* Nick Berry <[email protected]> [2012-02-13 08:51:56 +0000]: > attaching your records.config and remap.config would help, too.
-- Aleksey Kluchnikov
# # # Process Records Config File # # <RECORD-TYPE> <NAME> <TYPE> <VALUE (till end of line)> # # RECORD-TYPE: CONFIG, LOCAL # NAME: name of variable # TYPE: INT, STRING, FLOAT # VALUE: Initial value for record # # # *NOTE*: All options covered in this file should be documented in the # administration guide or the addendum: # # ############################################################################## # # System Variables # ############################################################################## CONFIG proxy.config.proxy_name STRING castle.ximad.com CONFIG proxy.config.config_dir STRING etc/trafficserver CONFIG proxy.config.proxy_binary_opts STRING -M CONFIG proxy.config.env_prep STRING example_prep.sh CONFIG proxy.config.temp_dir STRING /tmp CONFIG proxy.config.alarm_email STRING nobody CONFIG proxy.config.syslog_facility STRING LOG_DAEMON CONFIG proxy.config.output.logfile STRING traffic.out CONFIG proxy.config.snapshot_dir STRING snapshots CONFIG proxy.config.system.mmap_max INT 2097152 ############################################################################## # # Main threads configuration (worker threads). Also see configurations for # SSL threads, disk I/O threads and task threads in their respective areas. # ############################################################################## CONFIG proxy.config.exec_thread.autoconfig INT 1 CONFIG proxy.config.exec_thread.autoconfig.scale FLOAT 1.5 CONFIG proxy.config.exec_thread.limit INT 2 CONFIG proxy.config.accept_threads INT 1 ############################################################################## # # Local Manager # ############################################################################## CONFIG proxy.config.admin.admin_user STRING admin CONFIG proxy.config.admin.number_config_bak INT 3 CONFIG proxy.config.admin.user_id STRING nobody ############################################################################## # # Process Manager # ############################################################################## CONFIG proxy.config.admin.autoconf_port INT 8083 CONFIG proxy.config.process_manager.mgmt_port INT 8084 ############################################################################## # # In order to only bind a specific IP, use the following config, as in # the example below. Note # ############################################################################## #LOCAL proxy.local.incoming_ip_to_bind STRING 192.168.101.17 ############################################################################## # # Alarm Configuration # ############################################################################## # execute alarm as "<abs_path>/<bin> "<MSG_STRING_FROM_PROXY>"" CONFIG proxy.config.alarm.bin STRING example_alarm_bin.sh CONFIG proxy.config.alarm.abs_path STRING NULL ############################################################################## # # HTTP Engine # ############################################################################## ########## # basics # ########## # The main server_port is listed here, other server ports is a # string of ports, separated by whitespace. The port attributes # should be set to X(default behavior). For example... # server_other_ports STRING 1234:X 12345:X CONFIG proxy.config.http.server_port INT 80 CONFIG proxy.config.http.server_port_attr STRING X # to enable IPv6 listening on port 8080: # CONFIG proxy.config.http.server_other_ports STRING 8080:X6 CONFIG proxy.config.http.server_other_ports STRING NULL CONFIG proxy.config.http.connect_ports STRING 443 563 CONFIG proxy.config.http.insert_request_via_str INT 1 CONFIG proxy.config.http.insert_response_via_str INT 0 CONFIG proxy.config.http.verbose_via_str INT 2 CONFIG proxy.config.http.response_server_enabled INT 1 CONFIG proxy.config.http.enable_url_expandomatic INT 0 CONFIG proxy.config.http.no_dns_just_forward_to_parent INT 0 CONFIG proxy.config.http.uncacheable_requests_bypass_parent INT 1 CONFIG proxy.config.http.keep_alive_enabled_in INT 1 CONFIG