On 02/19/2018 06:58 AM, Sumit Kumar via USRP-users wrote:
I am using a UHD source in GRC. I configured it to stream from both
the RX ports.
The first port is tuned to 2.437 GHz and the another to 2.435 by
providing a lo_offset of 2MHz.
Samples from first port go under some processing and then have to be
added to samples coming from the second port. When I run my set up,
the green LEDs of the ports blink for once and stop receiving any more.
I am attaching the grc file for reference.
When I run it without the "ADD" block, it streams fine with both the
channels streaming.
Regards
Sumit
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
This is VERY unlikely to be a USRP problem, per se. Best to discuss
this on the discuss-gnuradio mailing list.
I have two-channel B210 flow-graphs that have been running for months
without a problem.
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com