Strahil, I have downgraded the target. The copy from the problematic volume to the target is going on now. Once I have the data copied, I might downgrade the problematic volume's Gluster to 6.5. At that point I might reattach the original ovirt domain and see if it will work again. But the copy is going on right now.
Thank You For Your Help ! On Mon, Jun 22, 2020 at 10:52 AM Strahil Nikolov <hunter86...@yahoo.com> wrote: > You should ensure that in the storage domain tab, the old storage is not > visible. > > I still wander why yoiu didn't try to downgrade first. > > Best Regards, > Strahil Nikolov > > На 22 юни 2020 г. 13:58:33 GMT+03:00, C Williams <cwilliams3...@gmail.com> > написа: > >Strahil, > > > >The GLCL3 storage domain was detached prior to attempting to add the > >new > >storage domain. > > > >Should I also "Remove" it ? > > > >Thank You For Your Help ! > > > >---------- Forwarded message --------- > >From: Strahil Nikolov <hunter86...@yahoo.com> > >Date: Mon, Jun 22, 2020 at 12:50 AM > >Subject: Re: [ovirt-users] Re: Fwd: Fwd: Issues with Gluster Domain > >To: C Williams <cwilliams3...@gmail.com> > >Cc: users <Users@ovirt.org> > > > > > >You can't add the new volume as it contains the same data (UUID) as the > >old > >one , thus you need to detach the old one before adding the new one - > >of > >course this means downtime for all VMs on that storage. > > > >As you see , downgrading is more simpler. For me v6.5 was working, > >while > >anything above (6.6+) was causing complete lockdown. Also v7.0 was > >working, but it's supported in oVirt 4.4. > > > >Best Regards, > >Strahil Nikolov > > > >На 22 юни 2020 г. 7:21:15 GMT+03:00, C Williams > ><cwilliams3...@gmail.com> > >написа: > >>Another question > >> > >>What version could I downgrade to safely ? I am at 6.9 . > >> > >>Thank You For Your Help !! > >> > >>On Sun, Jun 21, 2020 at 11:38 PM Strahil Nikolov > >><hunter86...@yahoo.com> > >>wrote: > >> > >>> You are definitely reading it wrong. > >>> 1. I didn't create a new storage domain ontop this new volume. > >>> 2. I used cli > >>> > >>> Something like this (in your case it should be 'replica 3'): > >>> gluster volume create newvol replica 3 arbiter 1 > >>ovirt1:/new/brick/path > >>> ovirt2:/new/brick/path ovirt3:/new/arbiter/brick/path > >>> gluster volume start newvol > >>> > >>> #Detach oldvol from ovirt > >>> > >>> mount -t glusterfs ovirt1:/oldvol /mnt/oldvol > >>> mount -t glusterfs ovirt1:/newvol /mnt/newvol > >>> cp -a /mnt/oldvol/* /mnt/newvol > >>> > >>> #Add only newvol as a storage domain in oVirt > >>> #Import VMs > >>> > >>> I still think that you should downgrade your gluster packages!!! > >>> > >>> Best Regards, > >>> Strahil Nikolov > >>> > >>> На 22 юни 2020 г. 0:43:46 GMT+03:00, C Williams > >><cwilliams3...@gmail.com> > >>> написа: > >>> >Strahil, > >>> > > >>> >It sounds like you used a "System Managed Volume" for the new > >>storage > >>> >domain,is that correct? > >>> > > >>> >Thank You For Your Help ! > >>> > > >>> >On Sun, Jun 21, 2020 at 5:40 PM C Williams > ><cwilliams3...@gmail.com> > >>> >wrote: > >>> > > >>> >> Strahil, > >>> >> > >>> >> So you made another oVirt Storage Domain -- then copied the data > >>with > >>> >cp > >>> >> -a from the failed volume to the new volume. > >>> >> > >>> >> At the root of the volume there will be the old domain folder id > >>ex > >>> >> 5fe3ad3f-2d21-404c-832e-4dc7318ca10d > >>> >> in my case. Did that cause issues with making the new domain > >>since > >>> >it is > >>> >> the same folder id as the old one ? > >>> >> > >>> >> Thank You For Your Help ! > >>> >> > >>> >> On Sun, Jun 21, 2020 at 5:18 PM Strahil Nikolov > >>> ><hunter86...@yahoo.com> > >>> >> wrote: > >>> >> > >>> >>> In my situation I had only the ovirt nodes. > >>> >>> > >>> >>> На 21 юни 2020 г. 22:43:04 GMT+03:00, C Williams > >>> ><cwilliams3...@gmail.com> > >>> >>> написа: > >>> >>> >Strahil, > >>> >>> > > >>> >>> >So should I make the target volume on 3 bricks which do not > >have > >>> >ovirt > >>> >>> >-- > >>> >>> >just gluster ? In other words (3) Centos 7 hosts ? > >>> >>> > > >>> >>> >Thank You For Your Help ! > >>> >>> > > >>> >>> >On Sun, Jun 21, 2020 at 3:08 PM Strahil Nikolov > >>> ><hunter86...@yahoo.com> > >>> >>> >wrote: > >>> >>> > > >>> >>> >> I created a fresh volume (which is not an ovirt sgorage > >>> >domain), > >>> >>> >set > >>> >>> >> the original storage domain in maintenance and detached > >>it. > >>> >>> >> Then I 'cp -a ' the data from the old to the new volume. > >>Next, > >>> >I > >>> >>> >just > >>> >>> >> added the new storage domain (the old one was a kind > >>of a > >>> >>> >> 'backup') - pointing to the new volume name. > >>> >>> >> > >>> >>> >> If you observe issues , I would recommend you to > >>downgrade > >>> >>> >> gluster packages one node at a time . Then you might be > >>able > >>> >to > >>> >>> >> restore your oVirt operations. > >>> >>> >> > >>> >>> >> Best Regards, > >>> >>> >> Strahil Nikolov > >>> >>> >> > >>> >>> >> На 21 юни 2020 г. 18:01:31 GMT+03:00, C Williams > >>> >>> ><cwilliams3...