proxy.config.http.keep_alive_enabled_out INT 1 CONFIG proxy.config.http.chunking_enabled INT 1 # send http11 requests: # 0 - Never # 1 - Always # 2 - if the server has returned http1.1 before # 3 - if the client request is 1.1 & the server # has returned 1.1 before CONFIG proxy.config.http.send_http11_requests INT 1 CONFIG proxy.config.http.share_server_sessions INT 1 CONFIG proxy.config.http.origin_server_pipeline INT 1 CONFIG proxy.config.http.user_agent_pipeline INT 8 ########################## # HTTP referer filtering # ########################## CONFIG proxy.config.http.referer_filter INT 0 CONFIG proxy.config.http.referer_format_redirect INT 0 CONFIG proxy.config.http.referer_default_redirect STRING http://www.example.com/ ############################## # parent proxy configuration # ############################## CONFIG proxy.config.http.parent_proxy_routing_enable INT 0 CONFIG proxy.config.http.parent_proxy.retry_time INT 300 # Parent fail threshold is the number of request that must # fail within the retry window for the parent to be marked # down CONFIG proxy.config.http.parent_proxy.fail_threshold INT 10 CONFIG proxy.config.http.parent_proxy.total_connect_attempts INT 4 CONFIG proxy.config.http.parent_proxy.per_parent_connect_attempts INT 2 CONFIG proxy.config.http.parent_proxy.connect_attempts_timeout INT 30 CONFIG proxy.config.http.forward.proxy_auth_to_parent INT 0 ################################### # HTTP connection timeouts (secs) # ################################### # out: proxy -> origin server connection # in : ua -> proxy connection CONFIG proxy.config.http.keep_alive_no_activity_timeout_in INT 115 CONFIG proxy.config.http.keep_alive_no_activity_timeout_out INT 120 CONFIG proxy.config.http.transaction_no_activity_timeout_in INT 30 CONFIG proxy.config.http.transaction_no_activity_timeout_out INT 30 CONFIG proxy.config.http.transaction_active_timeout_in INT 900 CONFIG proxy.config.http.transaction_active_timeout_out INT 0 CONFIG proxy.config.http.accept_no_activity_timeout INT 120 CONFIG proxy.config.http.background_fill_active_timeout INT 60 CONFIG proxy.config.http.background_fill_completed_threshold FLOAT 0.5 ################################## # origin server connect attempts # ################################## CONFIG proxy.config.http.connect_attempts_max_retries INT 6 CONFIG proxy.config.http.connect_attempts_max_retries_dead_server INT 3 CONFIG proxy.config.http.connect_attempts_rr_retries INT 3 CONFIG proxy.config.http.connect_attempts_timeout INT 30 CONFIG proxy.config.http.post_connect_attempts_timeout INT 1800 CONFIG proxy.config.http.down_server.cache_time INT 300 CONFIG proxy.config.http.down_server.abort_threshold INT 10 ################################## # congestion control # ################################## CONFIG proxy.config.http.congestion_control.enabled INT 0 ############################# # negative response caching # ############################# CONFIG proxy.config.http.negative_caching_enabled INT 0 CONFIG proxy.config.http.negative_caching_lifetime INT 1800 ######################### # proxy users variables # ######################### CONFIG proxy.config.http.anonymize_remove_from INT 0 CONFIG proxy.config.http.anonymize_remove_referer INT 0 CONFIG proxy.config.http.anonymize_remove_user_agent INT 0 CONFIG proxy.config.http.anonymize_remove_cookie INT 0 CONFIG proxy.config.http.anonymize_remove_client_ip INT 0 CONFIG proxy.config.http.anonymize_insert_client_ip INT 1 CONFIG proxy.config.http.anonymize_other_header_list STRING NULL CONFIG proxy.config.http.append_xforwards_header INT 0 CONFIG proxy.config.http.insert_squid_x_forwarded_for INT 1 ############ # security # ############ CONFIG proxy.config.http.push_method_enabled INT 0 # ################################### # # HTTP Quick filtering (security) # # ################################### # This is dedicated and very specific 'HTTP method' filter. # Note: If method does not match, filtering will be skipped. # bits 15-0 - HTTP method mask # 0x0000 - Any possible HTTP method (or you can use 0xFFFF) # 0x0001 - CONNECT # 0x0002 - DELETE # 0x0004 - GET # 0x0008 - HEAD # 0x0010 - ICP_QUERY # 0x0020 - OPTIONS # 0x0040 - POST # 0x0080 - PURGE # 0x0100 - PUT # 0x0200 - TRACE # 0x0400 - PUSH # bits 18-16 - IP address type # reserved # bits 30-19 - reserved # bit 31 - Action (allow=1, deny=0), leave at zero # Note: if 'proxy.config.http.quick_filter.mask' is equal 0, there is no 'quick http filtering' at all # # The default (0x482 or 1154) denies all PUSH, PURGE and DELETE requests (except from 127.0.0.1) CONFIG proxy.config.http.quick_filter.mask INT 0x482 ################# # cache control # ################# CONFIG proxy.config.http.cache.http INT 1 CONFIG proxy.config.http.cache.ignore_client_no_cache INT 1 CONFIG proxy.config.http.cache.ims_on_client_no_cache INT 1 CONFIG proxy.config.http.cache.ignore_server_no_cache INT 0 CONFIG proxy.config.http.cache.ignore_client_cc_max_age INT 0 CONFIG proxy.config.http.normalize_ae_gzip INT 0 # cache responses to cookies has 5 options: # 0 - do not cache any responses to cookies # 1 - cache for any content-type # 2 - cache only for image types # 3 - cache for all but text content-types # 4 - cache for all but text content-types except OS response # without "Set-Cookie" or with "Cache-Control: public" CONFIG proxy.config.http.cache.cache_responses_to_cookies INT 1 CONFIG proxy.config.http.cache.ignore_authentication INT 0 CONFIG proxy.config.http.cache.cache_urls_that_look_dynamic INT 1 CONFIG proxy.config.http.cache.enable_default_vary_headers INT 0 # when_to_revalidate has 5 options: # 0 - default. use use cache directives or heuristic # 1 - stale if heuristic # 2 - always stale (always revalidate) # 3 - never stale # 4 - always revalidate if request is conditional, else default is used CONFIG proxy.config.http.cache.when_to_revalidate INT 0 # Some old MSIE browsers don't send no-cache headers to # reverse proxies or transparent caches, this variable controls # when to add no-cache headers to MSIE requests: # -1 - no-cache is never added, stats are not updated # 0 - default; no-cache not added to MSIE requests # 1 - no-cache added to IMS MSIE requests # 2 - no-cache added to all MSIE requests CONFIG proxy.config.http.cache.when_to_add_no_cache_to_msie_requests INT -1 # required headers: three options: # 0 - No required headers to make document cachable # 1 - "Last-Modified:", "Expires:", or "Cache-Control: max-age" required # 2 - explicit lifetime required, "Expires:" or "Cache-Control: max-age" CONFIG proxy.config.http.cache.required_headers INT 2 CONFIG proxy.config.http.cache.max_stale_age INT 604800 CONFIG proxy.config.http.cache.range.lookup INT 1 ######################## # heuristic expiration # ######################## CONFIG proxy.config.http.cache.heuristic_min_lifetime INT 3600 CONFIG proxy.config.http.cache.heuristic_max_lifetime INT 86400 CONFIG proxy.config.http.cache.heuristic_lm_factor FLOAT 0.10 CONFIG proxy.config.http.cache.fuzz.time INT 240 CONFIG proxy.config.http.cache.fuzz.probability FLOAT 0.005 ######################################### # dynamic content & content negotiation # ######################################### CONFIG proxy.config.http.cache.vary_default_text STRING NULL CONFIG proxy.config.http.cache.vary_default_images STRING NULL CONFIG proxy.config.http.cache.vary_default_other STRING NULL ############################################################## # The HTTP stats are expensive, turn off you don't need them # ############################################################## CONFIG proxy.config.http.enable_http_stats INT 1 ############################################################################## # # Customizable User Response Pages # ############################################################################## # 0 - turn off customizable user response pages # 1 - enable customizable user response pages in only the "default" directory # 2 - enable language-targeted user response pages CONFIG proxy.config.body_factory.enable_customizations INT 0 CONFIG proxy.config.body_factory.enable_logging INT 0 # 0 - never suppress generated responses # 1 - always suppress generated responses # 2 - suppress responses for intercepted traffic CONFIG proxy.config.body_factory.response_suppression_mode INT 0 ############################################################################## # # Net Subsystem # ############################################################################## CONFIG proxy.config.net.connections_throttle INT 30000 # Enable defer accept / accept filtering. On Linux, this is a timeout, sec. CONFIG proxy.config.net.defer_accept INT 1 ############################################################################## # # Cluster Subsystem # ############################################################################## # cluster type requires restart to change # 1 is full clustering, 2 is mgmt only, 3 is no clustering LOCAL proxy.local.cluster.type INT 3 CONFIG proxy.config.cluster.cluster_port INT 8086 CONFIG proxy.config.cluster.rsport INT 8088 CONFIG proxy.config.cluster.mcport INT 8089 CONFIG proxy.config.cluster.mc_group_addr STRING 224.0.1.37 CONFIG proxy.config.cluster.mc_ttl INT 1 CONFIG proxy.config.cluster.log_bogus_mc_msgs INT 1 CONFIG proxy.config.cluster.ethernet_interface STRING re0 ############################################################################## # # Cache # ############################################################################## CONFIG proxy.config.cache.permit.pinning INT 0 # default the ram cache size to AUTO_SIZE (-1) based on cache size # (approximately 1 MB of RAM cache per GB of disk cache) # alternatively, set to a fixed value such as 20971520 (20MB) CONFIG proxy.config.cache.ram_cache.size INT -1 CONFIG proxy.config.cache.ram_cache_cutoff INT 4194304 # Replacement algorithm # 0 : Clocked Least Frequently Used by Size (CLFUS) w/optional compression # 1 : LRU w/o optional compression - trivially simple CONFIG proxy.config.cache.ram_cache.algorithm INT 0 # Compress the content of the ram cache: # 0 : no compression # 1 : fastlz (extremely fast, relatively low compression) # 2 : libz (moderate speed, reasonable compression) # 3 : liblzma (very slow, high compression) # NOTE: compression runs on task threads. To use more cores for # compression, increase proxy.config.task_threads. CONFIG proxy.config.cache.ram_cache.compress INT 0 # The maximum number of alternates that are allowed for any given URL. # It is not possible to strictly enforce this if the variable # 'proxy.config.cache.vary_on_user_agent' is set to 1. # The default value for 'proxy.config.cache.vary_on_user_agent' is 0. # (0 disables the maximum number of alts check) CONFIG proxy.config.cache.limits.http.max_alts INT 5 # The target size of a contiguous fragment on disk. # Acceptable values are powers of 2, e.g. 65536, 131072, 262144, 524288, 1048576, 2097152. # Larger could waste memory on slow connections, smaller could waste seeks. CONFIG proxy.config.cache.target_fragment_size INT 1048576 # The maximum size of a document that will be stored in the cache. # (0 disables the maximum document size check) CONFIG proxy.config.cache.max_doc_size INT 0 # enable the cache to read from an object while it is being added to the cache CONFIG proxy.config.cache.enable_read_while_writer INT 0 # This controls how many objects (average) the disk caches can hold, and # how much memory it'll consume for the directory structure. CONFIG proxy.config.cache.min_average_object_size INT 8000 # How many I/O threads to allocate per disk (spindle). Be aware that RAID # disks would show up to TS as a single spindle. CONFIG proxy.config.cache.threads_per_disk INT 8 # Time (in ms) to delay until retrying to acquire a cache lock. Setting # this low can reduce latencies in some cases, but can consume more CPU. # If you experience CPU spinning, try increasing this setting. CONFIG proxy.config.cache.mutex_retry_delay INT 2 ############################################################################## # # DNS # ############################################################################## CONFIG proxy.config.dns.search_default_domains INT 1 CONFIG proxy.config.dns.splitDNS.enabled INT 0 CONFIG proxy.config.dns.max_dns_in_flight INT 2048 # Additional URL expansions for http DNS lookup CONFIG proxy.config.dns.url_expansions STRING NULL CONFIG proxy.config.dns.round_robin_nameservers INT 0 CONFIG proxy.config.dns.nameservers