Dear Martin and David,
Thanks a lot for your help.
I am a total newbie with firewalls.
So what i did was the following:
<code>
[EMAIL PROTECTED] rohitsz]# service network restart
Shutting down interface eth0: [ OK ]
Shutting down loopback interface: [ OK ]
Setting network parameters: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface sit0: [ OK ]
Bringing up interface ppp0: pppd: unrecognized option 'No'
pppd version 2.4.3
Usage: pppd [ options ], where options are:
<device> Communicate over the named device
<speed> Set the baud rate to <speed>
<loc>:<rem> Set the local and/or remote interface IP
addresses. Either one may be omitted.
asyncmap <n> Set the desired async map to hex <n>
auth Require authentication from peer
connect <p> Invoke shell command <p> to set up the serial line
crtscts Use hardware RTS/CTS flow control
defaultroute Add default route through interface
file <f> Take options from file <f>
modem Use modem control lines
mru <n> Set MRU value to <n> for negotiation
See pppd(8) for more options.
[FAILED]
[EMAIL PROTECTED] rohitsz]# ping 127.0.0.1
PING 127.0.0.1 (127.0.0.1) 56(84) bytes of data.
64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.086 ms
64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.062 ms
64 bytes from 127.0.0.1: icmp_seq=3 ttl=64 time=0.063 ms
64 bytes from 127.0.0.1: icmp_seq=4 ttl=64 time=0.063 ms
64 bytes from 127.0.0.1: icmp_seq=5 ttl=64 time=0.062 ms
64 bytes from 127.0.0.1: icmp_seq=6 ttl=64 time=0.065 ms
64 bytes from 127.0.0.1: icmp_seq=7 ttl=64 time=0.060 ms
64 bytes from 127.0.0.1: icmp_seq=8 ttl=64 time=0.063 ms
64 bytes from 127.0.0.1: icmp_seq=9 ttl=64 time=0.062 ms
--- 127.0.0.1 ping statistics ---
9 packets transmitted, 9 received, 0% packet loss, time 7999ms
rtt min/avg/max/mdev = 0.060/0.065/0.086/0.008 ms
[EMAIL PROTECTED] rohitsz]# /usr/local/tomcat/bin/startup.sh
Using CATALINA_BASE: /usr/local/tomcat
Using CATALINA_HOME: /usr/local/tomcat
Using CATALINA_TMPDIR: /usr/local/tomcat/temp
Using JRE_HOME: /usr/java/jdk1.5.0_06
[EMAIL PROTECTED] rohitsz]#
</code>
And so, ping worked :-)
Also when i did http://localhost:8080 .. it also worked!
I am absolutely thrilled at the output but i have no clue how it happened!
could anyone explain..
regards,
rohit.
NAMASTE, i honour the spirit in you which is also in me.
```````````````````````````````````````````````````````
http://www.geocities.com/rohitsz2
http://rohitsz.blogspot.com
---------------------------------
Do you Yahoo!?
Next-gen email? Have it all with the all-new Yahoo! Mail Beta.
