On 10/28/2017 11:27 AM, Felipe Augusto Pereira de Figueiredo via
USRP-users wrote:
Dear All,
This link from Ettus:
https://kb.ettus.com/UHD
says the following:
Sample streaming
UHD handles the control for transporting I and Q samples (see here
<http://www.ni.com/tutorial/4805/en/> for information on I and Q
samples) by using standard interface methods such as Ethernet, USB and
PCI-Express. Samples can be sent in a continuous stream as in figure
4a or in bursts, figure 4b. *In addition the user has the ability to
specify when samples are received or transmitted by using built in
burst and timed commands.*
The last phrase states that it is possible to receive IQ samples when
samples are received. Does it mean there is a way to specify the time
to receive samples just like we do with TX samples? If that is true,
could you tell us how that can be done? I have been looking for an
example on how to do that but it was to no avail.
Thanks and Kind Regards,
Felipe Augusto
See the "rx_timed_samples" example code.
_______________________________________________
USRP-users mailing list
[email protected]
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