@gmail.com> > >>> >>> >> написа: > >>> >>> >> >Strahil, > >>> >>> >> > > >>> >>> >> >Thanks for the follow up ! > >>> >>> >> > > >>> >>> >> >How did you copy the data to another volume ? > >>> >>> >> > > >>> >>> >> >I have set up another storage domain GLCLNEW1 with a new > >>volume > >>> >>> >imgnew1 > >>> >>> >> >. > >>> >>> >> >How would you copy all of the data from the problematic > >>domain > >>> >GLCL3 > >>> >>> >> >with > >>> >>> >> >volume images3 to GLCLNEW1 and volume imgnew1 and preserve > >>all > >>> >the > >>> >>> >VMs, > >>> >>> >> >VM > >>> >>> >> >disks, settings, etc. ? > >>> >>> >> > > >>> >>> >> >Remember all of the regular ovirt disk copy, disk move, VM > >>> >export > >>> >>> >> >tools > >>> >>> >> >are failing and my VMs and disks are trapped on domain GLCL3 > >>and > >>> >>> >volume > >>> >>> >> >images3 right now. > >>> >>> >> > > >>> >>> >> >Please let me know > >>> >>> >> > > >>> >>> >> >Thank You For Your Help ! > >>> >>> >> > > >>> >>> >> > > >>> >>> >> > > >>> >>> >> > > >>> >>> >> > > >>> >>> >> >On Sun, Jun 21, 2020 at 8:27 AM Strahil Nikolov > >>> >>> ><hunter86...@yahoo.com> > >>> >>> >> >wrote: > >>> >>> >> > > >>> >>> >> >> Sorry to hear that. > >>> >>> >> >> I can say that for me 6.5 was working, while 6.6 > >didn't > >>> >and I > >>> >>> >> >upgraded > >>> >>> >> >> to 7.0 . > >>> >>> >> >> In the ended , I have ended with creating a new fresh > >>> >volume > >>> >>> >and > >>> >>> >> >> physically copying the data there, then I detached the > >>> >storage > >>> >>> >> >domains and > >>> >>> >> >> attached to the new ones (which holded the old data), > >>but > >>> >I > >>> >>> >> >could > >>> >>> >> >> afford the downtime. > >>> >>> >> >> Also, I can say that v7.0 ( but not 7.1 or anything > >>later) > >>> >>> >also > >>> >>> >> >> worked without the ACL issue, but it causes some > >trouble > >>> >in > >>> >>> >oVirt > >>> >>> >> >- so > >>> >>> >> >> avoid that unless you have no other options. > >>> >>> >> >> > >>> >>> >> >> Best Regards, > >>> >>> >> >> Strahil Nikolov > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> >> На 21 юни 2020 г. 4:39:46 GMT+03:00, C Williams > >>> >>> >> ><cwilliams3...@gmail.com> > >>> >>> >> >> написа: > >>> >>> >> >> >Hello, > >>> >>> >> >> > > >>> >>> >> >> >Upgrading diidn't help > >>> >>> >> >> > > >>> >>> >> >> >Still acl errors trying to use a Virtual Disk from a VM > >>> >>> >> >> > > >>> >>> >> >> >[root@ov06 bricks]# tail bricks-brick04-images3.log | > >grep > >>> >acl > >>> >>> >> >> >[2020-06-21 01:33:45.665888] I [MSGID: 139001] > >>> >>> >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] > >>> >>> >> >0-images3-access-control: > >>> >>> >> >> >client: > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >>> >>> >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >>> >> >> >req(uid:107,gid:107,perm:1,ngrps:3), > >>> >>> >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >>> >acl:-) > >>> >>> >> >> >[Permission denied] > >>> >>> >> >> >The message "I [MSGID: 139001] > >>> >>> >> >> >[posix-acl.c:263:posix_acl_log_permit_denied] > >>> >>> >> >0-images3-access-control: > >>> >>> >> >> >client: > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>CTX_ID:3697a7f1-44fb-4258-96b0-98cb4137d195-GRAPH_ID:0-PID:6706-HOST:ov06.ntc.srcle.com-PC_NAME:images3-client-0-RECON_NO:-0, > >>> >>> >> >> >gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >>> >> >> >req(uid:107,gid:107,perm:1,ngrps:3), > >>> >>> >> >> >ctx(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >>> >acl:-) > >>> >>> >> >> >[Permission denied]" repeated 2 times between [2020-06-21 > >>> >>> >> >> >01:33:45.665888] > >>> >>> >> >> >and [2020-06-21 01:33:45.806779] > >>> >>> >> >> > > >>> >>> >> >> >Thank You For Your Help ! > >>> >>> >> >> > > >>> >>> >> >> >On Sat, Jun 20, 2020 at 8:59 PM C Williams > >>> >>> ><cwilliams3...@gmail.com> > >>> >>> >> >> >wrote: > >>> >>> >> >> > > >>> >>> >> >> >> Hello, > >>> >>> >> >> >> > >>> >>> >> >> >> Based on the situation, I am planning to upgrade the 3 > >>> >affected > >>> >>> >> >> >hosts. > >>> >>> >> >> >> > >>> >>> >> >> >> My reasoning is that the hosts/bricks were attached to > >>6.9 > >>> >at > >>> >>> >one > >>> >>> >> >> >time. > >>> >>> >> >> >> > >>> >>> >> >> >> Thanks For Your Help ! > >>> >>> >> >> >> > >>> >>> >> >> >> On Sat, Jun 20, 2020 at 8:38 PM C Williams > >>> >>> >> ><cwilliams3...