Thank you,Neel 2018-05-20 2:52 GMT+08:00 Neel Pandeya <neel.pand...@ettus.com>:
> Hello Jong: > > I think Robin answered this in a separate thread with you, so I'm just > responding to conclude this thread. > > The behavior that you describe is a result of a corrupted bit in the AVR > EEPROM firmware that results in the power-on sequence requiring the power > button to be pushed. This corruption can occur when power is abruptly > removed from the device, instead of powering it down cleanly. The most > straightforward way to resolve this issue is to RMA your E313. The latest > revision of the E313 always powers on when power is applied, and ignores > the state of the power button. > > --​Neel Pandeya > > > > > On 3 May 2018 at 00:50, liu Jong via USRP-users < > usrp-users@lists.ettus.com> wrote: > >> Hi all, >> We know that when we insert network cable to e313,the e313 will power on >> and press power button is not needed. Now,we take DC power supply(12V) for >> e313,and we must press power button of e310 and then power on. >> It is normal?How can we achieve power on and no press power button with >> DC power supply for e313? >> >> thank you. >> best regards >> Jon >> >> _______________________________________________ >> USRP-users mailing list >> USRP-users@lists.ettus.com >> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com >> >> >
_______________________________________________ USRP-users mailing list USRP-users@lists.ettus.com http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com