Hello, Marcus. Yes. this is the unmodified image. I clone it from https://github.com/EttusResearch/fpga, checkout to rfnoc-devel (in my case commit d1d683bcd87bd3cea56f9654152b53e4830db612), than navigate to "usrp3/top/e300", run "source setupenv.sh" and "make E310_sg3". Best regards, Artyom.
2018-05-20 11:13 GMT+03:00 Marcus Müller <marcus.muel...@ettus.com>: > Hello Artjom, > > Is this the unmodified image? The error basically complains about too much > logic to put on the FPGA, and that doesn't happen with our stock images. > How are you building this? > > Best regards, > Marcus > > > On 19 May 2018 20:16:40 GMT+02:00, "Артем Асадчий via USRP-users" < > usrp-users@lists.ettus.com> wrote: >> >> Hi everyone, >> >> I've got a problem, when try to build E310_sg3.bit: >> >> ERROR: [Place 30-487] The packing of instances into the device could not >> be obeyed. There are a total of 13300 slices in the pblock, of which 7850 >> slices are available, however, the unplaced instances require 9752 slices. >> Please analyze your design to determine if the number of LUTs, FFs, and/or >> control sets can be reduced. >> ERROR: [Place 30-99] Placer failed with error: 'Detail Placement failed >> please check previous errors for details.' >> [00:10:36] Current task: Placer +++ Current Phase: 3.5 Small Shape Detail >> PlacemERROR: [Common 17-69] Command failed: Placer could not place all >> instances >> [00:10:37] Current task: Placer +++ Current Phase: 3.5 Small Shape Detail >> Placement >> [00:10:37] Current task: Placer +++ Current Phase: Finished >> [00:10:37] Process terminated. Status: Failure >> >> ======================================================== >> Warnings: 560 >> Critical Warnings: 39 >> Errors: 3 >> >> Makefile.e300.inc:103: recipe for target 'bin' failed >> make[1]: *** [bin] Error 1 >> make[1]: Leaving directory '/home/artyom/workspace/ettus/ >> rfnoc/uhd/fpga-src/usrp3/top/e300' >> Makefile:63: recipe for target 'E310_sg3' failed >> make: *** [E310_sg3] Error 2 >> >> How can i solve this problem? >> >> > -- > This was written on my cellular phone. whilst an impressive piece of > engineering, this might not be the perfect device to write emails on - > please excuse my brevity. >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