STRING NULL CONFIG proxy.config.dns.resolv_conf STRING /etc/resolv.conf # This provides additional resilience against DNS forgery, particularly in # forward or transparent proxies, but requires that the resolver populates # the queries section of the response properly. CONFIG proxy.config.dns.validate_query_name INT 0 ############################################################################## # # HostDB # ############################################################################## # in entries, may not be changed while running # note that in order to increase hostdb.size, hostdb.storage_size should # also be increase. These are best guesses, you will have to monitor this. CONFIG proxy.config.hostdb.size INT 120000 CONFIG proxy.config.hostdb.storage_size INT 32M # ttl modes: # 0 = obey # 1 = ignore # 2 = min(X,ttl) # 3 = max(X,ttl) CONFIG proxy.config.hostdb.ttl_mode INT 0 # in minutes... CONFIG proxy.config.hostdb.timeout INT 1440 # round-robin addresses for single clients # (can cause authentication problems) CONFIG proxy.config.hostdb.strict_round_robin INT 0 ############################################################################## # # Logging Config # ############################################################################## # possible values for logging_enabled: # 0: no logging at all # 1: log errors only # 2: log transactions only # 3: full logging (errors + transactions) CONFIG proxy.config.log.logging_enabled INT 3 CONFIG proxy.config.log.max_secs_per_buffer INT 5 CONFIG proxy.config.log.max_space_mb_for_logs INT 25000 CONFIG proxy.config.log.max_space_mb_for_orphan_logs INT 25 CONFIG proxy.config.log.max_space_mb_headroom INT 1000 CONFIG proxy.config.log.hostname STRING localhost CONFIG proxy.config.log.logfile_dir STRING var/log/trafficserver CONFIG proxy.config.log.logfile_perm STRING rw-r--r-- CONFIG proxy.config.log.custom_logs_enabled INT 0 CONFIG proxy.config.log.squid_log_enabled INT 1 CONFIG proxy.config.log.squid_log_is_ascii INT 0 CONFIG proxy.config.log.squid_log_name STRING squid CONFIG proxy.config.log.squid_log_header STRING NULL CONFIG proxy.config.log.common_log_enabled INT 0 CONFIG proxy.config.log.common_log_is_ascii INT 1 CONFIG proxy.config.log.common_log_name STRING common CONFIG proxy.config.log.common_log_header STRING NULL CONFIG proxy.config.log.extended_log_enabled INT 0 CONFIG proxy.config.log.extended_log_is_ascii INT 0 CONFIG proxy.config.log.extended_log_name STRING extended CONFIG proxy.config.log.extended_log_header STRING NULL CONFIG proxy.config.log.extended2_log_enabled INT 0 CONFIG proxy.config.log.extended2_log_is_ascii INT 1 CONFIG proxy.config.log.extended2_log_name STRING extended2 CONFIG proxy.config.log.extended2_log_header STRING NULL CONFIG proxy.config.log.separate_icp_logs INT 0 CONFIG proxy.config.log.separate_host_logs INT 0 # Log collation allows you to do "remote logging" LOCAL proxy.local.log.collation_mode INT 0 CONFIG proxy.config.log.collation_host STRING NULL CONFIG proxy.config.log.collation_port INT 8085 CONFIG proxy.config.log.collation_secret STRING foobar CONFIG proxy.config.log.collation_host_tagged INT 0 CONFIG proxy.config.log.collation_retry_sec INT 5 CONFIG proxy.config.log.rolling_enabled INT 1 CONFIG proxy.config.log.rolling_interval_sec INT 86400 CONFIG proxy.config.log.rolling_offset_hr INT 0 CONFIG proxy.config.log.rolling_size_mb INT 10 CONFIG proxy.config.log.auto_delete_rolled_files INT 1 CONFIG proxy.config.log.sampling_frequency INT 1 ############################################################################## # # Reverse Proxy # ############################################################################## CONFIG proxy.config.reverse_proxy.enabled INT 1 CONFIG proxy.config.header.parse.no_host_url_redirect STRING NULL ############################################################################## # # URL Remap Rules # ############################################################################## CONFIG proxy.config.url_remap.default_to_server_pac INT 0 CONFIG proxy.config.url_remap.default_to_server_pac_port INT -1 # To enable forward proxy, you must turn off remap_required CONFIG