Hi Nate, Now after I did those changes it looks much better. However, seems still there is kind of mirrored spectrum on fosphor plot. I just did simple test with transmitting signal from Zigbee sensor device. Seems signal is mirrored on plot. I will check more tomorrow, and will let you know.
Thanks, Tarik From: Nate Temple [mailto:nate.tem...@ettus.com] Sent: maandag 19 maart 2018 17:54 To: Tarik Kazaz Subject: Re: [USRP-users] RF_NoC fosphor issue (Source IO size "8" does not match sink IO size "8192".) Hi Tarik, Can you please try rebuilding uhd/rfnoc-devel and gr-ettus based off of these commits: https://github.com/EttusResearch/uhd/commit/12a34d6ef6b9666e29a23039291138f989c7c2ce https://github.com/EttusResearch/gr-ettus/commit/30302780a44f3f0b146e9b81f88e70c9d983f559 We have an issue on our internal bug tracker already for this specific bug with the plots. Regards, Nate Temple On Mon, Mar 19, 2018 at 9:37 AM, Tarik Kazaz <t.ka...@tudelft.nl<mailto:t.ka...@tudelft.nl>> wrote: Hi Nate, I was avoiding error by pressing F6. However results that I observe on fosphor plot are a bit strange. Seems spectrum and spectrogram plots are divided in two plots? Also scaling of signal seems to be wrong. I am sending signal of 2MHZ however it seems to be 20MHz on plot. Is bypass good solution to this issue? Kind Regards, From: Nate Temple [mailto:nate.tem...@ettus.com<mailto:nate.tem...@ettus.com>] Sent: maandag 19 maart 2018 17:24 To: Tarik Kazaz Cc: usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com> Subject: Re: [USRP-users] RF_NoC fosphor issue (Source IO size "8" does not match sink IO size "8192".) Hi Tarik, If you press "F6" instead of the "Run" button, it will bypass this warning and run the flowgraph. Regards, Nate Temple On Mon, Mar 19, 2018 at 8:59 AM, Tarik Kazaz via USRP-users <usrp-users@lists.ettus.com<mailto:usrp-users@lists.ettus.com>> wrote: Hi All, I am using USRP X310 with UBX-160MHz. I tried to run RFNoC fosphor demo, however I am getting errors related to connection of RFNoC:Radio to RFNoC: DDC and to RFNoC:Window (Source IO size "8" does not match sink IO size "8192"). I found this discussion on mailing list (from 2016) https://lists.gnu.org/archive/html/discuss-gnuradio/2016-03/msg00366.html. However, I did not manage to make it work. Could you please provide me more information which modifications I should do in order to make it work? KInd Regards _______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com<mailto:USRP-users@lists.ettus.com> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
