Hi support, I have an issue on configure 10Gbps iSCSI port on HPE Gen 10 Server in oVirt 4.4.10. The behavior as below 1. Two 10Gbps ports are running on 10000Mb/s and up verified ethtool 2. configure iSCSI active-standby bonding (bond0) on oVirt manager. 3. When reboot the server, one of port is down (no carrier).
Temp. solution: I manually up the port by "nmcli conn up "port name" to resume bonding. Anyone know how to resolve it? Let me know for any information needed to investigate. I enclose my configuration as below. [root@ovrphv04 network-scripts]# cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: ens1f1np1 MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Peer Notification Delay (ms): 0 Slave Interface: ens1f1np1 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: f4:03:43:e7:da:38 Slave queue ID: 0 Slave Interface: ens4f1np1 MII Status: down Speed: Unknown Duplex: Unknown Link Failure Count: 0 Permanent HW addr: f4:03:43:e7:d7:68 Slave queue ID: 0 [root@ovrphv04 network-scripts]# ip link |grep ens1f1np1 7: ens1f1np1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0 state UP mode DEFAULT group default qlen 1000 [root@ovrphv04 network-scripts]# ip link |grep ens4f1np1 10: ens4f1np1: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 9000 qdisc mq master bond0 state DOWN mode DEFAULT group default qlen 1000 [root@ovrphv04 network-scripts]# cat ifcfg-ens1f1np1 TYPE=Ethernet MTU=9000 SRIOV_TOTAL_VFS=0 NAME=ens1f1np1 UUID=6072cd16-a45a-433e-bc9e-817557706fb2 DEVICE=ens1f1np1 ONBOOT=yes LLDP=no ETHTOOL_OPTS="speed 10000 duplex full autoneg on" MASTER_UUID=77e39d1b-cf14-406f-87f6-fe954fde40f0 MASTER=bond0 SLAVE=yes [root@ovrphv04 network-scripts]# cat ifcfg-ens4f1np1 TYPE=Ethernet MTU=9000 SRIOV_TOTAL_VFS=0 NAME=ens4f1np1 UUID=cf6b28e7-8fdb-472f-bbe9-0eecc95c5c3c DEVICE=ens4f1np1 ONBOOT=yes LLDP=no ETHTOOL_OPTS="speed 10000 duplex full autoneg on" MASTER_UUID=77e39d1b-cf14-406f-87f6-fe954fde40f0 MASTER=bond0 SLAVE=yes [root@ovrphv04 network-scripts]# cat ifcfg-bond0 BONDING_OPTS="mode=active-backup miimon=100" TYPE=Bond BONDING_MASTER=yes HWADDR= MTU=9000 PROXY_METHOD=none BROWSER_ONLY=no BOOTPROTO=none IPADDR=172.26.14.139 PREFIX=24 DEFROUTE=yes DHCP_CLIENT_ID=mac IPV4_FAILURE_FATAL=no IPV6_DISABLED=yes IPV6INIT=no DHCPV6_DUID=ll DHCPV6_IAID=mac IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=no NAME=bond0 UUID=77e39d1b-cf14-406f-87f6-fe954fde40f0 DEVICE=bond0 ONBOOT=yes AUTOCONNECT_SLAVES=yes LLDP=no _______________________________________________ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/privacy-policy.html oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RCLOZU6KZU5A3F525XKNBU5DMN3UZJ73/
