricks/prod_a/prod_a
>> /.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.177
>> /.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.178
>> Status: Connected
>> Number of entries: 2
>>
>>
>> host0:
>>
>> # ls -al
>> /gluster_bricks/prod_a/prod_a/.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.177
>> ls: cannot access
>> /gluster_bricks/prod_a/prod_a/.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.177:
>> No such file or directory
>>
>> host1:
>>
>> # ls -al
>> /gluster_bricks/prod_a/prod_a/.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.177
>> -rw-rw----. 2 root root 67108864 Jan 13 16:57
>> /gluster_bricks/prod_a/prod_a/.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.177
>>
>> host2:
>>
>> # ls -al
>> /gluster_bricks/prod_a/prod_a/.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.177
>> -rw-rw----. 2 root root 67108864 Jan 13 16:57
>> /gluster_bricks/prod_a/prod_a/.shard/a746f8d2-5044-4d20-b525-24456e6f6f16.177
>>
>>
>> How can I heal these volumes?
>>
>> Thanks!_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/ENET37LSW4LYOJ7GIF2T7IDEM62E5PXM/
