On Sat, Dec 30, 2023, 9:45 AM Matt Wette <matt.we...@gmail.com> wrote:
> The build from git master worked (but first try I ran out of disk space: > needs > 10 G for the build. > That's good news that it built. We need to check the Users Guide to see if it has disk space recommendations. Did you see any? Personally, I always try to leave at least 20GB free in my working VMs. I think my current Rocky 9 VM started with 120GB for the OS, etc. --joel > Matt > > On 12/27/23 4:06 PM, Joel Sherrill wrote: > > Sounds like you are trying to do this by hand. The RTEMS Source Builder > (RSB) is the recommended way to build tools. See > https://docs.rtems.org/branches/master/user/index.html for detailed > instructions on the required packages on your host and how to use the RSB. > > The RSB fetches, patches, and builds the recommended tool versions. > > Not that you need it with the RSB building everything for you but the > target should be riscv-rtems6. > > On Wed, Dec 27, 2023, 5:43 PM Matt Wette <matt.we...@gmail.com> wrote: > >> Hi All, >> >> I'm working on compiling binutils, gcc, newlib and rtems-5.3 for >> RISC-V. What is appropriate target-spec? >> I've searched for specification hints but can't anything. Currently, I'm >> using riscv-rtems-elf but it seems >> newlib and rtems want to see a target spec with four fields and rtems is >> #3 or #4 in the list. >> Any references for this? >> >> for reference, using binutils-2.38, gcc-12.3.0 and newlib-4.3.0.20230120 >> I've gotten binutils, gcc and newlib to build (with patch to deal with >> above config issue on newlib). >> >> Matt >> >> >> _______________________________________________ >> users mailing list >> users@rtems.org >> http://lists.rtems.org/mailman/listinfo/users > > >
_______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users