Hello,
Can you share these files with me from the node,
/etc/ansible/roles/gluster.features/roles/gluster_hci/tasks/hci_volumes.yml
& /etc/ansible/hc_wizard_inventory.yml
Thanks
On Wed, May 18, 2022 at 4:15 PM <b...@fastmail.com> wrote:
> I've run into the following issue with oVirt node on a single host using
> the single node hyperconverged wizard:
>
> TASK [gluster.features/roles/gluster_hci : Create the GlusterFS volumes]
> *******
> failed: [ovirt01.syd1.fqdn.com] (item={'volname': 'engine', 'brick':
> '/gluster_bricks/engine/engine', 'arbiter': 0}) => {"ansible_loop_var":
> "item", "changed": true, "cmd": "gluster volume create engine replica
> __omit_place_holder__2e79c54ac7e0f34125a3ed6965d6de550953524f transport
> tcp ovirt01.syd1.fqdn.com:/gluster_bricks/engine/engine force\n",
> "delta": "0:00:00.086880", "end": "2022-05-18 10:28:49.211929", "item":
> {"arbiter": 0, "brick": "/gluster_bricks/engine/engine", "volname":
> "engine"}, "msg": "non-zero return code", "rc": 1, "start": "2022-05-18
> 10:28:49.125049", "stderr": "replica count should be greater than
> 1\n\nUsage:\nvolume create <NEW-VOLNAME> [[replica <COUNT> [arbiter
> <COUNT>]]|[replica 2 thin-arbiter 1]] [disperse [<COUNT>]] [disperse-data
> <COUNT>] [redundancy <COUNT>] [transport <tcp|rdma|tcp,rdma>] <NEW-BRICK>
> <TA-BRICK>... [force]", "stderr_lines": ["replica count should be greater
> than 1", "", "Usage:", "volume create <NEW-VOLNAME> [[replica <COUNT>
> [arbiter
> <COUNT>]]|[replica 2 thin-arbiter 1]] [disperse [<COUNT>]]
> [disperse-data <COUNT>] [redundancy <COUNT>] [transport
> <tcp|rdma|tcp,rdma>] <NEW-BRICK> <TA-BRICK>... [force]"], "stdout": "",
> "stdout_lines": []}
> failed: [ovirt01.syd1.fqdn.com] (item={'volname': 'data', 'brick':
> '/gluster_bricks/data/data', 'arbiter': 0}) => {"ansible_loop_var": "item",
> "changed": true, "cmd": "gluster volume create data replica
> __omit_place_holder__2e79c54ac7e0f34125a3ed6965d6de550953524f transport
> tcp ovirt01.syd1.fqdn.com:/gluster_bricks/data/data force\n", "delta":
> "0:00:00.088490", "end": "2022-05-18 10:28:49.905458", "item": {"arbiter":
> 0, "brick": "/gluster_bricks/data/data", "volname": "data"}, "msg":
> "non-zero return code", "rc": 1, "start": "2022-05-18 10:28:49.816968",
> "stderr": "replica count should be greater than 1\n\nUsage:\nvolume create
> <NEW-VOLNAME> [[replica <COUNT> [arbiter <COUNT>]]|[replica 2 thin-arbiter
> 1]] [disperse [<COUNT>]] [disperse-data <COUNT>] [redundancy <COUNT>]
> [transport <tcp|rdma|tcp,rdma>] <NEW-BRICK> <TA-BRICK>... [force]",
> "stderr_lines": ["replica count should be greater than 1", "", "Usage:",
> "volume create <NEW-VOLNAME> [[replica <COUNT> [arbiter <COUNT>]]|[replic
> a 2 thin-arbiter 1]] [disperse [<COUNT>]] [disperse-data <COUNT>]
> [redundancy <COUNT>] [transport <tcp|rdma|tcp,rdma>] <NEW-BRICK>
> <TA-BRICK>... [force]"], "stdout": "", "stdout_lines": []}
> failed: [ovirt01.syd1.fqdn.com] (item={'volname': 'vmstore', 'brick':
> '/gluster_bricks/vmstore/vmstore', 'arbiter': 0}) => {"ansible_loop_var":
> "item", "changed": true, "cmd": "gluster volume create vmstore replica
> __omit_place_holder__2e79c54ac7e0f34125a3ed6965d6de550953524f transport
> tcp ovirt01.syd1.fqdn.com:/gluster_bricks/vmstore/vmstore force\n",
> "delta": "0:00:00.086626", "end": "2022-05-18 10:28:50.604015", "item":
> {"arbiter": 0, "brick": "/gluster_bricks/vmstore/vmstore", "volname":
> "vmstore"}, "msg": "non-zero return code", "rc": 1, "start": "2022-05-18
> 10:28:50.517389", "stderr": "replica count should be greater than
> 1\n\nUsage:\nvolume create <NEW-VOLNAME> [[replica <COUNT> [arbiter
> <COUNT>]]|[replica 2 thin-arbiter 1]] [disperse [<COUNT>]] [disperse-data
> <COUNT>] [redundancy <COUNT>] [transport <tcp|rdma|tcp,rdma>] <NEW-BRICK>
> <TA-BRICK>... [force]", "stderr_lines": ["replica count should be greater
> than 1", "", "Usage:", "volume create <NEW-VOLNAME> [[replica <COUNT>
> [arbiter <COUNT>]]|[replica 2 thin-arbiter 1]] [disperse [<COUNT>]]
> [disperse-data <COUNT>] [redundancy <COUNT>] [transport
> <tcp|rdma|tcp,rdma>] <NEW-BRICK> <TA-BRICK>... [force]"], "stdout": "",
> "stdout_lines": []}
>
> The only non-default settings I changed were the stripe size and number of
> disks. Following the steps here:
>
> https://www.ovirt.org/dropped/gluster-hyperconverged/chap-Single_node_hyperconverged.html
>
> Any ideas to work around this? I will be deploying to 6 nodes eventually
> but wanted to try out the engine before the rest of my hardware arrives :)
> _______________________________________________
> Users mailing list -- users@ovirt.org
> To unsubscribe send an email to users-le...@ovirt.org
> Privacy Statement: https://www.ovirt.org/privacy-policy.html
> oVirt Code of Conduct:
> https://www.ovirt.org/community/about/community-guidelines/
> List Archives:
> https://lists.ovirt.org/archives/list/users@ovirt.org/message/M3HBNBFFNUVZSI7P7ZNB6VMQEPMSWIID/
>
_______________________________________________
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/privacy-policy.html
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/KQUU76E7IWQMKYU25A5N2L32YEPM5VPY/
