Hi, I tested my application and checked for the renderCount variable. I made a breakpoint and checked the variable in the Debugger. Surprisingly, the renderCount variable was not increased and remained 0 during the whole test.
To verify my result, I made a System.out.println in the constructor of Page2 that showed the PageID and the value of renderCount variable. The result was the same. It looked like the following: (1) Tab1 starts with Page1, url is: localhost:8080/myapp?0 PageID: 2 renderCount: 0 (2) Tab2 starts with Page1, url is: localhost:8080/myapp?1 PageID: 2 renderCount: 0 (3) Tab1 makes a submit from Page1 to Page2, url is: localhost:8080/myapp?2&q=word1 PageID: 2 renderCount: 0 (4) Tab2 makes a submit from Page1 to Page2, url is: localhost:8080/myapp?3&q=word2 PageID: 3 renderCount: 0 (5) Tab1 clicks on a link, the link does not work, but the page is rerendered, url is: localhost:8080/myapp?4&q=word1 PageID: 4 renderCount: 0 (6) Tab1 clicks on a link, the link works as expected and the page is rerendered, url is: localhost:8080/myapp?5&q=word1&filter=linkPage1 PageID: 5 renderCount: 0 (7) Tab2 clicks on a link, the link does not work, but the page is rerendered, url is: localhost:8080/myapp?6&q=word2 PageID: 6 renderCount: 0 (8) Tab2 clicks on a link, the link works as expected and the page is rerendered, url is: localhost:8080/myapp?7&q=word2&filter=linkPage2 PageID: 7 renderCount: 0 (9) Tab2 clicks on another link, the link works as expected and the page is rerendered, url is: localhost:8080/myapp?8&q=word2&filter=linkPage2;linkPage2b PageID: 8 renderCount: 0 You can see, that the renderCount does not increase and the links need a rerender of the pages when the pageID is not the highest. Any ideas about such a constellation? Andre On Tue, 6 Mar 2012 09:13:26 +0200 Martin Grigorov <mgrigo...@apache.org> wrote: > 2012/3/5 Andre Schütz <andre-p...@gmx.de>: > > Hi, > > > > thank you for the answer. I will test this and reply with my results. > > > > I have three questions depending on the test you have mentioned. > > > > (1) > > Can you tell me more about this o.a.w.Page? I did not really find > > something about it. > > org.apache.wicket.Page > > > > > (2) > > Can you explain me a little bit more in detail, what I should try > > to find out with the breakpoint regarding the 'renderCount'. What > > could be the interesting parts regarding 'renderCount'? > > See why renderCount is incremented after the the html generation. > > > > > (3) > > I have my .html files stored in src/main/html, my .properties files in > > src/main/resources and modified my pom.xml with: > > > > <build> > > <resources> > > <resource> > > <filtering>false</filtering> > > <directory>src/main/resources</directory> > > </resource> > > <resource> > > <directory>src/main/html</directory> > > </resource> > > <resource> > > <filtering>false</filtering> > > <directory>src/main/java</directory> > > <includes> > > <include>**</include> > > </includes> > > <excludes> > > <exclude>**/*.java</exclude> > > </excludes> > > </resource> > > </resources> > > <testResources> > > <testResource> > > <filtering>false</filtering> > > <directory>src/test/java</directory> > > <includes> > > <include>**</include> > > </includes> > > <excludes> > > <exclude>**/*.java</exclude> > > </excludes> > > </testResource> > > </testResources> > > > > If I start the jetty server, I get a MarkupNotFoundException. After storing > > the > > .html files to the class files in the src/main/java path, it works and only > > the > > properties files are not found. > > > > Can you tell me, how I have to modify the pom.xml that it will find the > > .html > > and the .properties files in their different paths? > > I guess you need to reimport the project in your IDE so that it also > knows about these additional source folders > > > > > Thank you, > > Andre > > > > > > On Mon, 5 Mar 2012 09:49:38 +0200 > > Martin Grigorov <mgrigo...