Hi,
You could try with the openchangeclient to see if your server works,
because in some circumstance, Outlook change the server name and point
to another than yours :
Like on OpenChange site, you can do this on your OpenChange Server box :
- Create a profile (change according to your setup) :
/usr/local/samba/bin/mapiprofile --create -P testing -S -I
192.168.102.48 --domain=OC --realm=oc.local --username=JohnDoe
--password=openchange
- Verify that your profile is created :
/usr/local/samba/bin/mapiprofile --list
- Check your mailbox with OpenChange client :
/usr/local/samba/bin/openchangeclient --mailbox
Also, I noticed that sometimes, it is best to connect to the SOGo Web
interface just after the samba has been launch and next, connect with
Outlook.
Regards,
MARIADASSOU Romain
Le 11/12/2012 22:26, werdi4...@gmail.com a écrit :
Hi,
I have setup sogo (2.0_20121211-1.centos6) on centOS 6.3. The db is postgresql
8.4, imap daemon is dovecot 2.1.1 and the smtp daemon is postfix 2.6.6. The
server runs nice, all before mentioned parts reside on one machine,TLS is
enabled and works fine in Webmail and Thunderbird. However, the native Outlook
connection doesn't want to work...
Samba DNS implementation is setup, I can do:
host -t SRV _ldap._tcp.airwerk.net
_ldap._tcp.airwerk.net has SRV record 0 100 389 remote.airwerk.net.
host -t SRV _kerberos._udp.airwerk.net
_kerberos._udp.airwerk.net has SRV record 0 100 88 remote.airwerk.net.
Testing Samba is fine:
smbclient -L localhost -U dwerner
Enter dwerner's password:
Domain=[AIRWERK] OS=[Unix] Server=[Samba 4.0.0beta5-4.centos6.1]
Sharename Type Comment
--------- ---- -------
netlogon Disk
sysvol Disk
IPC$ IPC IPC Service
Domain=[AIRWERK] OS=[Unix] Server=[Samba 4.0.0beta5-4.centos6.1]
Server Comment
--------- -------
Workgroup Master
--------- -------
Console output of this request:
<snip>
using SPNEGO
Selected protocol [8][NT LANMAN 1.0]
Got NTLMSSP neg_flags=0x60088215
Got user=[dwerner] domain=[AIRWERK] workstation=[REMOTE] len1=24 len2=148
auth_check_password_send: Checking password for unmapped user
[AIRWERK]\[dwerner]@[REMOTE]
auth_check_password_send: mapped user is: [AIRWERK]\[dwerner]@[REMOTE]
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x60088215
ipv4:127.0.0.1:54056 closed connection to service IPC$
Terminating connection - 'NT_STATUS_END_OF_FILE'
Terminating connection - 'NT_STATUS_END_OF_FILE'
single_terminate: reason[NT_STATUS_END_OF_FILE]
using SPNEGO
Selected protocol [8][NT LANMAN 1.0]
Got NTLMSSP neg_flags=0x60088215
Got user=[dwerner] domain=[AIRWERK] workstation=[REMOTE] len1=24 len2=148
auth_check_password_send: Checking password for unmapped user
[AIRWERK]\[dwerner]@[REMOTE]
auth_check_password_send: mapped user is: [AIRWERK]\[dwerner]@[REMOTE]
NTLMSSP Sign/Seal - Initialising with flags:
Got NTLMSSP neg_flags=0x60088215
ipv4:127.0.0.1:60096 closed connection to service IPC$
Terminating connection - 'NT_STATUS_END_OF_FILE'
Terminating connection - 'NT_STATUS_END_OF_FILE'
single_terminate: reason[NT_STATUS_END_OF_FILE]
Terminating connection - 'wbsrv_call_loop: tstream_read_pdu_blob_recv() -
NT_STATUS_CONNECTION_DISCONNECTED'
single_terminate: reason[wbsrv_call_loop: tstream_read_pdu_blob_recv() -
NT_STATUS_CONNECTION_DISCONNECTED]
Terminating connection - 'NT_STATUS_CONNECTION_DISCONNECTED'
</snip>
This is the console output when samba is started like: samba -d3 -i -M single
<snip>
lpcfg_load: refreshing parameters from /etc/samba4/smb.conf
params.c:pm_process() - Processing configuration file "/etc/samba4/smb.conf"
samba version 4.0.0beta5-4.centos6.1 started.