@gmail.com> > >>> >>> >> >> >> wrote: > >>> >>> >> >> >> > >>> >>> >> >> >>> Strahil, > >>> >>> >> >> >>> > >>> >>> >> >> >>> The gluster version on the current 3 gluster hosts is > >>6.7 > >>> >>> >(last > >>> >>> >> >> >update > >>> >>> >> >> >>> 2/26). These 3 hosts provide 1 brick each for the > >>replica > >>> >3 > >>> >>> >> >volume. > >>> >>> >> >> >>> > >>> >>> >> >> >>> Earlier I had tried to add 6 additional hosts to the > >>> >cluster. > >>> >>> >> >Those > >>> >>> >> >> >new > >>> >>> >> >> >>> hosts were 6.9 gluster. > >>> >>> >> >> >>> > >>> >>> >> >> >>> I attempted to make a new separate volume with 3 > >bricks > >>> >>> >provided > >>> >>> >> >by > >>> >>> >> >> >the 3 > >>> >>> >> >> >>> new gluster 6.9 hosts. After having many errors from > >>the > >>> >>> >oVirt > >>> >>> >> >> >interface, > >>> >>> >> >> >>> I gave up and removed the 6 new hosts from the > >cluster. > >>> >That > >>> >>> >is > >>> >>> >> >> >where the > >>> >>> >> >> >>> problems started. The intent was to expand the gluster > >>> >cluster > >>> >>> >> >while > >>> >>> >> >> >making > >>> >>> >> >> >>> 2 new volumes for that cluster. The ovirt compute > >>cluster > >>> >>> >would > >>> >>> >> >> >allow for > >>> >>> >> >> >>> efficient VM migration between 9 hosts -- while having > >>> >>> >separate > >>> >>> >> >> >gluster > >>> >>> >> >> >>> volumes for safety purposes. > >>> >>> >> >> >>> > >>> >>> >> >> >>> Looking at the brick logs, I see where there are acl > >>> >errors > >>> >>> >> >starting > >>> >>> >> >> >from > >>> >>> >> >> >>> the time of the removal of the 6 new hosts. > >>> >>> >> >> >>> > >>> >>> >> >> >>> Please check out the attached brick log from 6/14-18. > >>The > >>> >>> >events > >>> >>> >> >> >started > >>> >>> >> >> >>> on 6/17. > >>> >>> >> >> >>> > >>> >>> >> >> >>> I wish I had a downgrade path. > >>> >>> >> >> >>> > >>> >>> >> >> >>> Thank You For The Help !! > >>> >>> >> >> >>> > >>> >>> >> >> >>> On Sat, Jun 20, 2020 at 7:47 PM Strahil Nikolov > >>> >>> >> >> ><hunter86...@yahoo.com> > >>> >>> >> >> >>> wrote: > >>> >>> >> >> >>> > >>> >>> >> >> >>>> Hi , > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> This one really looks like the ACL bug I was hit with > >>> >when I > >>> >>> >> >> >updated > >>> >>> >> >> >>>> from Gluster v6.5 to 6.6 and later from 7.0 to 7.2. > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> Did you update your setup recently ? Did you upgrade > >>> >gluster > >>> >>> >> >also ? > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> You have to check the gluster logs in order to verify > >>> >that, > >>> >>> >so > >>> >>> >> >you > >>> >>> >> >> >can > >>> >>> >> >> >>>> try: > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> 1. Set Gluster logs to trace level (for details > >check: > >>> >>> >> >> >>>> > >>> >>> >> >> > > >>> >>> >> >> > >>> >>> >> > > >>> >>> >> > >>> >>> > > >>> >>> > >>> > > >>> > >> > > > https://access.redhat.com/documentation/en-us/red_hat_gluster_storage/3/html/administration_guide/configuring_the_log_level > >>> >>> >> >> >>>> ) > >>> >>> >> >> >>>> 2. Power up a VM that was already off , or retry the > >>> >>> >procedure > >>> >>> >> >from > >>> >>> >> >> >the > >>> >>> >> >> >>>> logs you sent. > >>> >>> >> >> >>>> 3. Stop the trace level of the logs > >>> >>> >> >> >>>> 4. Check libvirt logs on the host that was supposed > >to > >>> >power > >>> >>> >up > >>> >>> >> >the > >>> >>> >> >> >VM > >>> >>> >> >> >>>> (in case a VM was powered on) > >>> >>> >> >> >>>> 5. Check the gluster brick logs on all nodes for ACL > >>> >errors. > >>> >>> >> >> >>>> Here is a sample from my old logs: > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 > >>> >>> >> >> >13:19:41.489047] I > >>> >>> >> >> >>>> [MSGID: 139001] > >>> >[posix-acl.c:262:posix_acl_log_permit_denied] > >>> >>> >> >> >>>> 0-data_fast4-access-control: client: > >>> >CTX_ID:4a654305-d2e4- > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, > >>> >>> >> >> >>>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >>> >> >> >>>> req(uid:36,gid:36,perm:1,ngrps:3), ctx > >>> >>> >> >> >>>> > >(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >>> >acl:-) > >>> >>> >> >> >>>> [Permission denied] > >>> >>> >> >> >>>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 > >>> >>> >> >> >13:22:51.818796] I > >>> >>> >> >> >>>> [MSGID: 139001] > >>> >[posix-acl.c:262:posix_acl_log_permit_denied] > >>> >>> >> >> >>>> 0-data_fast4-access-control: client: > >>> >CTX_ID:4a654305-d2e4- > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, > >>> >>> >> >> >>>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >>> >> >> >>>> req(uid:36,gid:36,perm:1,ngrps:3), ctx > >>> >>> >> >> >>>> > >(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >>> >acl:-) > >>> >>> >> >> >>>> [Permission denied] > >>> >>> >> >> >>>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 > >>> >>> >> >> >13:24:43.732856] I > >>> >>> >> >> >>>> [MSGID: 139001] > >>> >[posix-acl.c:262:posix_acl_log_permit_denied] > >>> >>> >> >> >>>> 0-data_fast4-access-control: client: > >>> >CTX_ID:4a654305-d2e4- > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, > >>> >>> >> >> >>>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >>> >> >> >>>> req(uid:36,gid:36,perm:1,ngrps:3), ctx > >>> >>> >> >> >>>> > >(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >>> >acl:-) > >>> >>> >> >> >>>> [Permission denied] > >>> >>> >> >> >>>> gluster_bricks-data_fast4-data_fast4.log:[2020-03-18 > >>> >>> >> >> >13:26:50.758178] I > >>> >>> >> >> >>>> [MSGID: 139001] > >>> >[posix-acl.c:262:posix_acl_log_permit_denied] > >>> >>> >> >> >>>> 