Hi ,Robin, thank you for your reply. best regards Jon
2018-05-15 23:30 GMT+08:00 Robin Coxe <robin.c...@ettus.com>: > Hi Jon. First of all, you should not be using a SG1 image with the E313. > All E313s contain E310s with Speed Grade 3 FPGAs. > > The behavior you describe is a result of a corrupted bit in the AVR EEPROM > firmware that results in the power on sequence requiring the power button > to be pushed. This corruption can occur when power is abruptly removed > from the device instead of powering it down cleanly. The most > straightforward way to resolve this issue is to RMA your E313. The latest > revision of the E313 always powers on when power is applied and ignores the > state of the power button. > > -Robin > > > On Sun, May 13, 2018 at 11:19 PM, liu Jong via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> Hi all, >> We have two pieces of E313,the difference of them is one of them insert >> sg1 imges and another insert sg3 image. >> When we take DC power supply(12V) for e313,the sg1's e313 would auto >> start,but for the sg3's e313,we must press power button,then e313 power on. >> Is it normal?How could make auto start for sg3's e313? >> >> best regards >> Jon >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
