On March 25, 2020 5:22:53 PM GMT+02:00, "Maton, Brett" <mat...@ltresources.co.uk> wrote: >There's an extra tab 'OS Pass through'... > >https://www.dell.com/community/Systems-Management-General/R630-Idrac-ethernet-visible-in-linux/td-p/4664283 > >I just disabled the pass through on one of my servers. >On the command line 'idrac' disappeared immediately from the output of >'ip >a', but remained in ovirt. >Putting the server in to maintenance mode and rebooting did remove the >iDRAC interface from the oVirt UI once the host was reactivated. > >Hope this helps > >Regards, >Brett > >On Wed, 25 Mar 2020 at 13:22, Nathanaël Blanchet <blanc...@abes.fr> >wrote: > >> Thanks for replying, >> >> I know this setting, but I do want to use the dedicated nic. >> >> The curious thing is that the MAC adress of the dedicated NIC into >IDRAC >> setting differs from the MAC reported into ovirt: >> >> So it lest me suppose that there is a kind of virtual card derived >from >> the physical one, can anybody confirm this? >> Le 25/03/2020 à 13:02, Maton, Brett a écrit : >> >> Can't say that I've tried it, but it looks like it's a setting within >iDRAC >> >> This link is for iDRAC 8, but it's probably similar for 7 and 9... >> >> >https://www.dell.com/community/PowerEdge-Hardware-General/iDRAC-8-NIC-Port-Sharing/td-p/5078061 >> >> >> On Wed, 25 Mar 2020 at 09:33, Nathanaël Blanchet <blanc...@abes.fr> >wrote: >> >>> Hello, >>> >>> I noticed an idrac interface was available in the host network since >an >>> undefined ovirt version. >>> >>> Mine are already plugged as dedicated vlan to administrate host at >the >>> lowest level. >>> >>> I tested to use it as a vm network on the same vlan, but it doesn't >work. >>> >>> What am I supposed to do with this available interface? >>> >>> PS: on HP hosts, no Ilo interface appears in host network tab >>> >>> -- >>> Nathanaël Blanchet >>> >>> Supervision réseau >>> SIRE >>> 227 avenue Professeur-Jean-Louis-Viala >>> 34193 MONTPELLIER CEDEX 5 >>> Tél. 33 (0)4 67 54 84 55 >>> Fax 33 (0)4 67 54 84 14 >>> blanc...@abes.fr >>> _______________________________________________ >>> Users mailing list -- users@ovirt.org >>> To unsubscribe send an email to users-le...@ovirt.org >>> Privacy Statement: https://www.ovirt.org/privacy-policy.html >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> >https://lists.ovirt.org/archives/list/users@ovirt.org/message/UP6WTZIH7YTAXG3CB32P7MZNMIFAAEDE/ >>> >> -- >> Nathanaël Blanchet >> >> Supervision réseau >> SIRE >> 227 avenue Professeur-Jean-Louis-Viala >> 34193 MONTPELLIER CEDEX 5 >> Tél. 33 (0)4 67 54 84 55 >> Fax 33 (0)4 67 54 84 14blanc...@abes.fr >> >>
You need to go to the Hosts tab and run a 'Refresh Capabilities' from the Manage drop-down. I use it when I plug USB devices for pass-through. Best Regards, Strahil Nikolov _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GQVA566KLAYPFVYHS2QKHPQQQUCYFFFQ/