0-data_fast4-access-control: client: > >>> >CTX_ID:4a654305-d2e4- > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>4a10-bad9-58d670d99a97-GRAPH_ID:0-PID:32412-HOST:ovirt1.localdomain-PC_NAME:data_fast4-client-0-RECON_NO:-19, > >>> >>> >> >> >>>> gfid: be318638-e8a0-4c6d-977d-7a937aa84806, > >>> >>> >> >> >>>> req(uid:36,gid:36,perm:1,ngrps:3), ctx > >>> >>> >> >> >>>> > >(uid:0,gid:0,in-groups:0,perm:000,updated-fop:INVALID, > >>> >acl:-) > >>> >>> >> >> >>>> [Permission denied] > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> In my case , the workaround was to downgrade the > >>gluster > >>> >>> >> >packages > >>> >>> >> >> >on all > >>> >>> >> >> >>>> nodes (and reboot each node 1 by 1 ) if the major > >>version > >>> >is > >>> >>> >the > >>> >>> >> >> >same, but > >>> >>> >> >> >>>> if you upgraded to v7.X - then you can try the v7.0 . > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> Best Regards, > >>> >>> >> >> >>>> Strahil Nikolov > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> В събота, 20 юни 2020 г., 18:48:42 ч. Гринуич+3, C > >>> >Williams < > >>> >>> >> >> >>>> cwilliams3...@gmail.com> написа: > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> Hello, > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> Here are additional log tiles as well as a tree of > >the > >>> >>> >> >problematic > >>> >>> >> >> >>>> Gluster storage domain. During this time I attempted > >>to > >>> >copy > >>> >>> >a > >>> >>> >> >> >virtual disk > >>> >>> >> >> >>>> to another domain, move a virtual disk to another > >>domain > >>> >and > >>> >>> >run > >>> >>> >> >a > >>> >>> >> >> >VM where > >>> >>> >> >> >>>> the virtual hard disk would be used. > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> The copies/moves failed and the VM went into pause > >>mode > >>> >when > >>> >>> >the > >>> >>> >> >> >virtual > >>> >>> >> >> >>>> HDD was involved. > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> Please check these out. > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> Thank You For Your Help ! > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> On Sat, Jun 20, 2020 at 9:54 AM C Williams > >>> >>> >> >> ><cwilliams3...@gmail.com> > >>> >>> >> >> >>>> wrote: > >>> >>> >> >> >>>> > Strahil, > >>> >>> >> >> >>>> > > >>> >>> >> >> >>>> > I understand. Please keep me posted. > >>> >>> >> >> >>>> > > >>> >>> >> >> >>>> > Thanks For The Help ! > >>> >>> >> >> >>>> > > >>> >>> >> >> >>>> > On Sat, Jun 20, 2020 at 4:36 AM Strahil Nikolov > >>> >>> >> >> ><hunter86...@yahoo.com> > >>> >>> >> >> >>>> wrote: > >>> >>> >> >> >>>> >> Hey C Williams, > >>> >>> >> >> >>>> >> > >>> >>> >> >> >>>> >> sorry for the delay, but I couldn't get somw time > >>to > >>> >>> >check > >>> >>> >> >your > >>> >>> >> >> >>>> logs. Will try a little bit later. > >>> >>> >> >> >>>> >> > >>> >>> >> >> >>>> >> Best Regards, > >>> >>> >> >> >>>> >> Strahil Nikolov > >>> >>> >> >> >>>> >> > >>> >>> >> >> >>>> >> На 20 юни 2020 г. 2:37:22 GMT+03:00, C Williams < > >>> >>> >> >> >>>> cwilliams3...@gmail.com> написа: > >>> >>> >> >> >>>> >>>Hello, > >>> >>> >> >> >>>> >>> > >>> >>> >> >> >>>> >>>Was wanting to follow up on this issue. Users are > >>> >>> >impacted. > >>> >>> >> >> >>>> >>> > >>> >>> >> >> >>>> >>>Thank You > >>> >>> >> >> >>>> >>> > >>> >>> >> >> >>>> >>>On Fri, Jun 19, 2020 at 9:20 AM C Williams > >>> >>> >> >> ><cwilliams3...@gmail.com> > >>> >>> >> >> >>>> >>>wrote: > >>> >>> >> >> >>>> >>> > >>> >>> >> >> >>>> >>>> Hello, > >>> >>> >> >> >>>> >>>> > >>> >>> >> >> >>>> >>>> Here are the logs (some IPs are changed ) > >>> >>> >> >> >>>> >>>> > >>> >>> >> >> >>>> >>>> ov05 is the SPM > >>> >>> >> >> >>>> >>>> > >>> >>> >> >> >>>> >>>> Thank You For Your Help ! > >>> >>> >> >> >>>> >>>> > >>> >>> >> >> >>>> >>>> On Thu, Jun 18, 2020 at 11:31 PM Strahil Nikolov > >>> >>> >> >> >>>> >>><hunter86...@yahoo.com> > >>> >>> >> >> >>>> >>>> wrote: > >>> >>> >> >> >>>> >>>> > >>> >>> >> >> >>>> >>>>> Check on the hosts tab , which is your current > >>SPM > >>> >>> >(last > >>> >>> >> >> >column in > >>> >>> >> >> >>>> >>>Admin > >>> >>> >> >> >>>> >>>>> UI). > >>> >>> >> >> >>>> >>>>> Then open the /var/log/vdsm/vdsm.log and > >repeat > >>> >the > >>> >>> >> >> >operation. > >>> >>> >> >> >>>> >>>>> Then provide the log from that host and the > >>> >engine's > >>> >>> >log > >>> >>> >> >(on > >>> >>> >> >> >the > >>> >>> >> >> >>>> >>>>> HostedEngine VM or on your standalone engine). > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> Best Regards, > >>> >>> >> >> >>>> >>>>> Strahil Nikolov > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> На 18 юни 2020 г. 23:59:36 GMT+03:00, C > >Williams > >>> >>> >> >> >>>> >>><cwilliams3...@gmail.com> > >>> >>> >> >> >>>> >>>>> написа: > >>> >>> >> >> >>>> >>>>> >Resending to eliminate email issues > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> >---------- Forwarded message --------- > >>> >>> >> >> >>>> >>>>> >From: C Williams <cwilliams3...