@apache.org> wrote: > > > >> Hi, > >> > >> It sounds to be related to Page#renderCount. > >> 'renderCount' is used to prevent using an obsolete version of a page > >> instance. I.e. a page with a given page id counts how many times it > >> has been rendered. If you have a tab/window which contains an earlier > >> version of that page and you click on it then this click should be > >> prevented because it will work with stale data. > >> In your description I don't see how this may happen. There is > >> something more which is not included in your description. > >> I recommend you to put a break point in o.a.w.Page and see why > >> 'renderCount' changes and another in PageProvider#getPageInstance() to > >> see why the requested 'renderCount' is different than the current one. > >> > >> 2012/3/4 Andre Schütz <andre-p...@gmx.de>: > >> > Hello, > >> > > >> > i have a question about the behavior of links in two tabs. > >> > > >> > I have an application that I opened in two tabs. In Tab1, I > >> > make a submit from Page1 and get Page2. At the same time, > >> > I make a submit in Tab2 from Page1 to Page2. The two pages > >> > with the name Page2 in the two tabs display the results of > >> > a search, depending on the search word in the respective > >> > Page1. > >> > > >> > Finally, I get the following urls: > >> > > >> > (1) Tab1 makes a submit from Page1 to Page2, url is: > >> > localhost:8080/myapp?2&q=word1 > >> > (2) Tab2 makesa a submit from Page1 to Page2, url is: > >> > localhost:8080/myapp?3&q=word2 > >> > > >> > You can see, that the only difference is the search word > >> > in q= and the page id which is 2 for Tab1 and 3 for Tab2. > >> > > >> > My problem is the following: > >> > --------------------------------- > >> > I have some filter links (not Bookmarkable) on Page2 which you can use to > >> > filter the results. If you click on such a link, the PageParameters will > >> > be updated and the value of the link will be added to the PageParameters > >> > as additional filter. > >> > > >> > Theses two scenarios are happening: > >> > > >> > (a) > >> > If I click on a filter Link in Tab1, the link does work like expected. > >> > The page will be reloaded and gets a new page ID which is bigger than the > >> > ID in Tab2. After this reload of the page, the links work as expected. > >> > > >> > (b) > >> > If I click on a filter Link in Tab2 (which already has a higher page ID > >> > than > >> > Tab1) the links work as expected. > >> > > >> > > >> > To sumarize it: > >> > > >> > The links do not work on a page that has a smaller Page ID than another > >> > tab in the same browser. After the reload of the page by clicking on a > >> > link and getting the highest Page ID, the links work as expected. > >> > > >> > Anybody an idea why that can happen? > >> > > >> > Thanks in advance, > >> > Andre > >> > > >> > --------------------------------------------------------------------- > >> > To unsubscribe, e-mail: users-unsubscr...@wicket.apache.org > >> > For additional commands, e-mail: users-h...@wicket.apache.org > >> > > >> > >> > >> > >> -- > >> Martin Grigorov > >> jWeekend > >> Training, Consulting, Development > >> http://jWeekend.com > >> > >> --------------------------------------------------------------------- > >> To unsubscribe, e-mail: users-unsubscr...@wicket.apache.org > >> For additional commands, e-mail: users-h...@wicket.apache.org > >> > > > > > > -- > > Andre Schütz <schuetz.an...@gmx.net> > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: users-unsubscr...@wicket.apache.org > > For additional commands, e-mail: users-h...@wicket.apache.org > > > > > > -- > Martin Grigorov > jWeekend > Training, Consulting, Development > http://jWeekend.com > > --------------------------------------------------------------------- > To unsubscribe, e-mail: users-unsubscr...@wicket.apache.org > For additional commands, e-mail: users-h...@wicket.apache.org > -- Andre Schütz <schuetz.an...@gmx.net> --------------------------------------------------------------------- To unsubscribe, e-mail: users-unsubscr...@wicket.apache.org For additional commands, e-mail: users-h...@wicket.apache.org