I also had that issue. None of calibration utility worked. At the end of the procedure they were all aborted. As a workaround I replaced threads.interrupt_all() and boost::this_thread::interruption_requested() to just set/get boolean flag. Perhaps it has something to do with boost.
thanks, Dmitry From: Louis Brown via USRP-users Sent: 12 января 2018 г. 2:04 To: usrp-users@lists.ettus.com Subject: [USRP-users] uhd_cal Aborted (core dump) I have a UBX160 in an X310 I'm attempting to calibrate. It crashes at the end and never writes the cal files in ~/.uhd. Does this for all 3 cal routines; TX IQ, RX, IQ, and TX DC. Does it on two separate X310 on two separate machines. Any idea what's wrong? For reference: https://github.com/EttusResearch/uhd/blob/maint/host/utils/uhd_cal_rx_iq_balance.cpp Thanks, Lou uhd_cal_rx_iq_balance --verbose --args "addr=192.168.40.2" --freq_start=1.60E9 --freq_stop=1.61E9 linux; GNU C++ version 7.2.1 20170915 (Red Hat 7.2.1-2); Boost_106400; UHD_003.010.002.000-3-g122bfae1 Creating the usrp device with: addr=192.168.40.2... -- X300 initialization sequence... -- Determining maximum frame size... 8000 bytes. -- Setup basic communication... -- Loading values from EEPROM... -- Setup RF frontend clocking... -- Radio 1x clock:200 -- Detecting internal GPSDO.... Found an internal GPSDO: LC_XO, Firmware Rev 0.929a -- [DMA FIFO] Running BIST for FIFO 0... pass (Throughput: 1304.6MB/s) -- [DMA FIFO] Running BIST for FIFO 1... pass (Throughput: 1304.5MB/s) -- [RFNoC Radio] Performing register loopback test... pass -- [RFNoC Radio] Performing register loopback test... pass -- [RFNoC Radio] Performing register loopback test... pass -- [RFNoC Radio] Performing register loopback test... pass -- Performing timer loopback test... pass -- Performing timer loopback test... pass -- Running calibration for UBX TX -- Daughterboard serial: 30891B2 -- Calibration frequency range: 1600 MHz -> 1610 MHz RX IQ: 1600.000000 MHz: best suppression 87.490202 dB, corrected 37.821619 dB RX IQ: 1607.301587 MHz: best suppression 93.060566 dB, corrected 43.052988 dB terminate called without an active exception Aborted (core dumped) Last couple of entries in the /tmp/uhd.log: -------------------------------------------------------------------------------- -- 2018-Jan-11 16:41:45.871915 - level 6 -- virtual void uhd::rfnoc::radio_ctrl_impl::issue_stream_cmd(const uhd::stream_ -- lib/rfnoc/radio_ctrl_impl.cpp:246 -------------------------------------------------------------------------------- [0/Radio_1] radio_ctrl_impl::issue_stream_cmd() 0 d -------------------------------------------------------------------------------- -- 2018-Jan-11 16:41:45.871927 - level 6 -- virtual void uhd::rfnoc::radio_ctrl_impl::issue_stream_cmd(const uhd::stream_ -- lib/rfnoc/radio_ctrl_impl.cpp:248 -------------------------------------------------------------------------------- [0/Radio_1] radio_ctrl_impl::issue_stream_cmd() called on inactive channel. Skipping.
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
