Dear Qpid developers, We would like to implement the following topology:
Qpid JMS Sender ---> Artemis Broker ---> intermittent link ---> Edge ---> Interior Router ---> Edge ---> QPid JMS Receiver So instead of connecting the client directly to the edge router, we want to place a broker in between so that it can buffer messages in the case the link between the broker and the edge router is broken. Ideally we would like to get messages delivered to different receivers in the multicast mode after they leave the broker. We played a bit around with this config and is seems that we need to configure a specific address in all routers and annotate it as a waypoint. However, the desired solution would be that the router network stays generic, without particular addresses configured there. Could you give some tips whether this configuration can be implemented and if yes, then how? Thank you. ________________________________ Deze e-mail, inclusief eventuele bijlagen, is uitsluitend bestemd voor (gebruik door) de geadresseerde. De e-mail kan persoonlijke of vertrouwelijke informatie bevatten. Openbaarmaking, vermenigvuldiging, verspreiding en/of verstrekking van (de inhoud van) deze e-mail (en eventuele bijlagen) aan derden is uitdrukkelijk niet toegestaan. Indien u niet de bedoelde geadresseerde bent, wordt u vriendelijk verzocht degene die de e-mail verzond hiervan direct op de hoogte te brengen en de e-mail (en eventuele bijlagen) te vernietigen. Informatie vennootschap<http://www.ns.nl/emaildisclaimer>