@gmail.com> > >>> >>> >> >> >>>> >>>>> >Date: Thu, Jun 18, 2020 at 4:01 PM > >>> >>> >> >> >>>> >>>>> >Subject: Re: [ovirt-users] Fwd: Issues with > >>> >Gluster > >>> >>> >> >Domain > >>> >>> >> >> >>>> >>>>> >To: Strahil Nikolov <hunter86...@yahoo.com> > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> >Here is output from mount > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> >192.168.24.12:/stor/import0 on > >>> >>> >> >> >>>> >>>>> > >>>/rhev/data-center/mnt/192.168.24.12:_stor_import0 > >>> >>> >> >> >>>> >>>>> >type nfs4 > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.12) > >>> >>> >> >> >>>> >>>>> >192.168.24.13:/stor/import1 on > >>> >>> >> >> >>>> >>>>> > >>>/rhev/data-center/mnt/192.168.24.13:_stor_import1 > >>> >>> >> >> >>>> >>>>> >type nfs4 > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) > >>> >>> >> >> >>>> >>>>> >192.168.24.13:/stor/iso1 on > >>> >>> >> >> >>>> >>>>> >/rhev/data-center/mnt/192.168.24.13:_stor_iso1 > >>> >>> >> >> >>>> >>>>> >type nfs4 > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) > >>> >>> >> >> >>>> >>>>> >192.168.24.13:/stor/export0 on > >>> >>> >> >> >>>> >>>>> > >>>/rhev/data-center/mnt/192.168.24.13:_stor_export0 > >>> >>> >> >> >>>> >>>>> >type nfs4 > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>(rw,relatime,vers=4.1,rsize=1048576,wsize=1048576,namlen=255,soft,nosharecache,proto=tcp,timeo=600,retrans=6,sec=sys,clientaddr=192.168.24.18,local_lock=none,addr=192.168.24.13) > >>> >>> >> >> >>>> >>>>> >192.168.24.15:/images on > >>> >>> >> >> >>>> >>>>> > >>> >>/rhev/data-center/mnt/glusterSD/192.168.24.15:_images > >>> >>> >> >> >>>> >>>>> >type fuse.glusterfs > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) > >>> >>> >> >> >>>> >>>>> >192.168.24.18:/images3 on > >>> >>> >> >> >>>> >>>>> > >>> >>/rhev/data-center/mnt/glusterSD/192.168.24.18:_images3 > >>> >>> >> >> >>>> >>>>> >type fuse.glusterfs > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>(rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072) > >>> >>> >> >> >>>> >>>>> >tmpfs on /run/user/0 type tmpfs > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >>(rw,nosuid,nodev,relatime,seclabel,size=13198392k,mode=700) > >>> >>> >> >> >>>> >>>>> >[root@ov06 glusterfs]# > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> >Also here is a screenshot of the console > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> >[image: image.png] > >>> >>> >> >> >>>> >>>>> >The other domains are up > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> >Import0 and Import1 are NFS . GLCL0 is > >gluster. > >>> >They > >>> >>> >all > >>> >>> >> >are > >>> >>> >> >> >>>> >>>running > >>> >>> >> >> >>>> >>>>> >VMs > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> >Thank You For Your Help ! > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> >On Thu, Jun 18, 2020 at 3:51 PM Strahil > >Nikolov > >>> >>> >> >> >>>> >>><hunter86...@yahoo.com> > >>> >>> >> >> >>>> >>>>> >wrote: > >>> >>> >> >> >>>> >>>>> > > >>> >>> >> >> >>>> >>>>> >> I don't see > >>> >>> >> >> >'/rhev/data-center/mnt/192.168.24.13:_stor_import1' > >>> >>> >> >> >>>> >>>>> >mounted > >>> >>> >> >> >>>> >>>>> >> at all . > >>> >>> >> >> >>>> >>>>> >> What is the status of all storage domains ? > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> >> Best Regards, > >>> >>> >> >> >>>> >>>>> >> Strahil Nikolov > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> >> На 18 юни 2020 г. 21:43:44 GMT+03:00, C > >>Williams > >>> >>> >> >> >>>> >>>>> ><cwilliams3...@gmail.com> > >>> >>> >> >> >>>> >>>>> >> написа: > >>> >>> >> >> >>>> >>>>> >> > Resending to deal with possible email > >>issues > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> >---------- Forwarded message --------- > >>> >>> >> >> >>>> >>>>> >> >From: C Williams <cwilliams3...@gmail.com> > >>> >>> >> >> >>>> >>>>> >> >Date: Thu, Jun 18, 2020 at 2:07 PM > >>> >>> >> >> >>>> >>>>> >> >Subject: Re: [ovirt-users] Issues with > >>Gluster > >>> >>> >Domain > >>> >>> >> >> >>>> >>>>> >> >To: Strahil Nikolov <hunter86...@yahoo.com> > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> >More > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> >[root@ov06 ~]# for i in $(gluster volume > >>list); > >>> > do > >>> >>> >> >echo > >>> >>> >> >> >>>> >>>$i;echo; > >>> >>> >> >> >>>> >>>>> >> >gluster > >>> >>> >> >> >>>> >>>>> >> >volume info $i; echo;echo;gluster volume > >>status > >>> >>> >> >> >>>> >>>>> >$i;echo;echo;echo;done > >>> >>> >> >> >>>> >>>>> >> >images3 > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> >Volume Name: images3 > >>> >>> >> >> >>>> >>>>> >> >Type: Replicate > >>> >>> >> >> >>>> >>>>> >> >Volume ID: > >>0243d439-1b29-47d0-ab39-d61c2f15ae8b > >>> >>> >> >> >>>> >>>>> >> >Status: Started > >>> >>> >> >> >>>> >>>>> >> >Snapshot Count: 0 > >>> >>> >> >> >>>> >>>>> >> >Number of Bricks: 1 x 3 = 3 > >>> >>> >> >> >>>> >>>>> >> >Transport-type: tcp > >>> >>> >> >> >>>> >>>>> >> >Bricks: > >>> >>> >> >> >>>> >>>>> >> >Brick1: > >>192.168.24.18:/bricks/brick04/images3 > >>> >>> >> >> >>>> >>>>> >> >Brick2: > >>192.168.24.19:/bricks/brick05/images3 > >>> >>> >> >> >>>> >>>>> >> >Brick3: > >>192.168.24.20:/bricks/brick06/images3 > >>> >>> >> >> >>>> >>>>> >> >Options Reconfigured: > >>> >>> >> >> >>>> >>>>> >> >performance.client-io-threads: on > >>> >>> >> >> >>>> >>>>> >> >nfs.disable: on > >>> >>> >> >> >>>> >>>>> >> >transport.address-family: inet > >>> >>> >> >> >>>> >>>>> >> >user.cifs: off > >>> >>> >> >> >>>> >>>>> >> >auth.allow: * > >>> >>> >> >> >>>> >>>>> >> >performance.quick-read: off > >>> >>> >> >> >>>> >>>>> >> >performance.read-ahead: off > >>> >>> >> >> >>>> >>>>> >> >performance.io-cache: off > >>> >>> >> >> >>>> >>>>> >> >performance.low-prio-threads: 32 > >>> >>> >> >> >>>> >>>>> >> >network.remote-dio: off > >>> >>> >> >> >>>> >>>>> >> >cluster.eager-lock: enable > >>> >>> >> >> >>>> >>>>> >> >cluster.quorum-type: auto > >>> >>> >> >> >>>> >>>>> >> >cluster.server-quorum-type: server > >>> >>> >> >> >>>> >>>>> >> >cluster.data-self-heal-algorithm: full > >>> >>> >> >> >>>> >>>>> >> >cluster.locking-scheme: granular > >>> >>> >> >> >>>> >>>>> >> >cluster.shd-max-threads: 8 > >>> >>> >> >> >>>> >>>>> >> >cluster.shd-wait-qlength: 10000 > >>> >>> >> >> >>>> >>>>> >> >features.shard: on > >>> >>> >> >> >>>> >>>>> >> >cluster.choose-local: off > >>> >>> >> >> >>>> >>>>> >> >client.event-threads: 4 > >>> >>> >> >> >>>> >>>>> >> >server.event-threads: 4 > >>> >>> >> >> >>>> >>>>> >> >storage.owner-uid: 36 > >>> >>> >> >> >>>> >>>>> >> >storage.owner-gid: 36 > >>> >>> >> >> >>>> >>>>> >> >performance.strict-o-direct: on > >>> >>> >> >> >>>> >>>>> >> >network.ping-timeout: 30 > >>> >>> >> >> >>>> >>>>> >> >cluster.granular-entry-heal: enable > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> >Status of volume: images3 > >>> >>> >> >> >>>> >>>>> >> >Gluster process > >>TCP > >>> >>> >Port > >>> >>> >> >> >RDMA Port > >>> >>> >> >> >>>> >>>>> >Online > >>> >>> >> >> >>>> >>>>> >> > Pid > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>>------------------------------------------------------------------------------ > >>> >>> >> >> >>>> >>>>> >> >Brick 192.168.24.18:/bricks/brick04/images3 > >>> >49152 > >>> >>> >> >0 > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> >>>Y > >>> >>> >> >> >>>> >>>>> >> >6666 > >>> >>> >> >> >>>> >>>>> >> >Brick 192.168.24.19:/bricks/brick05/images3 > >>> >49152 > >>> >>> >> >0 > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> >>>Y > >>> >>> >> >> >>>> >>>>> >> >6779 > >>> >>> >> >> >>>> >>>>> >> >Brick 192.168.24.20:/bricks/brick06/images3 > >>> >49152 > >>> >>> >> >0 > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> >>>Y > >>> >>> >> >> >>>> >>>>> >> >7227 > >>> >>> >> >> >>>> >>>>> >> >Self-heal Daemon on localhost > >>N/A > >>> >>> >> >N/A > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> >>>Y > >>> >>> >> >> >>>> >>>>> >> >6689 > >>> >>> >> >> >>>> >>>>> >> >Self-heal Daemon on ov07.ntc.srcle.com > >>N/A > >>> >>> >> >N/A > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> >>>Y > >>> >>> >> >> >>>> >>>>> >> >6802 > >>> >>> >> >> >>>> >>>>> >> >Self-heal Daemon on ov08.ntc.srcle.com > >>N/A > >>> >>> >> >N/A > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> >>>Y > >>> >>> >> >> >>>> >>>>> >> >7250 > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> >Task Status of Volume images3 > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>>------------------------------------------------------------------------------ > >>> >>> >> >> >>>> >>>>> >> >There are no active volume tasks > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> >[root@ov06 ~]# ls -l > >>> >>> >/rhev/data-center/mnt/glusterSD/ > >>> >>> >> >> >>>> >>>>> >> >total 16 > >>> >>> >> >> >>>> >>>>> >> >drwxr-xr-x. 5 vdsm kvm 8192 Jun 18 14:04 > >>> >>> >> >> >192.168.24.15:_images > >>> >>> >> >> >>>> >>>>> >> >drwxr-xr-x. 5 vdsm kvm 8192 Jun 18 14:05 > >>> >>> >> >192.168.24.18: > >>> >>> >> >> >>>> _images3 > >>> >>> >> >> >>>> >>>>> >> >[root@ov06 ~]# > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> >On Thu, Jun 18, 2020 at 2:03 PM C Williams > >>> >>> >> >> >>>> >>><cwilliams3...@gmail.com> > >>> >>> >> >> >>>> >>>>> >> >wrote: > >>> >>> >> >> >>>> >>>>> >> > > >>> >>> >> >> >>>> >>>>> >> >> Strahil, > >>> >>> >> >> >>>> >>>>> >> >> > >>> >>> >> >> >>>> >>>>> >> >> Here you go -- Thank You For Your Help ! > >>> >>> >> >> >>>> >>>>> >> >> > >>> >>> >> >> >>>> >>>>> >> >> BTW -- I can write a test file to gluster > >>and > >>> >it > >>> >>> >> >> >replicates > >>> >>> >> >> >>>> >>>>> >properly. > >>> >>> >> >> >>>> >>>>> >> >> Thinking something about the oVirt > >Storage > >>> >Domain > >>> >>> >? > >>> >>> >> >> >>>> >>>>> >> >> > >>> >>> >> >> >>>> >>>>> >> >> [root@ov08 ~]# gluster pool list > >>> >>> >> >> >>>> >>>>> >> >> UUID > >>> >Hostname > >>> >>> >> >> >>>> >>>>> >State > >>> >>> >> >> >>>> >>>>> >> >> 5b40c659-d9ab-43c3-9af8-18b074ea0b83 > >>ov06 > >>> >>> >> >> >>>> >>>>> >> >Connected > >>> >>> >> >> >>>> >>>>> >> >> 36ce5a00-6f65-4926-8438-696944ebadb5 > >>> >>> >> >> >ov07.ntc.srcle.com > >>> >>> >> >> >>>> >>>>> >> >Connected > >>> >>> >> >> >>>> >>>>> >> >> c7e7abdb-a8f4-4842-924c-e227f0db1b29 > >>> >localhost > >>> >>> >> >> >>>> >>>>> >> >Connected > >>> >>> >> >> >>>> >>>>> >> >> [root@ov08 ~]# gluster volume list > >>> >>> >> >> >>>> >>>>> >> >> images3 > >>> >>> >> >> >>>> >>>>> >> >> > >>> >>> >> >> >>>> >>>>> >> >> On Thu, Jun 18, 2020 at 1:13 PM Strahil > >>> >Nikolov > >>> >>> >> >> >>>> >>>>> >> ><hunter86...