proxy.config.url_remap.remap_required INT 1 # Pristine host header is the "original" (request) header. Make sure your # origin expects them in reverse proxy. CONFIG proxy.config.url_remap.pristine_host_hdr INT 1 ############################################################################## # # SSL Termination # ############################################################################## # proxy.config.ssl.enabled should be: # 0 - none # 1 - SSL enabled CONFIG proxy.config.ssl.enabled INT 0 # The number of SSL threads is a multiplier of number of CPUs and # proxy.config.exec_thread.autoconfig.scale by default. You can # override that here (set it to a non-zero value). CONFIG proxy.config.ssl.number.threads INT 0 # The following three variables can be # set to 0 to disable SSLv2, SSLv3, and/or TLSv1. # SSLv2 is disabled by default for security concern. CONFIG proxy.config.ssl.SSLv2 INT 0 CONFIG proxy.config.ssl.SSLv3 INT 1 CONFIG proxy.config.ssl.TLSv1 INT 1 # The following two variables control the Cipher Suite traffic Server # uses for HTTPS connnections and whether to prefer the client # selected (default) or the server selected # Our default SSL Cipher Suite tries to be reasonably fast and strong. CONFIG proxy.config.ssl.server.cipher_suite STRING RC4-SHA:AES128-SHA:DES-CBC3-SHA:AES256-SHA:ALL:!aNULL:!EXP:!LOW:!MD5:!SSLV2:!NULL CONFIG proxy.config.ssl.server.honor_cipher_order INT 0 CONFIG proxy.config.ssl.server_port INT 443 # Client certification level should be: # 0 no client certificates # 1 client certificates optional # 2 client certificates required CONFIG proxy.config.ssl.client.certification_level INT 0 # Server cert filename is the name of the cert file # for a single cert system and the default cert name # for a multiple cert system. CONFIG proxy.config.ssl.server.cert.filename STRING server.pem # Server cert chain filename is the name of the cert chain file # for a single cert system. CONFIG proxy.config.ssl.server.cert_chain.filename STRING NULL # This is the path that will be used for both single and # multi cert systems. CONFIG proxy.config.ssl.server.cert.path STRING etc/trafficserver # Fill in private key file and path only if the server's # private key is not contained in the server certificate file. # For multiple cert systems, if any private key is not contained # in the cert file, you must fill in the private key path. CONFIG proxy.config.ssl.server.private_key.filename STRING NULL CONFIG proxy.config.ssl.server.private_key.path STRING etc/trafficserver # The CA file name and path are the # certificate authority certificate that # client certificates will be verified against. CONFIG proxy.config.ssl.CA.cert.filename STRING NULL CONFIG proxy.config.ssl.CA.cert.path STRING etc/trafficserver ################################ # client related configuration # ################################ CONFIG proxy.config.ssl.client.verify.server INT 0 CONFIG proxy.config.ssl.client.cert.filename STRING NULL CONFIG proxy.config.ssl.client.cert.path STRING etc/trafficserver # Fill in private key file and path only if the client's # private key is not contained in the client certificate file. CONFIG proxy.config.ssl.client.private_key.filename STRING NULL CONFIG proxy.config.ssl.client.private_key.path STRING etc/trafficserver # The CA file name and path are the # certificate authority certificate that # server certificates will be verified against. CONFIG proxy.config.ssl.client.CA.cert.filename STRING NULL CONFIG proxy.config.ssl.client.CA.cert.path STRING etc/trafficserver ############################################################################## # # ICP Configuration. NOTE! ICP is currently broken NOTE! # ############################################################################## # icp modes # enabled=0 ICP disabled # enabled=1 Allow receive of ICP queries # enabled=2 Allow send/receive of ICP queries CONFIG proxy.config.icp.enabled INT 0 CONFIG proxy.config.icp.icp_interface STRING NULL CONFIG proxy.config.icp.icp_port INT 3130 CONFIG proxy.config.icp.multicast_enabled INT 0 CONFIG proxy.config.icp.query_timeout INT 2 ############################################################################## # # Scheduled Update Configuration # ############################################################################## CONFIG proxy.config.update.enabled INT 0 CONFIG proxy.config.update.force INT 0 CONFIG proxy.config.update.retry_count INT 10 CONFIG proxy.config.update.retry_interval INT 2 CONFIG proxy.config.update.concurrent_updates INT 100 ############################################################################## # # Socket send/recv buffer sizes (0 == don't call setsockopt() ) # ############################################################################## # out: proxy -> os connection # in : ua -> proxy connection CONFIG proxy.config.net.sock_send_buffer_size_in INT 262144 CONFIG proxy.config.net.sock_recv_buffer_size_in INT 0 CONFIG proxy.config.net.sock_send_buffer_size_out INT 0 CONFIG proxy.config.net.sock_recv_buffer_size_out INT 0 ############################################################################## # # User Overridden Configurations Below # ############################################################################## CONFIG proxy.config.core_limit INT -1 ############################################################################## # # Debugging # ############################################################################## # Uses a regular expression to match the debugging topic name, performance # will be affected! CONFIG proxy.config.diags.debug.enabled INT 0 CONFIG proxy.config.diags.debug.tags STRING http.*|dns.* # Great for tracking down memory leaks, but you need to use the # ink allocators CONFIG proxy.config.dump_mem_info_frequency INT 0 ############################################################################## # # Slow Log # ############################################################################## # Log any request that takes more then x number of milliseconds, needs # to be > 0 to be enabled CONFIG proxy.config.http.slow.log.threshold INT 0 ############################################################################## # # Thread pool for "misc" tasks, plugins etc. 2 is a good minimum. # ############################################################################## CONFIG proxy.config.task_threads INT 2
############################################################### # ############################################################### # droplets map http://droplets.xsf.ximad.com http://127.0.0.1:12000 reverse_map http://127.0.0.1:12000 http://droplets.xsf.ximad.com map http://api.droplets.xsf.ximad.com http://127.0.0.1:12100 reverse_map http://127.0.0.1:12100 http://api.droplets.xsf.ximad.com map http://00.static.transact.xsf.ximad.com http://127.0.0.1:12300 reverse_map http://127.0.0.1:12300 http://00.static.transact.xsf.ximad.com map http://00.static.xsf.ximad.com http://00.static.xsf.ximad.com:8000 reverse_map http://00.static.xsf.ximad.com:8000 http://00.static.xsf.ximad.com ############################################################### ############################################################### ############################################################### map http://ioswebshop.ximad.com http://ioswebshop.ximad.com:8000 reverse_map http://ioswebshop.ximad.com:8000 http://ioswebshop.ximad.com map http://iosbookstore.ximad.com http://iosbookstore.localhost:8000 reverse_map http://iosbookstore.localhost:8000 http://iosbookstore.ximad.com map http://content.ximad.com http://content.localhost:8000 reverse_map http://content.localhost:8000 http://content.ximad.com map http://rssreader.ximad.com http://rssreader.localhost:8000 reverse_map http://rssreader.localhost:8000 http://rssreader.ximad.com map http://wp7.ximad.com http://wp7.localhost:8000 reverse_map http://wp7.localhost:8000 http://wp7.ximad.com map http://testiws.ximad.com http://testiws.localhost:8000 reverse_map http://testiws.localhost:8000 http://testiws.ximad.com map http://annashop.ximad.com http://annashop.localhost:8000 reverse_map http://annashop.localhost:8000 http://annashop.ximad.com map http://androidwebshop.ximad.com http://androidwebshop.localhost:8000 reverse_map http://androidwebshop.localhost:8000 http://androidwebshop.ximad.com
