I am successfully using this 10gbe SFP+/LC singlemode 1310nm transceiver
from fs.com.
FS SFP-10GLR-31
I am also using this QSFP+/MTP transceiver (for Intel XL-710 in 4x10gbe
mode)
FS QSFP-PLR4-40G

On Mon, Jul 23, 2018 at 1:10 PM Ashish Chaudhari via USRP-users <
usrp-users@lists.ettus.com> wrote:

> Hi Zhongyuan,
>
> >> Does 10Gbps SFP+ transceiver backward compatible with 1Gbps socket?
>
> No it's not. Depending on what N310 FPGA image you build/use, the port
> speeds are locked down. The HG image is 1G on SFP0 and 10G on SFP1
> whereas the XG image has 10G on both SFP ports. The transceiver might
> support both speeds but the USRP won't.
>
> >> Could you recommend any SFP transceivers that work on your case? both
> >> 1Gbps and 10Gbps.
>
> What speed do you need for your application? What is the speed of the
> switch that you are working with? The solutions for 1Gbps and 10Gbps
> are vastly different. Generally speaking fiber-optics that support
> 10GBASE-SR, -LR and -ER should work with the N310 when the SFP port is
> in 10G mode and optics that support 1000BASE-LX, -SX and -CX should
> work in 1G mode. For Ethernet, I should mention that certain switch
> and NIC vendors explicitly disallow certain non-approved optical
> modules, so on the switch side I would double check with the vendor
> that the transceiver works with your switch. On the USRP side, we
> accept all optics. I haven't used the specific Finisar module
> (FTLX1475D3BCV) but in general we have seen good results with Finisar,
> Amphenol FCI and Elpeus transceivers. We do most of our testing with
> full cable assemblies, although those might be a bit harder to find
> for the lengths that you are looking for.
>
> As a data point here are the ones that are known to work:
>
> https://www.mouser.com/ProductDetail/Finisar/FCBG110SD1C03?qs=sGAEpiMZZMsi6nco80NB4Pt5EfrefmupuvEijLXVquZ4ABfDcakyUQ%3d%3d
>
> https://www.serversupply.com/NETWORKING/TRANSCEIVER/10%20GIGABIT/INTEL/FTLX8571D3BCVIT1.htm
>
> Thanks,
> Ashish
>
>
> On Sat, Jul 21, 2018 at 2:17 PM, Zhongyuan Zhao via USRP-users
> <usrp-users@lists.ettus.com> wrote:
> > Has anyone tried 10G/1G Dual Rate (10GBASE-LR/LW and 1000BASE-LX) 10km
> > 1310nm Single Mode Datacom SFP+ Optical Transceiver?
> > https://www.finisar.com/optical-transceivers/ftlx1475d3bcv
> >
> > Thanks.
> >
> >
> >
> > Zhongyuan Zhao
> >
> > PhD Candidate,
> > Department of Computer Science & Engineering,
> > University of Nebraska-Lincoln
> > Suite 117, Schorr Center,
> > Lincoln, Nebraska 68588-0115
> >
> > On Fri, Jul 20, 2018 at 2:06 PM, Zhongyuan Zhao <zhz...@cse.unl.edu>
> wrote:
> >>
> >> Hi,
> >>
> >> I am working on a project where several N310s are connected to a
> >> fiber-Ethernet switch. The fibers are of single mode with length from
> 1km to
> >> 10km. My problem is selecting the right SFP transceivers.
> >>
> >> Currently, I used the official SFP to RJ45 converter (come from Ettus
> with
> >> N310) followed by another pair of RJ45 to SFP converter.
> >>
> >>
> https://www.amazon.com/gp/product/B06XC1VDMD/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
> >> This is a work around solution. I tried to connect N310 and Dell N3048
> >> switch (2 SFP ports)
> >> directly through a pair of 10Gtek SFP transceivers (1Gbps) that come
> with
> >> the RJ45 to SFP converter but it does not work.
> >>
> >> Could you recommend any SFP transceivers that work on your case? both
> >> 1Gbps and 10Gbps.
> >> Does 10Gbps SFP+ transceiver backward compatible with 1Gbps socket?
> >>
> >> Thank you very much!
> >>
> >> Regards,
> >> Zhongyuan Zhao
> >>
> >> PhD Candidate,
> >> Department of Computer Science & Engineering,
> >> University of Nebraska-Lincoln
> >> Suite 117, Schorr Center,
> >> Lincoln, Nebraska 68588-0115
> >
> >
> >
> > _______________________________________________
> > USRP-users mailing list
> > USRP-users@lists.ettus.com
> > http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
> >
>
> _______________________________________________
> USRP-users mailing list
> USRP-users@lists.ettus.com
> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to