Copyright Andrew Tridgell and the Samba Team 1992-2012
GENSEC backend 'gssapi_spnego' registered
GENSEC backend 'gssapi_krb5' registered
GENSEC backend 'gssapi_krb5_sasl' registered
GENSEC backend 'sasl-DIGEST-MD5' registered
GENSEC backend 'schannel' registered
GENSEC backend 'spnego' registered
GENSEC backend 'ntlmssp' registered
GENSEC backend 'krb5' registered
GENSEC backend 'fake_gssapi_krb5' registered
NTPTR backend 'simple_ldb'
NTVFS backend 'default' for type 1 registered
NTVFS backend 'posix' for type 1 registered
NTVFS backend 'unixuid' for type 1 registered
NTVFS backend 'unixuid' for type 3 registered
NTVFS backend 'unixuid' for type 2 registered
NTVFS backend 'cifs' for type 1 registered
NTVFS backend 'smb2' for type 1 registered
NTVFS backend 'simple' for type 1 registered
NTVFS backend 'cifsposix' for type 1 registered
NTVFS backend 'default' for type 3 registered
NTVFS backend 'default' for type 2 registered
NTVFS backend 'nbench' for type 1 registered
PROCESS_MODEL 'single' registered
PROCESS_MODEL 'standard' registered
PROCESS_MODEL 'prefork' registered
PROCESS_MODEL 'onefork' registered
AUTH backend 'sam' registered
AUTH backend 'sam_ignoredomain' registered
AUTH backend 'anonymous' registered
AUTH backend 'winbind' registered
AUTH backend 'winbind_wbclient' registered
AUTH backend 'name_to_ntstatus' registered
AUTH backend 'unix' registered
SHARE backend [classic] registered.
SHARE backend [ldb] registered.
ldb_wrap open of privilege.ldb
samba: using 'single' process model
DCERPC endpoint server 'rpcecho' registered
DCERPC endpoint server 'epmapper' registered
DCERPC endpoint server 'remote' registered
DCERPC endpoint server 'srvsvc' registered
DCERPC endpoint server 'wkssvc' registered
DCERPC endpoint server 'unixinfo' registered
DCERPC endpoint server 'samr' registered
DCERPC endpoint server 'winreg' registered
DCERPC endpoint server 'netlogon' registered
DCERPC endpoint server 'dssetup' registered
DCERPC endpoint server 'lsarpc' registered
DCERPC endpoint server 'backupkey' registered
DCERPC endpoint server 'spoolss' registered
DCERPC endpoint server 'drsuapi' registered
DCERPC endpoint server 'browser' registered
DCERPC endpoint server 'eventlog6' registered
DCERPC endpoint server 'dnsserver' registered
DCERPC endpoint server 'exchange_emsmdb' registered
DCERPC endpoint server 'exchange_nsp' registered
DCERPC endpoint server 'exchange_ds_rfr' registered
DCERPC endpoint server 'mapiproxy' registered
MAPIPROXY module 'downgrade' registered
MAPIPROXY module 'pack' registered
MAPIPROXY module 'dummy' registered
MAPIPROXY module 'cache' registered
MAPIPROXY server 'exchange_ds_rfr' registered
MAPIPROXY server 'exchange_nsp' registered
MAPIPROXY server 'exchange_emsmdb' registered
MAPIPROXY server mode enabled
MAPIPROXY proxy mode disabled
mapiproxy_server_load 'exchange_nsp' (OpenChange NSPI server)
dcesrv_exchange_nsp_init
mapiproxy_server_load 'exchange_emsmdb' (OpenChange EMSMDB server)
mapiproxy_server_load 'exchange_ds_rfr' (OpenChange RFR server)
dreplsrv_partition[CN=Configuration,DC=airwerk,DC=net] loaded
dreplsrv_partition[CN=Schema,CN=Configuration,DC=airwerk,DC=net] loaded
dreplsrv_partition[DC=airwerk,DC=net] loaded
dreplsrv_partition[DC=ForestDnsZones,DC=airwerk,DC=net] loaded
dreplsrv_partition[DC=DomainDnsZones,DC=airwerk,DC=net] loaded
ldb_wrap open of secrets.ldb
ldb_wrap open of idmap.ldb
kccsrv_partition[DC=airwerk,DC=net] loaded
kccsrv_partition[CN=Configuration,DC=airwerk,DC=net] loaded
kccsrv_partition[CN=Schema,CN=Configuration,DC=airwerk,DC=net] loaded
kccsrv_partition[DC=DomainDnsZones,DC=airwerk,DC=net] loaded
kccsrv_partition[DC=ForestDnsZones,DC=airwerk,DC=net] loaded
Calling DNS name update script
Calling SPN name update script
Child /usr/sbin/samba_dnsupdate exited with status 0 - Success
Completed DNS update check OK
Child /usr/sbin/samba_spnupdate exited with status 0 - Success
Completed SPN update check OK
Registered REMOTE<00> with 192.168.40.1 on interface 192.168.40.255
Registered REMOTE<03> with 192.168.40.1 on interface 192.168.40.255
Registered REMOTE<20> with 192.168.40.1 on interface 192.168.40.255
Registered AIRWERK<1b> with 192.168.40.1 on interface 192.168.40.255
Registered AIRWERK<1c> with 192.168.40.1 on interface 192.168.40.255
Registered AIRWERK<00> with 192.168.40.1 on interface 192.168.40.255
</snip>
I have added a line in the hosts file of the client which is like:
192.168.40.1 remote.airwerk.net autodiscover.airwerk.net
When trying to connect Outlook2007 to the host remote.airwerk.net there is no
response at all, the server does not at all react on the client inquiry - Are
there any client (Windows Vista) specific settings necessary I might have
forgotten? I'm fully stuck.
Best regards
Dirk
--
users@sogo.nu
https://inverse.ca/sogo/lists
