I recently posted this email to Rick Leventhal at FoxNews.com.
Jim Dear Mr. Leventhal, I have just finished reading your online article N.J. Burger King Testing Energy-Producing Speed Bump http://www.foxnews.com/story/0,2933,546512,00.html posted on FoxNews.com. In this article you have made an error that detracts significantly from your report. You apparently confused the two distinctly different quantities energy and power. Power is the rate at which energy is produced, used, or transferred. Think "power equals energy divided by time". Conversely, "energy equals power times time". In your article you state, "That force turns gears inside, generating 2000 watts of electricity instantaneously, according to the engineers who designed it." The implication is that some amount of electrical energy is produced in a short period of time. But energy is measured in joules (J), not in watts (W). In the electrical utility industry, they often use kilowatt hours to measure energy; a kilowatt hour is equal to 3600 joules, or 3.6 kilojoules (kJ). The watt (W) is used to measure power. It is defined to be 1 J/s. Let's assume that object 1 transfers 1000 joules (1000 J) of energy over the time span of 1 second (1 s) to object 2 and this generates electricity with 100 % efficiency. The power of this generation event would then be 1000 J divided by 1 s or 1000 W. If instead the transfer of energy and energy production took 0.5 seconds, the power level would be 2000 W. Or if the transfer and generation took 2 seconds, the power level would be 500 W. All of these would of course be the average power levels during the time span of the interaction; between interactions the power level would be zero. The way you should have worded your sentence would be of the form, "That force turns gears inside, generating an average of 2000 watts of electrical power during the time span of the energy transfer, according to the engineers who designed it." The website for New Energy Technology states: "All vehicles in motion possess kinetic energy. The amount of kinetic energy a vehicle possesses is based upon the vehicle’s speed and weight. The faster the vehicle is moving and the more it weighs, the more kinetic energy it possesses." It would have been more informative if you had given us a typical value for interaction time and the power produced during that span of time OR a typical value for the amount of kinetic energy delivered and the amount of electrical energy produced for some typical car and speed circumstance. I encourage you to study the difference between energy and power, and the units used to report them, before writing anything else that uses them in the discussion. regards, /s/ -- James R. Frysinger 632 Stony Point Mountain Road Doyle, TN 38559-3030 (C) 931.212.0267 (H) 931.657.3107 (F) 931.657.3108 -- James R. Frysinger 632 Stony Point Mountain Road Doyle, TN 38559-3030 (C) 931.212.0267 (H) 931.657.3107 (F) 931.657.3108