Thank you for the follow up. Is this the only resolution? Thank you
Mark From: Michael West <michael.w...@ettus.com> Date: Tuesday, October 10, 2017 at 4:00 PM To: Mark Koenig <mark.koe...@iubelttechnologies.com> Cc: "usrp-users@lists.ettus.com" <usrp-users@lists.ettus.com> Subject: Re: [USRP-users] ADC Self-Test FAILED Hi Mark, Update UHD to a newer version. The head of the maint branch or the latest 3.10.2.0 release should work. The ADC self test is skipped when supplying "recover_mb_eeprom" as of UHD 3.10.0.0. Regards, Michael On Tue, Oct 10, 2017 at 12:32 PM, Mark Koenig via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: Just following up on the message I sent out 8 days ago. Does anyone have any resolution to this issue? I have seen other people have the problem, but have yet to find a fix. Thanks Mark From: Mark Koenig <mark.koe...@iubelttechnologies.com<mailto:mark.koe...@iubelttechnologies.com>> Date: Monday, October 2, 2017 at 10:18 AM To: "usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>" <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> Subject: ADC Self-Test FAILED All, I am getting the following output when trying to recover the mb EEprom. Can anyone be of assistance? Thank you Mark [root@localhost utils]# ./usrp_burn_mb_eeprom --args="recover_mb_eeprom,addr=192.168.20.2" --values="revision=4" linux; GNU C++ version 4.8.5 20150623 (Red Hat 4.8.5-16); Boost_105300; UHD_003.009.000-0-gcd88f80f Creating USRP device from address: recover_mb_eeprom,addr=192.168.20.2 -- X300 initialization sequence... -- Determining maximum frame size... 1472 bytes. -- Setup basic communication... -- Loading values from EEPROM... UHD Warning: UHD is operating in EEPROM Recovery Mode which disables hardware version checks. Operating in this mode may cause hardware damage and unstable radio performance! -- Setup RF frontend clocking... -- Radio 1x clock:200 -- Detecting internal GPSDO.... Found an internal GPSDO -- Initialize Radio0 control... -- Performing register loopback test... pass -- Initialize Radio1 control... -- Performing register loopback test... pass Error: RuntimeError: ADC self-test failed! Ramp checker status: {ADC0_I=Bit Errors!, ADC0_Q=Good, ADC1_I=Good, ADC1_Q=Good} _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
