Hello,
2015-02-20 7:46 GMT-05:00 Christian Mack <christian.m...@uni-konstanz.de>: > Hello > > Did you upgrade from a pre SOGo 2.0.5 installation? > If yes, did you do the steps described in the "SOGo Installation Guide" > chapter "Upgrading"? > > No, it's a fresh new install on Debian Wheezy (64 bits) . My production server is an old Debian Squeeze (32 bits). I made the folder /home/sogo because Sogo floods my log if it doesn't exist. The file .GNUstepDefaults is empty (some lines created by SOGo). The empty .GNUstepDefaults overwrites ALL sogo.conf ? not some parameters (in the case it's not an empty file) ? I read the "chapter 10 - Upgrading" and nothing to do ... Kind regards, -- Louis-Philippe Gauthier > I too had problems of this kind, before doing so. > That was, because the old GNUstep defaults were still in effect. > You can check this with sogo-tool. > /usr/sbin/sogo-tool dump-defaults > > This should deliver an empty configuration. > If not, that is your problem. > > > Kind regards, > Christian Mack > > Am 2015-02-18 um 19:26 schrieb Louis-Philippe: > > Hi, > > > > Before, I had a lot of "sogod[2726] Defaults path > > '/home/sogo/GNUstep/Defaults' does not exist - failed to create it." > > > > So, I created /home/sogo and the error message change to " [ERROR] > |SOGo| > > No value specified for 'SOGoProfileURL'". > > > > But it is in the file /etc/sogo/sogo.conf. > > > > It seems that it doesn't read the file in /etc/sogo/ . > > > > I have something to do for forcing the use of /etc/sogo/sogo.conf instead > > of /home/sogo/GNUstep/Defaults/.... ? > > > > Thanks > > > > > > 2015-02-18 11:12 GMT-05:00 Carl Byington <c...@five-ten-sg.com>: > > > > > >>>> In sogo.log, all time are UTC instead of local time. We are UTC -0500 > >>>> and I > >>>> have in /etc/sogo/sogo.conf: "SOGoTimeZone = America/Montreal;" > >>>> Why ? I made a dpkg-reconfigure tzdata and timezone is well > >>>> configured. > >>>> Did I miss something ? > > > > At least on Centos, sogo seems to ignore the zone in > > /etc/sogo/sogo.conf, and instead uses the $ZONE setting from > > /etc/sysconfig/clock. On Centos, that $ZONE value may contain embedded > > blanks, which then causes sogo to use UTC. > > > > http://www.five-ten-sg.com/mapper/blog/openchange > > > > > >> > >> > >> -- > >> users@sogo.nu > >> https://inverse.ca/sogo/lists > >> > > > > > > > > -- > Christian Mack > Universität Konstanz > Kommunikations-, Informations-, Medienzentrum (KIM) > Abteilung Basisdienste > 78457 Konstanz > +49 7531 88-4416 > > -- users@sogo.nu https://inverse.ca/sogo/lists
