Hi team, I have 4 node cluster where in each node I configured 2 dedicated 10 gig NIC with dedicated subnet each ( NIC 1 = 10.10.10.0/24, NIC 2 = 10.10.20.0/24 ) and on the array side I configured 2 targets with 10.10.10.0 /24 & another 2 target with 10.10.20.0/24 subnet. without any errors I could check in all four paths and able to mount iscsi luns in all 4 nodes. However when i try to configure mutipathing at Data center level I could see all the paths but not the logical network, it stays empty although I configured logical network label for both NICs with dedicated names as ISCSI1 & ISCI2. these logical names visible and green at the host network level, no errors, they are just L2 IP config
Am I missing something here? what else I should do to enable multiplathing _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5VLH7CG5N5CTATV3SQBSKMOW33VQUJOU/
