Thanks Jonathon!

I want to send some data block to radio. I need to use uhd on arm and send the 
data. now I want to put the data block on ps memory, and access the data block 
in pl, so I can send the data block in PL direct!

can I setup  my own datamover on another HP AXI port under uhd fpga framework? 
I use uhd-003012,no rfnoc.


Thanks again!


Best Regards,

Carry

________________________________
From: Jon Pendlum <jon.pend...@gmail.com>
Sent: Thursday, August 9, 2018 3:44:43 AM
To: carry chen
Cc: usrp-users@lists.ettus.com
Subject: Re: [USRP-users] about rfnoc nocshell

Hi.

Yes, but you should leave that one alone and setup your own datamover
on another HP AXI port. What do you want to accomplish?

Jonathon

On Sun, Aug 5, 2018 at 11:44 AM, carry chen <artestp...@outlook.com> wrote:
>
> Thanks Jonathon!
> Does uhd fpga use datamover access PS DDR now?
>
> Best Regards,
> Carry
>
> ________________________________
> From: Jon Pendlum <jon.pend...@gmail.com>
> Sent: Monday, July 30, 2018 7:57 PM
> To: carry chen
> Cc: usrp-users@lists.ettus.com
> Subject: Re: [USRP-users] about rfnoc nocshell
>
> Hi,
>
> 1) You cannot reduce noc_shell resource usage much. You can try
> putting all your custom logic in just one RFNoC block, that way you do
> not incur the overhead of multiple noc_shell instances.
> 2) Do you mean "Can I access PS DDR memory directly from the FPGA
> fabric?" If so, yes you can via the HP AXI ports. You'll need
> something to interface with the HP AXI port though. Xilinx's AXI
> Datamover or AXI DMA IP blocks are decent choices.
>
> Jonathon
>
> On Fri, Jul 6, 2018 at 3:26 AM, carry chen via USRP-users
> <usrp-users@lists.ettus.com> wrote:
>> hello,list,
>>
>> I have study the rfnoc,I have 2 question:
>> 1. I find nocshell module use large resource, e310 resource is less, so
>> can
>> I adjust some param to reduce the resoure comsume? I only config one
>> radio(1
>> ddc+1 duc),I find use so many resouce
>> 2.Can I share memory between ps and pl direct?
>>
>> Best,Regards,
>> Carry
>>
>> _______________________________________________
>> USRP-users mailing list
>> USRP-users@lists.ettus.com
>> http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
>>
_______________________________________________
USRP-users mailing list
USRP-users@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com

Reply via email to