Hello Mr Valentin, Thank you for useful information about RF module. It is important for RIOT OS beginners to know the recommended parts.
I will buy at86rf233 and mrf24j40 module then try use them. Best regards, Dicek Bear. 2019年12月16日(月) 2:19 Benjamin Valentin <[email protected]>: > On Thu, 12 Dec 2019 17:24:34 +0900 > dicek bear <[email protected]> wrote: > > > Is it possible to connect RF board on the Nucleo-F446RE board ?. > > If possible, which is the best sutable RF board for Nucleo-F446RE > > board ?. Please inform me the RF board name, price and WEB-site to > > buy it. > > I don't know about any shields specific to the Morpho connectors on the > Nucleo boards, but you can use any module with a supported radio chip > if you wire it up yourself with a bunch of jumper wires. > > at86rf233 is a widely used and well supported chip, [1] has a cheap > module with it. > > Another option is a mrf24j40 module. Those are a bit older but work > well too. You can get them on ebay or AliExpress. > Just note that the mrf24j40ma variant doesn't have a build-in amplifier > so the signal will not be as good as with mrf24j40md/e (the e variant > requires an external antenna though) > > Best, > Benjamin > > [1] https://openlabs.co/store/Raspberry-Pi-802.15.4-radio > _______________________________________________ > users mailing list > [email protected] > https://lists.riot-os.org/mailman/listinfo/users >
_______________________________________________ users mailing list [email protected] https://lists.riot-os.org/mailman/listinfo/users
