In the UK we have special drip trays for those pubs who don't have the
pint-etch oversized glass.
Basically it works like this - When a pint of lager or cider is poured it is
filled to the brim that includes a froth of head. The pint glass is left to
settle for a few moments (just 4 or 5 seconds) and then the bar lady/gent
recommences pouring the liquid into the glass starting at a slight angle and
then returning to an upright. During the process lager, or cider, is
allowed to run down the side of the glass so that you're almost left with a
miniscus on the top of the drink. The overspill runs into traps underneath
each fount. The glass is placed on a driptray stand with some of the glass
being still wet.
This is how it happens in every pub I go into on a Friday and Saturday
night.
Normally the first thing you do at the bar is to sip-off the top of the
drink so that you don't spill any as you wallk from the bar.
Recently the UK has been importing magners cider from Ireland. This comes
in pint bottles.
In this case you are handed a pint glass at the bar with an opened bottle of
magners.
"Why would they hand yo ua glass and not just fill it for you?" I hear you
say. Well it's traditional to serve irish cider in a glass full of ice
cubes.
However - I do love myths - since every time I visit Ireland I've never been
given a cider with ice in it!
From: Pat Naughtin <[EMAIL PROTECTED]>
Reply-To: [EMAIL PROTECTED]
To: "U.S. Metric Association" <[email protected]>
Subject: [USMA:34445] Re: Wolf in sheeps clothing
Date: Wed, 14 Sep 2005 08:22:31 +1000
Dear Stephen,
To the best of my knowledge (and memory) there was little, if any,
political
resistance to metrication in Australia. I understand that a small group was
formed but after they expressed their anti-metric views to the Metric
Conversion Board (MCB) they were invited to meet with board members and
other MCB staff to discuss their views at length. Following a day or twos
discussions, at the MCB's expense, the metric resisters went their way and
were not heard of again; apparently the board members were able to explain
to them why each of the major decisions had been made and this satisfied
the
protesters. I was not personally involved with these talks; my source was
one of the participants.
The political decision to 'Go metric' from 1970 was largely made on the
basis of the success of decimal currency in 1966. All political parties
voted for the legislation and from then on it was regarded as a 'done deal'
and since the metrication process was well managed by the Australian Metric
Board there was no back sliding later.
As an outsider, it seems to me that the metrication process in England is
not about the decision to 'Go metric' but about some poor decisions on how
to go about the metrication process. For example, instead of rethinking the
'pints in pubs issue' and reforming the cheating due to sales of froth as
liquid that had been going on (since say 1824 at least) the metric
authorities chose to continue to perpetrate the deceit by simply redefining
the pint capacity as 568 millilitres and that, as you know, continues the
debate and the endless discussion (with its high emotional content) of this
topic to this day.
Cheers,
Pat Naughtin
PO Box 305 Belmont 3216
Geelong, Australia
61 3 5241 2008
[EMAIL PROTECTED]
http://www.metricationmatters.com
This email and its attachments are for the sole use of the addressee and
may
contain information that is confidential and/or legally privileged. This
email and its attachments are subject to copyright and should not be partly
or wholly reproduced without the consent of the copyright owner. Any
unauthorised use of disclosure of this email or its attachments is
prohibited. If you receive this email in error, please immediately delete
it
from your system and notify the sender by return email.
on 2005-09-05 22.42, Stephen Gallagher at [EMAIL PROTECTED] wrote:
>
> --- Philip S Hall <[EMAIL PROTECTED]> wrote:
>
>>> Why can't the methods used in Australia, New
>> Zealand, South Africa, etc.,
>>> be used here? They worked fine and everyone was
>> still friends afterwards.
>>
>> The Australian programme of conversion is regarded
>> by pro-metrics in the UK
>> as a good model.
>
> It would be interested to know if, in Australia, did
> any political parties or politicians attempt to turn
> metrication into a political issue, with promises to
> cancel the effort.
>
> I'm virtually certain that if the US government were
> to attempt to push through a highly visible
> metrication effort (like the metrication of road
> signs, for example), a significant number of
> politicians, and political hopefuls, would run
> campaigns on a promise to cancel the metrication.
>