@yahoo.com> > >>> >>> >> >> >>>> >>>>> >> >> wrote: > >>> >>> >> >> >>>> >>>>> >> >> > >>> >>> >> >> >>>> >>>>> >> >>> Log to the oVirt cluster and provide the > >>> >output > >>> >>> >of: > >>> >>> >> >> >>>> >>>>> >> >>> gluster pool list > >>> >>> >> >> >>>> >>>>> >> >>> gluster volume list > >>> >>> >> >> >>>> >>>>> >> >>> for i in $(gluster volume list); do > >>echo > >>> >>> >$i;echo; > >>> >>> >> >> >gluster > >>> >>> >> >> >>>> >>>>> >volume > >>> >>> >> >> >>>> >>>>> >> >info > >>> >>> >> >> >>>> >>>>> >> >>> $i; echo;echo;gluster volume status > >>> >>> >> >> >$i;echo;echo;echo;done > >>> >>> >> >> >>>> >>>>> >> >>> > >>> >>> >> >> >>>> >>>>> >> >>> ls -l /rhev/data-center/mnt/glusterSD/ > >>> >>> >> >> >>>> >>>>> >> >>> > >>> >>> >> >> >>>> >>>>> >> >>> Best Regards, > >>> >>> >> >> >>>> >>>>> >> >>> Strahil Nikolov > >>> >>> >> >> >>>> >>>>> >> >>> > >>> >>> >> >> >>>> >>>>> >> >>> > >>> >>> >> >> >>>> >>>>> >> >>> На 18 юни 2020 г. 19:17:46 GMT+03:00, C > >>> >Williams > >>> >>> >> >> >>>> >>>>> >> ><cwilliams3...@gmail.com> > >>> >>> >> >> >>>> >>>>> >> >>> написа: > >>> >>> >> >> >>>> >>>>> >> >>> >Hello, > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >I recently added 6 hosts to an existing > >>> >oVirt > >>> >>> >> >> >>>> >>>compute/gluster > >>> >>> >> >> >>>> >>>>> >> >cluster. > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >Prior to this attempted addition, my > >>> >cluster > >>> >>> >had 3 > >>> >>> >> >> >>>> >>>Hypervisor > >>> >>> >> >> >>>> >>>>> >hosts > >>> >>> >> >> >>>> >>>>> >> >and > >>> >>> >> >> >>>> >>>>> >> >>> >3 > >>> >>> >> >> >>>> >>>>> >> >>> >gluster bricks which made up a single > >>> >gluster > >>> >>> >> >volume > >>> >>> >> >> >>>> >>>(replica 3 > >>> >>> >> >> >>>> >>>>> >> >volume) > >>> >>> >> >> >>>> >>>>> >> >>> >. I > >>> >>> >> >> >>>> >>>>> >> >>> >added the additional hosts and made a > >>brick > >>> >on > >>> >>> >3 > >>> >>> >> >of > >>> >>> >> >> >the new > >>> >>> >> >> >>>> >>>>> >hosts > >>> >>> >> >> >>>> >>>>> >> >and > >>> >>> >> >> >>>> >>>>> >> >>> >attempted to make a new replica 3 > >>volume. I > >>> >had > >>> >>> >> >> >difficulty > >>> >>> >> >> >>>> >>>>> >> >creating > >>> >>> >> >> >>>> >>>>> >> >>> >the > >>> >>> >> >> >>>> >>>>> >> >>> >new volume. So, I decided that I would > >>make > >>> >a > >>> >>> >new > >>> >>> >> >> >>>> >>>>> >compute/gluster > >>> >>> >> >> >>>> >>>>> >> >>> >cluster > >>> >>> >> >> >>>> >>>>> >> >>> >for each set of 3 new hosts. > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >I removed the 6 new hosts from the > >>existing > >>> >>> >oVirt > >>> >>> >> >> >>>> >>>>> >Compute/Gluster > >>> >>> >> >> >>>> >>>>> >> >>> >Cluster > >>> >>> >> >> >>>> >>>>> >> >>> >leaving the 3 original hosts in place > >>with > >>> >>> >their > >>> >>> >> >> >bricks. At > >>> >>> >> >> >>>> >>>that > >>> >>> >> >> >>>> >>>>> >> >point > >>> >>> >> >> >>>> >>>>> >> >>> >my > >>> >>> >> >> >>>> >>>>> >> >>> >original bricks went down and came back > >>up > >>> >. > >>> >>> >The > >>> >>> >> >> >volume > >>> >>> >> >> >>>> >>>showed > >>> >>> >> >> >>>> >>>>> >> >entries > >>> >>> >> >> >>>> >>>>> >> >>> >that > >>> >>> >> >> >>>> >>>>> >> >>> >needed healing. At that point I ran > >>gluster > >>> >>> >volume > >>> >>> >> >> >heal > >>> >>> >> >> >>>> >>>images3 > >>> >>> >> >> >>>> >>>>> >> >full, > >>> >>> >> >> >>>> >>>>> >> >>> >etc. > >>> >>> >> >> >>>> >>>>> >> >>> >The volume shows no unhealed entries. I > >>> >also > >>> >>> >> >> >corrected some > >>> >>> >> >> >>>> >>>peer > >>> >>> >> >> >>>> >>>>> >> >>> >errors. > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >However, I am unable to copy disks, > >move > >>> >disks > >>> >>> >to > >>> >>> >> >> >another > >>> >>> >> >> >>>> >>>>> >domain, > >>> >>> >> >> >>>> >>>>> >> >>> >export > >>> >>> >> >> >>>> >>>>> >> >>> >disks, etc. It appears that the engine > >>> >cannot > >>> >>> >> >locate > >>> >>> >> >> >disks > >>> >>> >> >> >>>> >>>>> >properly > >>> >>> >> >> >>>> >>>>> >> >and > >>> >>> >> >> >>>> >>>>> >> >>> >I > >>> >>> >> >> >>>> >>>>> >> >>> >get storage I/O errors. > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >I have detached and removed the oVirt > >>> >Storage > >>> >>> >> >Domain. > >>> >>> >> >> >I > >>> >>> >> >> >>>> >>>>> >reimported > >>> >>> >> >> >>>> >>>>> >> >the > >>> >>> >> >> >>>> >>>>> >> >>> >domain and imported 2 VMs, But the VM > >>disks > >>> >>> >> >exhibit > >>> >>> >> >> >the > >>> >>> >> >> >>>> same > >>> >>> >> >> >>>> >>>>> >> >behaviour > >>> >>> >> >> >>>> >>>>> >> >>> >and > >>> >>> >> >> >>>> >>>>> >> >>> >won't run from the hard disk. > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >I get errors such as this > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >VDSM ov05 command > >>HSMGetAllTasksStatusesVDS > >>> >>> >> >failed: > >>> >>> >> >> >low > >>> >>> >> >> >>>> >>>level > >>> >>> >> >> >>>> >>>>> >Image > >>> >>> >> >> >>>> >>>>> >> >>> >copy > >>> >>> >> >> >>>> >>>>> >> >>> >failed: ("Command ['/usr/bin/qemu-img', > >>> >>> >'convert', > >>> >>> >> >> >'-p', > >>> >>> >> >> >>>> >>>'-t', > >>> >>> >> >> >>>> >>>>> >> >'none', > >>> >>> >> >> >>>> >>>>> >> >>> >'-T', 'none', '-f', 'raw', > >>> >>> >> >> >>>> >>>>> >> >>> > >>> >>> >>u'/rhev/data-center/mnt/glusterSD/192.168.24.18: > >>> >>> >> >> >>>> >>>>> >> >>> > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>>_images3/5fe3ad3f-2d21-404c-832e-4dc7318ca10d/images/3ea5afbd-0fe0-4c09-8d39-e556c66a8b3d/fe6eab63-3b22-4815-bfe6-4a0ade292510', > >>> >>> >> >> >>>> >>>>> >> >>> >'-O', 'raw', > >>> >>> >> >> >>>> >>>>> >> >>> >u'/rhev/data-center/mnt/192.168.24.13: > >>> >>> >> >> >>>> >>>>> >> >>> > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> > >>> >>> >> >> >>>> > >>> >>> >> >> > >>> >>> >> >> > >>> >>> >> > >>> >>> >> > >>> >>> > >>> >>> > >>> > >>> > > >>>>>>>>>>>_stor_import1/1ab89386-a2ba-448b-90ab-bc816f55a328/images/f707a218-9db7-4e23-8bbd-9b12972012b6/d6591ec5-3ede-443d-bd40-93119ca7c7d5'] > >>> >>> >> >> >>>> >>>>> >> >>> >failed with rc=1 out='' > >>> >>> >err=bytearray(b'qemu-img: > >>> >>> >> >> >error > >>> >>> >> >> >>>> >>>while > >>> >>> >> >> >>>> >>>>> >> >reading > >>> >>> >> >> >>>> >>>>> >> >>> >sector 135168: Transport endpoint is > >not > >>> >>> >> >> >>>> >>>connected\\nqemu-img: > >>> >>> >> >> >>>> >>>>> >> >error > >>> >>> >> >> >>>> >>>>> >> >>> >while > >>> >>> >> >> >>>> >>>>> >> >>> >reading sector 131072: Transport > >>endpoint > >>> >is > >>> >>> >not > >>> >>> >> >> >>>> >>>>> >> >connected\\nqemu-img: > >>> >>> >> >> >>>> >>>>> >> >>> >error while reading sector 139264: > >>> >Transport > >>> >>> >> >endpoint > >>> >>> >> >> >is > >>> >>> >> >> >>>> not > >>> >>> >> >> >>>> >>>>> >> >>> >connected\\nqemu-img: error while > >>reading > >>> >>> >sector > >>> >>> >> >> >143360: > >>> >>> >> >> >>>> >>>>> >Transport > >>> >>> >> >> >>>> >>>>> >> >>> >endpoint > >>> >>> >> >> >>>> >>>>> >> >>> >is not connected\\nqemu-img: error > >while > >>> >>> >reading > >>> >>> >> >> >sector > >>> >>> >> >> >>>> >>>147456: > >>> >>> >> >> >>>> >>>>> >> >>> >Transport > >>> >>> >> >> >>>> >>>>> >> >>> >endpoint is not connected\\nqemu-img: > >>error > >>> >>> >while > >>> >>> >> >> >reading > >>> >>> >> >> >>>> >>>sector > >>> >>> >> >> >>>> >>>>> >> >>> >155648: > >>> >>> >> >> >>>> >>>>> >> >>> >Transport endpoint is not > >>> >connected\\nqemu-img: > >>> >>> >> >error > >>> >>> >> >> >while > >>> >>> >> >> >>>> >>>>> >reading > >>> >>> >> >> >>>> >>>>> >> >>> >sector > >>> >>> >> >> >>>> >>>>> >> >>> >151552: Transport endpoint is not > >>> >>> >> >> >connected\\nqemu-img: > >>> >>> >> >> >>>> >>>error > >>> >>> >> >> >>>> >>>>> >while > >>> >>> >> >> >>>> >>>>> >> >>> >reading > >>> >>> >> >> >>>> >>>>> >> >>> >sector 159744: Transport endpoint is > >not > >>> >>> >> >> >connected\\n')",) > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >oVirt version is 4.3.82-1.el7 > >>> >>> >> >> >>>> >>>>> >> >>> >OS CentOS Linux release 7.7.1908 (Core) > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >The Gluster Cluster has been working > >>very > >>> >well > >>> >>> >> >until > >>> >>> >> >> >this > >>> >>> >> >> >>>> >>>>> >incident. > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >Please help. > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >Thank You > >>> >>> >> >> >>>> >>>>> >> >>> > > >>> >>> >> >> >>>> >>>>> >> >>> >Charles Williams > >>> >>> >> >> >>>> >>>>> >> >>> > >>> >>> >> >> >>>> >>>>> >> >> > >>> >>> >> >> >>>> >>>>> >> > >>> >>> >> >> >>>> >>>>> > >>> >>> >> >> >>>> >>>> > >>> >>> >> >> >>>> >> > >>> >>> >> >> >>>> > > >>> >>> >> >> >>>> _______________________________________________ > >>> >>> >> >> >>>> Users mailing list -- users@ovirt.org > >>> >>> >> >> >>>> To unsubscribe send an email to users-le...@ovirt.org > >>> >>> >> >> >>>> Privacy Statement: > >>> >https://www.ovirt.org/privacy-policy.html > >>> >>> >> >> >>>> oVirt Code of Conduct: > >>> >>> >> >> >>>> > >>> >https://www.ovirt.org/community/about/community-guidelines/ > >>> >>> >> >> >>>> List Archives: > >>> >>> >> >> >>>> > >>> >>> >> >> > > >>> >>> >> >> > >>> >>> >> > > >>> >>> >> > >>> >>> > > >>> >>> > >>> > > >>> > >> > > > https://lists.ovirt.org/archives/list/users@ovirt.org/message/YY3VUKEJLI7MRWXF627EHQAMH36UJ5BQ/ > >>> >>> >> >> >>>> > >>> >>> >> >> >>> > >>> >>> >> >> > >>> >>> >> > >>> >>> > >>> >> > >>> >
_______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/4W53PJ5TDQBY7QX4KURRE7WC2Q7KD5OH/